Features:

  • Brand : TMH®
  • 10 pcs 12v DC Side Marker Light indicator light 3.8'' x 0.8'' x 0.4" ( 5 Red + 5 Amber )
  • Brightness : 120 lumen each light with 6 pcs High Quality SMD LED 50,000hrs Life Time
  • PC lens + Waterproof + Shock Proof + Dust Proof , UL Listed Power Wire
  • Easy to install with FREE screw set included & Foam tape base
Red and Amber side marker lights

When i ordered these, i saw the size in a comment / or question, still wasn't expecting them to be anything great, but was put off by their small size. Until i installed them on a 21ft x 7 foot C channel trailer. Little things are well made and bright!! I was very pleased, bags, lights and bolts and screws were good, and all in one or two bags Sticky tape backing on rubber seals were easy to take off and use.

Well Made - Nice & Bright - Good Price - Perfect For My Application!!

I bought a 10-pack of these and mounted them on my tour-pak (luggage trunk) on my motorcycle. I put 3 on each side and 4 across the back. This improved my visibility a LOT - Especially at night!! These LED lights are pretty bright and you can plainly see them during the day as well. Thats just what I wanted for this motorcycle - for people to see me better. I used these shorter LED lights because this tour-pak is rounded on the sides and back. One long flat LED light would difficult to mount properly on this kind of surface... And these shorter ones worked perfectly!! I've added a couple of pictures. (-: I have only small complaint... These are mounted with 2 small phillips head screws and nuts for each light - The nuts require a 5.5mm socket. Well, I received extra nuts - but they shorted me on the phillips head screws by one - I got 19, but needed 20!! It took me a little while to find a screw and nut (because it had different threads) that tiny that would work. The one I found needed the head ground a little smaller to fit in the light correctly... So I chucked it up in my drill to spin it and ground the head smaller with my bench grinder - And it worked!! (-: This was a bit of an inconvenience for sure - But I still give these lights 5 stars because they are well made and come with a nice gasket too. Plus these have a pretty good rating and have a good price too at less than a $1 each - I paid $8.95 for 10 of them!!

I love these lights

I love these lights. I put them under my truck and it give the truck a different look at night. I get many unexpected compliments on how good my truck looks. I have had people ask me to put some on their vehicles. These are great light for the price. I went to one of the local truck/suv accessory shops and they wanted 6x more than what I paid for these lights and to put them on was another $250. These are worth the price. I also have some blue ones but i can't put them on due to local laws. I will probably put them on my trailer.

So far, a year later still working and they Ended overload on wiring

1 year of use, still good, Installed these on a trailer project and did video " Double Axle Trailer Build from Salvaged RV frame Pt. 4 The Emma 1 " you'll have to search for that one, Very low power draw after also installing 16 total on a 34 foot travel trailer. Pulls less than half the amps the old lights used. Very dramatic appearance upgrade too. Only fault I can see is the wire gauge is SO SMALL its hard to get a permanent connection.

exactly as advertised and pretty darn bright

the dimensions are spot on and the lights are about as bright as my 150 lumen rated flashlights. The only real difference is the pattern of light thrown; these spread it over a reasonably wide area and work well as auxiliary interior lights in any 12 volt vehicle, or on a DC power supply around the house. Of note; the small domed lenses of the 6 LED chips are slightly different heights from the ends inward, so the pattern changes slightly - this is NOT a negative - it throws a very useful pool of light with a bit more intensity toward the middle. The lens has a secondary diffusion reflector pattern molded into it, and appears to be glued on. This seems to spread the light a bit more so its not a hard edged light pattern, and the glued on lens seems reasonably watertight in my tests thus far. The wires are somewhat thin, about 20g or so, but not at all difficult to solder in.

See The Light

Before installing on my boat trailer, which is often dunked in water, I checked these LED's to ensure they are indeed waterproof. Yes, they do work after and during submersion in fresh water. I placed one LED strip under water overnight and tested it the next day. The LED lights are all illuminated and no problems at all. They look and perform well. Will buy these again for other applications, as needed.

The cat's meow, perfect for my needs.

Perfect for my project. Testd all the markers and they work. They have a 2 wire lead that is about 7 1/2 inches long. The marker is just under 4 inches in length, 3/4 width, and just under 7/8 in thickness without the included self adhesive gasket. The vendor supplied a package of nuts, washers, and bolts. I required a marker of a low profile to fit flushly on the side of my 1990 30 foot Coachman Travel Master motorhome which uses corrugated fiberglass siding for structural side wall strength. These LED lights fit flush in the valley area of the siding. These look perfect.for the project. Now I will wire these up to be side markers with the parking lights and will float the ground with the turn circuit so marker can signal my intention to change lane or turn. Also since they are diode lights, auto relays have to be used if the ground is to be floated between the turn and marker positive voltage circuit. Wire the left and right side each on a separate relay. When the marker lights are on and a turn signal is turn on the markers will flash in out of phase with the vehicle's front and rear signal lights. If the parking light circuit is off then these LED side marker will flash with the other turn signals. In bright day light the markers are not that visible. At night the are very good. Not overly bright to be distracting.

Better than expected.

Actually very good quality at a very affordable price!

AWESOME Perfect fix for my golf cart and trailer.

One of my old tail light fixtures on my golf cart was rusted out on the inside so I couldn't replace the bulb. In fact the bulb was actually still good. So, I took a pair of these TMH led marker lights and put them inside the existing tail light covers and boom, instant led taillights on the golf cart. Much cheaper than a set of new tail lights. In fact a set of taillights here on amazon is like 27 dollars, I got ten of these for 9 bux and free shipping. A+ indeed. Will be putting the rest on my trailer soon...

Excellent LED markers for the price. Easy two wire installation

Bright LEDS for a very low price. These are totally plastic lights and require 3 holes for each installation. One in each end for screws and one in the middle for wires. They do not need to be large holes but still holes nonetheless. I am using them as turn signals and they outshine the incandescent bulbs of the original turn signals. For the price these are great. May want to buy extra though as I am betting the plastic may crack under harsh use. I have not broken mine but just a warning.

Full Reviews