Features:

  • Practical: The ABN Bearing Race and Seal Bush Driver Set with Carrying Case – Master / Universal Kit for Automotive Wheel Bearings allows for easy race seal installation without damaging the axle housing
  • Sizes: Includes 1 driver and 9 collar/discs: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995", 3.180"; Listed diameter is the diameter at the larger top side of the taper, not the end closest to the handle
  • Compatible: Collars fit standard race sizes used in most wheel bearing applications
  • Durable: Constructed from high-strength aluminum for extra strength and longevity; Won't mar the bearing
  • Easy Storage: Heavy-duty 10” x 5.8” x 4” (25.4cm x 14.7cm x 10.2cm) blow-molded plastic carrying case for easy transport, simple storage, and quick organization
Great weekend warrior bushing press set

This is exactly what most of us are wanting. A decent, inexpensive set of bushing drivers to take care of a job like wheel bearing bushings or bushings on a transmission on our personal vehicle and maybe a buddy or two. A set that will probably be used only on rare occasion so we want something to get the job done while realizing we aren't going to use it much and thus don't need to spend $100 plus on a set intended more for a mechanic shop. This is exactly that set. You could rent a set like this from an autoparts store, but then you have to drive there to rent it and drive back to return it. This is $30 and should be good for the rest of a weekend warrior's life.

It worked on a stubborn pinion bearing race.

It does what I asked of it. Drove in a very tight pinion bearing race on a Dana 30 front axle. It would have been nice if the handle / beater bar was a bit longer for my use, but I seriously beat on it and it did the job and survived. Being made of aluminum to prevent race damage, I honestly thought that I was going to destroy it as hard as I hit the handle with a lead mallet. But its good to go for more abuse. Hard to beat for the price. Pun intended.

Many sizes. Did what I needed it too. Good value.

This type of tool is pretty generic and have been the same for years. This set came with lots of sizes that match the type of stuff we do for off road and 4x4 axles, suspensions, and engines. It did the job and is suite to purpose. Good value.

Simple yet Effective

As advertised. Nice quality. Nicely machined aluminum surfaces. This kit made removing and inserting seals/bearings during my motorcycle engine rebuild a breeze - much better than trying to find sockets to fit. The large, flat, smooth surface helps to ensure and verify bearings and seals are seated fully and/or flush with the outer surface. The driver handle is also aluminum so if you have a stubborn bearing you'll fairly easily smash/indent the end of the handle when hammering. I'm assuming this is intended by design to ensure you're not damaging the bearing during install - if you properly heat/freeze things the bearing should drop in with little force. If you have to hit the driver handle hard enough to damage it beyond use you're doing something wrong. A very simple and effective tool set. Look closely at the sizes in this kit - they are not for small bearings/seals.

Works like it should

Made of aluminum so it won't mar bearing. The blow mold box has an alpha numeric size code but there is no key for the code to help with size. As more than one will fit the application, you have to intuit which option is correct. All in all it does what it is supposed to do. Line it up, wack at it and the object goes in. Not rocket science but it works.

It had the perfect size and made installing the bearings and seals SOOOO ...

Used this set while changing axle bearings and seals on my 2001 Jeep TJ with the Dana 35 rear. It had the perfect size and made installing the bearings and seals SOOOO much easier. Worth the price for even one job. Just a tip, if you aren't familiar with installing them, turning one of the larger sizes backwards and putting in a flanged seal makes it MUCH easier than trying to center the smaller ones.

Worked great for driving an axle seal into the rear housing

Worked great for driving an axle seal into the rear housing. I needed something 2-3/4" OD and this set didnt have one that was exactly 2-3/4" but the next size down worked fine.

High Quality

I'm a backyard mechanic, but I need to change bearings periodically on my boats and trailers, etc. The ABN Bearing Race and seal Bush Driver is so much easier to use than a socket that slip off and often times ruins your seal of nicks the race, etc I'm very happy with my purchase. Good quality too.

Fast shipping, good packaging and item is as described

I needed this set ASAP to go with my new 20 Ton press from Harbor Freight. I was chaning out all the front bushing on my 1999 Lexus GS400. This kit had the right sizes to press out the old bushings. What the most surpising thing was I ordered this item at 11pm the night before and sprung to pay “Next Day Shipping”. It literally came the next day even after ordering so late the nihht before. The kit is worth the money and is a great addition to my new 20 ton press.

solid product

Did not mark up the bearing races I had to install what so ever. considering that I was doing a medium duty truck and this kit isn't made to have that large of a size I was still able to install the race with a rubber mallet and then chase it in with the largest bearing installer that was in the kit. it did not sit properly around the outside of the race but nearly in the middle and even so it did not mark up the interior of the race at all. only issue I saw was on the largest bearing installer the driver was a really tight fit. nothing a couple passes of sand paper wouldn't take care of.

Full Reviews