Features:

  • DUAL MONITOR STAND – This desk arm holds 13, 15, 17, 19, 20, 21, 23, 24, 27 Inch monitors from SAMSUNG, ACER, VIEWSONIC, LG, DELL, HP, ASUS, AOC and Emachines. It has a universal fit and will work with any monitor that has VESA hole pattern of 75x75 (3”x3”) and 100x100 (4”x4”).
  • FULL MOTION – Tilt: -45 to +45 Degree - Swivel: 360 Degree - Rotate: 360 Degree. Both articulating arms swivel left or right for best horizontal angle adjustment. The arms are height adjustable on the pole. Tilt angle adjustment reduces glare.
  • VERSATILE BASE – Dual monitor stand comes with a clamp base and a grommet base. Clamp height is adjustable to fit various desk thickness. Modular design allows grommet installation.
  • EASY INSTALLATION – Install the pole with clamp or grommet base. Connect the removable VESA heads to the back of your monitor and slide into the arms. The VESA head height can be adjusted up to 1” to perfectly align the height of monitors.
  • HEAVY-DUTY – High-strength steel offers a carrying capacity of 22 lbs at each arm. Install your monitors with confidence. Cable management clips keep installation clean.
Get this one.

I just received and installed. FYI, I looked at a bunch of these with prices all over the place. I purchased this because it was cheap. I was pleasantly surprised when it showed up. Packaging was very well done. The entire thing was in its own box, each piece was in its own additional box. Screws and such were in their own sealed packages. Instructions were clear and easy. I had this installed in 30 minutes. I was worried it would not support two 24" monitors. It does a fantastic job. A few of the joints needed additional tightening, but all the necessary tools you need to install came with it. It includes clips for cable management and is way better than I could have expected for the price. I highly recommend this product.

A stripper pole for your desk!

I'm more of a "set it and forget it" type of person when it comes to my monitor, so I was looking at these types of arm mounts instead of the fully adjustable ones. I use it on my standing desk clamped to a 1.25" piece of hardwood. I use this to hold up my 27" dell 4k monitor. The pictures of the mount don't look like much but it's burly and high quality in person. Height: What I liked most is the pole is a couple inches taller than the others at 18" high. I'm tall and looking down at a monitor gives me neck pain. I have the arm at the very top of the pole and its sturdy. Setup: Easy to do solo. There is a channel that lets you drop in the VESA mount so you can easily take the monitor on/off in between adjustments. I use my monitor as a USB hub so I have a ton of wires going back and forth and I was able to fit it all into the wire management system. The clamp is beastly and I there was no need to drill a hole into my nice hardwood top. There is a thin layer of padding on the inside of the clamp that sits on the top of the desk. I would've liked the piece that contacts the bottom of the desk to have this padding also. Sturdiness: Initially there was some acceptable shakiness with the monitor but after I tightened down all the bolts again there was much less wobble. There is movement only when I'm adjusting the height of my sit/stand desk and when I really bump into the desk. Adjustability: There is actually some movement you can do with this stand. You can rotate the monitor from side to side. You can also maneuver the arm, even after you've tightened the bolts down. You CANNOT adjust the height or tilt of the monitor once it's locked in.

Sturdy and simple to install

I was surprised when this arrived at how well built and sturdy it was for the price. You could defend your home with this thing against robots. The only issues I ended up with is where I wanted it placed for perfect screen positioning there was a divider between lower drawers and I could not drill there. The spot to either side made it 1/2" too short or too long to fit my ultrawide monitor between the upper cabinets so it couldn't raise to the height I wanted. I ended up ordering an articulating arm mount that could reach further and was dual so I didn't have to drill another hole as originally planned, but this was so good my wife wanted it, so we didn't return it either and just switched to clamp mount for her desk. I can say it works well as grommet or clamp install.

A great stand as long as you don't need to move the monitors around

I purchased this stand to use with two Dell 24 inch monitors. It works beautifully and I am very happy with it. There are much more expensive stands that allow more freedom of movement and have gas pistons for smooth movement, but I didn't need any of that. If you are constantly going to be readjusting the monitors or moving them so someone else can see the screen, this might not be the best stand for you. But if you are going to set up two monitors side by side and not move them around, this is a fabulous stand and a great value. It was easy to assemble, plenty strong enough for the monitors I bought and only required me to move the desk about 4 inches away from the wall. This type of monitor stand used to be much more expensive and I was a little skeptical that they had come down in price so far, but I am very happy with this stand.

Very good product at an excellent price

I was very impressed with how well this stand works for my dual monitor set up. I even prefer it over the far pricier pneumatic arm stands we have at work for our dual monitor set ups. This one works best if you prefer to keep your monitors side by side at equal heights, which is my preference. Depth can be adjusted easily while keeping the monitors perfectly aligned. The pneumatic arm mounts cannnot do that as well despite costing far more. If you prefer to constantly move your monitors around without needing precise alignment, then this isn't the product for you. For people like me that like their monitors just right and then don't mess with them again, this is the perfect stand. It was also easy to set up, as well. The only downside is that the cord clips can break if stretched too far; however, the cords can simply be wound around the arm itself among many other solutions. Not a huge drawback.

Worth Every Penny!

Bought this mount to use with a new Pixio 32" monitor. The mount arrived in to days and as soon as I opened it I knew this mount was beefy enough to handle a 32" monitor and I wasn't wrong! Installation couldn't be easier, they provide the parts to either campt it to a surface or drill a dole and permanently mount the arm. I have the arm of the mount almost fully suspended out and it barely know the monitor is attached, it is easily adjustable and can all the joints and tilt functions can be tightened to meet any users requirements. For the 34 dollars I paid for this I think it's a steal

Great mount. 3 mounting options: Clamp, existing hole in desk, or drill your own hole. Very sturdy.

This is an excellent monitor mount. It allows you to choose between 3 installation methods. 1) Using the included clamp. 2) Using an existing hole in your desk (such as cable management holes) or 3) Drilling your own small hole which the instructions show you how to do. I chose to use the 2 existing cable management holes that my desk has. I removed the plastic cable management hole inserts that came with my desk and simply bolted the mounts to my desk through the holes. (I purchased 2 separate mounts, one for each monitor.) They are VERY sturdy. One of my monitors is very heavy, and the mount holds it with no problems.

Sturdy and works perfectly fine

When I ordered this, I did not expect the quality of this product to be soo amazing and sturdy for such a low price. The box was heavier than anticipated and the everything came unscathed. I assembled the product and it did not take long to do (if you read the manual that it comes with). I attached it to my desk and it work perfectly! Holds up my Asus monitor just fine to save some space on my desk top and I love that I can swivel and rotate it as needed for whatever I may be doing.

I have my desk back!

It took a bit of thinking, fine tuning, and pactience to get it set up properly, but it was well worth it. It's very easy to use and operates smoothly. I use it at the maximum height with a 32" tv and it works great. I pull it away from the back of the desk to face my bed when I'm laying down and push it back when aim at my desk. This mount allowed me to keep my laptop docked underneath it, which I couldn't do before when the tv was sitting on the desk. It freed up so much desk space. I wasn't expecting the cable management to work that well, but it's amazing! I don't even notice they're there because they're never in the way and don't impede the arm's movements. 10/10 would recommend.

Works great. Holds up my two 23" monitors no problem

Works great. Holds up my two 23" monitors no problem. I really like that it has an option for mounting through a desk grommet hole. Feels sturdy and the monitors haven't tilted or rotated on their own (yet). My only buyers remorse is now im thinking of using 3 screens.

Full Reviews