Features:

  • 180PCS Nylon Standoffs Hex Spacers/ Screws/ Nuts Assorted Kit.
  • Multifunction: The Assortment Come with Nylon Hex Spacers, Screw, Nut, Stand-off , applies to fpv drone building, pc pcb motherboard, audunio project
  • There are 3 Millimeter bouth size come with beautiful single plastic box.
  • Premium Quality: All products are made of durable nylon, Strong, anticorrosive, compact and portable.
  • What You Get: 180pcs Black M3 Nylon Hex Spacers Screw Nut Assortment, and our 18-month warranty and friendly customer service.
Wow! Works great!

what a great little set of doodads! they work great for mounting an Arduino board on a piece of wood. 3/32 drill bit for the holes in the wood. perfect!

Good Assortment - Excellent Price

180Pcs M3-Hex-Spacers-Screw-Nut-Standoffs for DIY Quadcopter Drone, PC mods, Raspberry Pi board - HOBBYMATE These help make your project neat and professional looking and are also quite useful at keeping the bottom of your circuit board away from a metal enclosure. This pack has a great assortment at an excellent price. I can see purchasing more later.

Works well I would like the threaded part of the standoff to be a ...

Works well I would like the threaded part of the standoff to be a little bit longer I am using vibration isolation grommets to reduce the vibrations that get to my flight controller and there is just enough room to put on the nut as this is almost 3 times thicker than just a single circuit board. However this works well for mounting a standard board.

this came in the mail a week ago. i ...

this came in the mail a week ago. i finally got around to opening it up and taking a look. in general this is a very high quality kit, and i think it cannot be beat for the price. i pulled some of the pieces out and put them in a couple pictures below so you can see what you're getting. i have had some lower quality plastic hardware in the past that broke as soon as you got it tight, but these seem to be built to last.

Good Collection of standoffs

I'm in the middle of a quadcopter DIY project & was not really sure which standoffs I would need. This kit provided me with a pretty good selection of just about everything I needed. It was only thru my less then perfect design that forced me to buy longer standoffs for one of the boards. Maybe next time I'll do a better layout of the electronic components.

Nice Assortment

A good selection of non-metallic spacers, screws, and nuts. I use these spacers to hold a PCB board off of the back of an acrylic ornament. I have installed LEDs and a motion sensor on the ornament and the PCB board covers the wires, an Arduino micro-controller board and other components. The case is convenient for holding the different lengths of spacers.

Custom PCB/MoBo Mounting, Side Panel Spacer, etc.

Great for custom PCB or motherboard mounting. Personally, I bought them to use as a spacer for the tempered glass side panel on my Lian-Li PC-O11x case, because the power cables for my graphics card needed a bit more elbowroom... They are strong enough to withstand the weight of the tempered glass panel without breaking, though I probably wouldn't trust them in an earthquake....The second smallest standoff gave me the perfect clearance to install an EVGA PowerLink adapter on my EVGA 1080ti FTW3, for a cleaner build.

Great for plastic standoffs. But I will get round metal standoffs next time.

The Hex size of all standoffs is 5.5mm All male thread Lengths are 6mm Female thread depth is at least 6mm on all !Except the 6mm height standoff, i think it is 4mm deep Heights(mm): 6, 8, 10, 12, 15, 20 Great for plastic standoff. But I regret not getting thinner(round) metal versions. The hex shape is hitting parts of my electric board that a round metal standoff would not. I've broken 1 of these off inside a metal female hole from over tightening it. I've had to cut the male threading down for my uses. pretty easy with wire cutters.

This a great kit fo have for the hobbyist

I have a lot of loose Raspberry Pi and Raspberry Pi Zero boards. I decided to put them into cases, but didn't feel like buying cases for each of them. So I got some acrylic from the local hardware store and laser cut the patterns out on the sheets of acrylic. These nylon screws are perfect for holding the boards and acrylic together. They also add a nice black accent to the finished design.

Nylon Hardware That Is Great For RPi Builds

Assorted stand offs and screws that are very useful for elevating your RPi off of a flat surface to promote better air flow and heat dissipation. I specifically bought these to raise the board off of the back panel of my Picade cabinet so that I could install heat sinks on the board. I am very happy with the result.

Full Reviews