Features:

  • 【High Quality Material and Reliable Performance】this CE and RoHs approved double dome light has a life expectancy of more than 60,000 hours, lasts longer than standard bulb. It is also heat-resistant and anti-corrosive.
  • 【Easy Installation】 It has 2 two wires without polarity and comes with nuts and screws to hold it in place directly, suitable for smooth surface mounting.
  • 【Convenient ON/OFF Switches Design】 built-in 3-way switch that enables you to use one side or both sides of the light independently; it adds great functionality to any area for lighting and it is widely used as perfect replacement light for Car/RV/Trailer/Camper/Motorhomes/Marine Boats.
  • 【Lower Power Consumption & High Energy Efficiency】 It comes with two T10 Wedge panels with altogether 48 pcs 5050SMD LED Bulbs. It only draws 6 Watts and provides total 2 X 300 lumens of brightness.
  • 【One Year Warranty GUARANTEE】 We take full responsibility for our product and customer dissatisfaction. if there is any quality problem of our light or you are not happy with your purchase in our store, please kindly contact us and we are always ready to help.
Sovled My Problem

I have had a problem with the incadescent lights in my RV getting very hot. I tried switching the bulbs with LED plug in bulbs but they were not bright enough and didn't last very long. When I saw these lights and read the reviews I decided to try one. I installed it over my sink under the cabinet. The old fixture would get very hot and anything in the cabinet would heat up also. The Kohree light was very bright, I love the dual switch and it does not heat up at all. I bought 6 more to replace all the fixtures in my RV. I took a before and after picture to show the different lighting effect and will post the pictures as soon as I am finished with the installation.

Great lights

After reviewing many different lights off of Amazon and other websites and if you dealers especially Camping World I ordered one of these to see how it was and it's just an absolutely great light after the first light I ordered I came back to Amazon and ordered lights for my whole trailer I've completely redone all of them these lights are beautiful they fit perfectly I'm completely happy with my purchase and I would highly recommend these lights to anyone needing to update or upgrade your Lighting in your camper or RV or any small area where 12 volt is available these lights are bright they're great the units they're made with do not go bad after a couple weeks I bought a set of value lights and it was a horrible experience they started flickering flashing and going dead within just a few days never again Corey makes great lights and I love these

VERY BRIGHT! Being a full-time RVer, lighting is ...

VERY BRIGHT! Being a full-time RVer, lighting is a bit of a deal. After all, I don't go "home" after a week or two- this is home. I bought these to replace incandescent overhead lights. Lots of distributors claim the lights are bright, but they fail to live up to their description. These are exactly what we needed. I only bought 2 to try them. Though I am going to have to get used to the difference between incandescent vs LED, I will be replacing the rest of the ceiling lights in my little version of home.

We should have done this ages ago!

Very bright, clean light! we have some of the old fixtures on the same switch in the same room and we were shocked at what poor light we were getting along with in our RV. After installing 4 of these, (the hardest part is trying to get the old fixture cover off so you can access the screws!) we have ordered 4 more. It is true that no instructions come with the lights, but it is so simple, you don't need instructions. You just connect either one of the two white wires to either one of the two wires, in our case red and black, coming out of the ceiling, and then screw the fixture back into the ceiling. It took us less than a half hour to change four fixtures. An electric screwdriver is nice to have but not a necessity. We should have changed lights a long time ago!

Really bright but you can 1 or 2 lights at a time.

I had one of my many 12 LED lights blow out in my trailer. For the size of the trailer, they always seemed too dim and they made up for it by putting a dozen through the main area. I decided to get this 2 pack and replace a good single light in the bathroom with a new dual light. I then took the original single good light and replaced a bad one. Wow, what a difference! It is so much brighter in the bathroom with both on and really lights up the shower. And when so much light is not needed, I like how you can just turn on one side of the light. Old single light was 400 lumens. The new one with both lights on is over 600 lumens. I replaced that bad light with the single good light. I then swapped out a single good light with the other dual light from the 2 pack. Again, what a difference. So much of a difference that I'm going to swap out all of my single lights with these new dual lights. It is going to make so much difference and again, I think it's great that you can just turn on one side if you don't need that much light. Installation was simple but I found odd that it has 8 screw holes but only came with 4 screws. I ended up reusing some of the old screws. Ample wire leads with the new light, so there is no issue there trying to wire them in unless the existing wiring (like how mine is) is short and difficult to get at. Installation for each light was less than 5 minutes. Only had about a week, so I cannot speak for the longevity of the product. If they blow out prematurely, I will certainly update my review accordingly.

These lights are great. Would have given it 5 stars if they ...

These lights are great. Would have given it 5 stars if they included enough mounting screws and a wiring diagram. They have built in 3 way switches and can light one side or both sides of the fixture. Wiring is a breeze but it doesn’t come with wiring instructions. So If your RV has black & white wiring in it, hook the red wire on the lite to black on your rig and the black from the lite to the white on your rig. The LED’s are sensitive. I dropped one while installing them and one half of the led cluster broke & doesn’t work. So don’t drop them!!! Highly recommend these lights!!

Great bargain

The light output on these Led is awesome. We replaced two of the lights in our RV & the difference it made was exceptional. We especially like that only one side can be used. We will be ordering some more to finish replacing the rest.

Great, energy-saving lights.

Couldn't be happier. Simple to install, reasonably priced and--best of all--they work great. At a minimum, you will need Philips (and perhaps flat blade and square drive) screwdriver, side cutters, and wire strippers. Mounting screws and wire nuts are included but I found them way too small for my application. A quick trip to the hardware got me #12 screws and medium and large, yellow wire nuts. I also used an electric drill to bore out the mounting holes in the new light bases to accommodate the larger mounting screws and to remove the old screws from the old fixtures and to drive the screws for the new lights. I also used black, plastic tape to wrap the wires and wire nuts before stuffing them back in the mounting holes. Used scissors to cut the tape. I would estimate about 10 minutes or less to remove any old light and mount the new one if you are prepared with whatever you might need. Remove the old light fixture, clip the negative and positive leads, and strip about 3/8 inch or so of the wire. Be careful not to touch the leads together if you didn't remove the coach batteries or flip the breaker to off. I left mine all connected and was simply careful. Remove the new light from the box then remove the lens by squeezing the side nearest the switch. Remove the protective wrap from the lens. I drilled out the mounting holes next. The new light has two non-polarized wires which make connection simple. Twist all the appropriate wires together and screw on the wire nuts. I wrapped the wires with black plastic tape at this stage. Check to make sure the new light works properly. Stuff the wire nut portion of the wires back in the hole. Make sure you won't puncture a wire and screw the new base back in position. I found that enough of the old holes lined up to make the installation neat. Put the lens cover on, outside edge first, then pinch and mount the portion of the lens next to the switch. I also used the single LED Kohree lights to replace the old reading lights in the bunks and such. Enjoy!

THEY ARE BRIGHT and soooooo easy to install

Wow! Amazingly bright! Last summer we changed out ONLY the bulbs in our original RV fixtures. They were not bright, and as we traveled the bulbs became loose within the fixtures so they appeared to be burned out. I got tired of reinstalling the bulbs at every destination. So... I ordered 4 packs of these fixtures and I'm about to order more. THEY ARE BRIGHT and soooooo easy to install.

They are very bright but make everything that's white have ...

They are very bright but make everything that's white have a tint of yellow with yellow lines. Need different lenses. Update....After writing this the company actually contacted me and apologized right away for my dissatisfaction. They sent out 12 new lense covers which fixed the problem and looked much better. These are great lights for the money and excellent customer service!!

Full Reviews