Features:

  • Our Phanteks RGB LED strips are extremely bright and are currently compatible with the Enthoo Luxe, Mini XL, Evolv ATX TG, and P400/P400S. M/B with 4pin RGB LED header (+12V, G,R,B) is compatible with PHANTEKS PH-LEDKT_COMBO.
  • Phanteks RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit, our LED strip includes double-side 3M tape.
  • The strip is made of flexible PCB material and comes with a silicone housing which is more durable compared to others that uses Epoxy strips.
  • With our 1 orientation connector, you can rest assure that the connectors are in the right position.
  • Input Connector: Strip 4-pin (+12V,G,R,B) connector.
Well done Phanteks! You said goodbye substandard adhesive strips, and hello magnets. Thanks for listening!

All I can say is: Phanteks obviously listens. I recently purchased the Entho Luxe case and was searching the Phanteks website when I saw the 2M LED strip accessory. After researching, watching videos, and reading reviews, I was very hesitant to buying the Phanteks offering. The reviews were almost universal; "The adhesive on the strip is sub-par." Having dabbled in LED here and there, I even considered just buying some LED Strip and doing it myself. Finally, I just said the heck with it and put in my order for the 2M strip from Phanteks. I received it today, and wow, they listened. No more adhesive strip (although some is included in the package). Rare Earth Magnets about every 5 inches are now attached to the strip. I cracked open my already assembled case, and after one trial and a little adjustment I had them installed and it fits and looks great! Well done Phanteks. Easy plug and play installation and it looks awesome.

Great quality LED Strip

Great 1m RGB LED light strip. Works well with MSI mystic, asus aura or if you have a phanteks case like the Enthoo Evolv you can just plug in the provided 12v cable and control the lighting from the front of the case. I personally have tried is with MSI Mystic but prefer the simplicity of using the default phanteks case button. The strip gives you the option of utilizing an adhesive strip (provided) or the magnets that come embedded inside the strip. I love the magnetic aspect since I feel adhesives over time and at some stage you will have an dangling led strip in your case which is not the best look. Overall this is a great led strip. The price ranges from $15-$22 and if you are fortunate to grab it at the low end of the cost spectrum than it is an amazing buy. Even at $22 its still great. The build quality seems to be pretty high but the only thing I have read in other reviews is aggressive bending or twisting can actually snap the rubber of it. I did not experience this myself however I can see how this could happen since the rubber surrounding the led is very thick and has a hard time fitting into certain crevices. Below are just some photos of two colors. I believe in total there are 10 different colors to switch to.

Fit my case perfectly and are quite bright.

I got these to go with my ASUS PRIME Z270-A motherboard and full tower Corsair 750D Airflow case. The package comes with two 400mm (~15.5") LED strips with magnets that stay put and an extension power cord so you can get the LED strips to the part of your case you want them. The LED strips are long enough that one fits perfectly along the bottom of my case and the other fits along the front. The second strip fits the front inner wall of the case perfect. I have a third single LED strip ordered which will run along the top completing the look. The power extension is longer than I need, so I have it folded and tied up. ASUS Aura software configures the strips with a variety of options (sound, temperature, patterns, and colors). The white setting has a bit of a blueish hue to it, but I heard Phantek released a new version with actual white LEDs on it a day or two after I bought these, so if you're after white I'd go with the new version. This kit fit my case perfectly and did exactly what I wanted though, so I'm quite pleased with it. I ordered a single strip for the top to finish out the look.

Incredibly bright

Initial quality is very good - Time will tell how these hold up. I installed this strip in a Phenteks Enthoo Evolv TG case. The magnets hold the strips well enough that i did not use the adhesive backing. I wish the cable lead was a little bit longer, but i was still able to make it work. My biggest comment is that these are incredibly bright, even behind tinted glass like in the Enthoo Evolv TG. Right now i have them in the front, and I think I will move the strip to the back, because the light is just TOO bright. I would buy again, adds some flavor to your case for a reasonable price - and plugging them into the LED leads included in Phanteks cases makes install super easy.

Simple and Inexpensive RGB Solution

The Phanteks PH-LEDKT_COMBO RGB works as advertised, comes with a connector for a four pin RGB mobo header, extension cables for good cable management, and looks sharp. Perfect as a simple and inexpensive RGB solution at this price-point. Definitely worth purchasing again. Two points for improvement: the double-sided tape is both challenging to work with and is not as strong as it should be for hanging the LEDs from the top of the case; the magnetic solution is a great idea but is only strong enough for the bottom and vertical sides of a metal case.

Better than Expected

The price was just right. Typically when LED's are this inexpensive I'm apprehensive on the quality. I couldn't have been more wrong. These look great and are easy to install. Assuming the MOBO has the capability. I have an MSI B250M Arctic Mortar, the onle problem I saw was that I couldn't use the Mystic Light Software. Still figuring that out. I use the MSI Gamer App. Which has many options and works just great for now. The magnets were surprisingly strong, so I didn't need the tape strips that came with the LEDS. (The Pictures do not do it justice) I would Re

I found this item to work really well and my ...

I found this item to work really well and my custom Star Wars build and have had no problems with it. I’m giving it 5 stars because it’s functional and did what was described. I used a I7 7700k and a GTX 1080 both overclocked with EK D5 pump.

The light from this top strip will fill out the case nicely, so it doesn't matter to me how ugly ...

These fit in a Cooler Master Trooper. One along the hard drive cage at the front (vertical) and one sandwiched between the 200mm top fan and the side of the case (horizontal). Note that the top strip has to be pushed in and fit on a trial-and-error basis. It won't lay entirely flat, nor will it run straight (see photo). However, you can't see that unless you're laying on the floor looking up at the top. The light from this top strip will fill out the case nicely, so it doesn't matter to me how ugly the mounting is. The magnets are enough to hold the strips to the inside of this case (I notice some reviewers have issues with the magnets). The adapter will plug into the ASRock X370 TAICHI RGB headers. Note that said adapter is rather tall, so if you have a card in the motherboard's bottom PCI-E slot that has a protruding heatsink like I do, you cannot use the bottom two RGB headers. You must use the one meant for the CPU fan. These strips work perfectly with ASRRGBLED. They don't just do your basic 7 colors (red, orange, yellow, green, blue, purple, pink)--they can also display various hues of these colors unlike some "RGB" LEDs. Setting the color to black in ASRRGBLED turns them off.

Perfect size for S340 case!

Ooooh these are nice! The LEDs have all the colors on each LED, they are not separate R G B LEDs like a lot of these strips. Install was super quick and simple using only the magnets on the strips (they do have adhesive as well). These fit very well in the NZXT S340 case. I ran one strip along the top, and one down the front. The LEDs themself are hidden from view but the light they put off really makes the case. Hooked it up to my ASUS Z270 Prime RGB Header and can control the lights with their AURA sync technology which syncs my MOBO, GFX Card, and these strips together.

Awesome lights, the magnets hold themselves up pretty well

Awesome lights, the magnets hold themselves up pretty well. I didn't need to use the adhesive. Went great with the Phanteks Enthoo Evolv ATX TG.

Full Reviews