Features:

  • (NOT Fit Blue Yeti Mic)WIDE APPLICATIONS - Our microphone pop filter suitable for 45 mm to 63 mm diameter microphones such as AT2020, AT2035, AT4040, AT2050, AT2020+, Samson Meteor , Scarlett CM25 ,CAD GXL2400, Apogee, Razer Siren X, BADAAX Mic, Rode NT1A, Rode NT-USB, MXL 770, MXL 910, MXL 2010, CAD U37, BM-800 and many other microphones.
  • THREE LAYERS FILTER MIC SHIELD - Three layers design include foam layer, metal net layer and basic etamine layer can effectively reduces the plosive, pops, crackles, wind interference, breath sounds when recording vocals. Absolutely necessary for recording, speaking or singing. This studio mic shield isolation helps to get your best vocal recording.
  • MAINTAIN CLEAN - Metal mesh matches plastic frame in a special appearance design. Functionally prevents saliva, keeping cleanness for your microphones and protecting your microphone.
  • EASY TO SET UP - Handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones.
  • PACKAGE & GUARANTEE - 1 X Pop Filter(microphone is NOT included). We provide 100% Satisfaction Guarantee. If you have any problem after receive this item, please don't hesitate to contact us, we will try our best to resolve all issues.
Works on Neumann TLM 103

It fits on my TLM 103 and does the job. Avoids Pop and does not add any ringing vibration to the recorded sound. Keeps the desk cleaner and does not block the view of the reading material on the computer screen when doing voiceover.

Works very well. I am pleased.

Got it for my sterling audio and in my opinion (because everyone has opinions about pop filters and which ones are the best), I think it works great. Far superior to the pancake on a snake. Nice and compact. I put it on my Sterling Audio and it stays exactly where I want it. I tested it with and without and then I tested it against a few other styles/brands of pop filters I’ve accumulated and this is honestly the best I’ve used. So for reference, I’m using a Sterling Audio ST159, DBX 286s, and the Audient iD22 with Focusrite HP60 MkII headphones(super underrated headphones btw).

It works better than the other I've tried.

I don't like the flat round filters as they get in my line of site for script or monitor. This is an effective low profile filter that fits my microphone perfectly. Yes, my voice studio is in the closet. One day... I'll have a proper studio.

Way better than the simple round mesh pop filters [AT2035]

After just one simple and short test recording with this filter, I immediately could tell it was a better solution than my old round mesh pop filter that I see a lot. Not only does this one have a lower profile because it hugs the mic, and doesnt have the long snake arm that has to clamp to something. The different layers are clearly doing a much better job than one made of only mesh. You can blow directly into the filter at the mic, and you wouldnt even be able to tell that's what was happening if you were to just listen to the audio. It reduces plosives very well too. Build quality seems sturdy and its very easy to stick onto the mic. Granted mine is an AT2035, slightly wider, I believe, than the ever popular AT2025.

Works good. Big Mic users beware

Really good, I use it as a rear shield to block incoming fan noise from my pc and it stops almost all of it. A warning to users of the Blue Yeti and other bulky mics: It doesn't hold well, only the bottom band works for me. Still gets the job done though!

Decent for the price.

Cuts my "T" and "B" and "P" popping down to almost nothing. Sibilants are also well-controlled with this. A bit difficult to put on the mic without the rubber band wanting to pop off and absolutely NO meaningful instructions on how to do so, but all in, a pretty good pop filter for a Youtuber on a budget.

Very good for the price and Will Fit a MXL 990 with effort

I bought this as a simple solution for a pop filter for my MXL 990. I was concerned at first because it looked like the fit would be too tight for the mic with the included bands. I tried it multiple times before I looked at the different notches for the rubber band. With some effort and luck I got a nice snug fit on the mic w/ the factory shock mount. I wont tell you its an easy task. Its not and you may end up breaking the filter in the process but. Even though its not listed as comparable it will work. As for the quality, it didn't fail me while abusing it. It sounds just fine and for the price its hard to beat especially considering you don't have to have a big round piece of nylon or metal in your face.

WILL FIT BLUE YETI EASILY

Works wonderfully despite the fact that it's not suppose to fit the Blue Yeti Pro. If you look at my pictures, you'll see that it comes with three bands that you can use to make it fit. Took no more than a two minutes to get it on the mic. It'll look a bit weird due to the mic size but it will work and fit so kudos!

Very satisfied.

Fits my mic (CAD U37) well. Uses two silicone rubberbands to attach to the mic (came with one extra); it looks like you could swap out for longer bands to accommodate a slightly larger diameter mic. Rigid plastic frame with a nice metal screen surface (pliable but dent-resistant to a degree) covered in a very fine mesh and lined with foam for dampening.

Fits my AT2020 perfectly and eliminated a bunch of noise.

Arrived well packaged and fits my mic perfectly. I like that it has a screen and also foam covering on the inside. I think both combine to make a really effective filter. I'd love to buy a case for this so will need to look for one. For now I'm just using the box. Nice that extra bands are included, but if somehow they broke, you could just use a rubber band. Great value for money product!

Full Reviews