Features:

  • New Slim Style Design License Plate Frame. Will Not Block State Tags.
  • High Quality Rust Free Stainless Steel License Plate Frame: Protects Against Corrosion And Rust
  • Easy Installation And Comes With 4 Screw Caps, 4 Self-tapping Screws, 4 Machine Screws, 4 Washers, 1 Screwdriver
  • For U.S. License Plate: License Plate Frame Size 6-5/16" x 12-1/4"
  • Stylish Construction With Chrome Finishing
A Very Good Buy.

These frames are a good value. They are light gauge stainless steel, but certainly not flimsy. After all they are a cosmetic trim item, not structural, and are robust compared to most of the factory trim on your car. Several people have mentioned issues with the fasteners, me too, but based on the price it's not a big enough deal to downrate the item. You get four screws with separate push-on shiny covers. That's enough to mount both frames because the frame mounts to the plate at one edge with stamped hooks and uses screws only at the other side. But, it's not enough to remount both the frames and plates with four matching screws each. I didn't like the screws and covers provided with the frames or the zinc-plated hex-head screws that the dealer had used anyway, so, I went to the local hardware store and picked up eight SS security screws and washers. That cost somewhat more than the frames themselves, but looks much better and is more secure. A cheaper alternative would be to use the four supplied at one end and four others at the opposite. The frames look great, plain, simple, and very shiny. The pattern on the frames in the pictures is the reflection of the grass on which the car is parked, very shiny!

Looks Really Nice On My Car

You get two thin light gauge Stainless Steel License Plate Frames with two tabs on the bottom which hold the plates up and in place. I have a Hyundai Sonata and the screws that came with the kit where not long enough to fasten on the rear of my car and the existing screws on my Sonata had lock washers that could not be removed because of how they were manufactured, I could not put the caps on them because of the washers being in the way. I went to the hardware store and bought a few number 12-24 X 1 inch long stainless steel machine screw and I was able to mount the plates in the rear of my car. The front of my Sonata has a plastic block that is used to mount the front license plate and I was able to use the screws from the kit to mount the plate to my car. Once mounted my license plates look really nice on my car.

Easy to attach and perfect for decorating

I bought this for my new car because I did not want to drive around advertising the dealer; if the dealer wanted me to advertise for him he would compensate me for doing so. I was looking for license plate holders that held the plate on the car, were thin and did not cover the info on the license plate. I also wanted plain, sturdy frames that I could decorate with gems, glitter and painted designs. These plate holders did all that. Plus, the instructions were easy to follow and the included tools allowed for quick attachment. What more could a girl want?

Good product, even better customer service

UPDATE : Dad bought a new car and I wanted to get him a shiny chrome plate holder and ditch the dealer plates. I looked no further than this product. Quality of the product JUST the same as when I first bought it, and provides a NICE contrast to a dark colored vehicle. ------------------------------------ I got a ticket for not displaying a front license plate. So I bought this, which contains 2 frames, even though I just needed 1 frame. When I received the product, I was very satisfied with the finish and aesthetics. Very clean chrome finish. But it was missing 1 metal screw cap cover. But since I intended to only install 1 frame, it was a problem that I could overlook, really. I later received an email from the seller asking if everything was to satisfaction, and I thought I would bring up this issue. I understood it would cost more in shipping just to deliver that small part, but to my surprise, they did just that. They went ahead and shipped me the part to make me whole. I was very satsified with the product, but I am even more moved by the customer service. Thank you.

Sunplus Trade has been one of the best I've seen for customer relations in my years of ...

Sunplus Trade has been one of the best I've seen for customer relations in my years of Amazon buying, so a follow-up on the product itself as requested. Not much to say beyond a well-made product at a very reasonable price (Prime, included); additionally two (2) are included, so you are receiving double value. Installation was idiot-simple (that's me), Sunplus followed-up with an unexpected e-mailed set of instructions just before delivery that weren't necessary even for me, but helpful. Item itself fits well (generic fit), looks nice and normal - if it does pit/rust over a couple of years - the chronic problem of all these types of license plate holders - I have a replacement in stock. All in all, a totally satisfactory purchase, and super-easy way to find a rather particular license plate holder (two holes, rather than than the four-holers usually available in WalMarts or even the local auto stores). And cheaper, with Prime. Recommended.

Top-notch

True to the description! It's a really clean and slick stainless steel frame polished to a shiny chrome. The caps that cover the screws are plastic, but perfectly match the frame and finish it off nicely. On the bottom of the backside, the metal extends upward a bit so that the bottom of the license plate can slip down snug inside it which is nice. Thumbs up! If I were getting really nitpicky, the screw caps are a little large for my taste, but overall, I'm very pleased. It frames the license plate perfectly with out covering the state name or registration stickers. Attached is a pic of the frame on my front plate.

Attractive, inexpensive, good quality!

These license plate holders are simple, sleek and attractive, with 2 sets of mounting screws for different mounting methods plus a nice Phillips screwdriver included. The screw covers are the topper that makes the overall look very classy. I needed a plate holder for my front plate in particular because it was being bent in half by the automated carwash brushes. It solved that problem and improved my vehicle's appearance nicely in the process. The price is very reasonable for the stainless steel holder, and delivery was fast. I'm very satisfied, thank you Toni for offering these!

SunplusTrade License Plates are the best.

SunplusTrade is by far the best Stainless Steel Plate I have bought. Quality product at a amazing price. NOTE: I had a screw cap fall off and contacted SunplusTrade, and wanted to buy just the caps. (Who knows why it fell off... probably the car wash) Customer Service was Excellent and contacted me right away. They made me a very happy customer. I would recommend this family owned COMPANY for their products and customer service.

New Frames!

Just installed these new frames today and they look really clean. I'm not sure how sturdy they are just yet but so far so good.

Sturdy & Easy to Assemble

This is a good license plate holder for the price. It is aesthetically pleasing and matches the silver on my car. I have never been one for crazy/gawdy decorations and stickers on cars, and this holder is classy and nice! It's easy to assemble - if you have someone to help you hold it in place/line it up with the holes LOL.

Full Reviews