• Air conditioning valve core Car R12 R134a air-conditioning accessories
  • Bear the impact,Bear the oil, Watertightness,Bear the corrosion
  • It applies to the replacement refrigerant valve core leak
  • Most models Universal

This is a really nice handy kit to have and so far has had everything that I have needed and the fittings have all worked with no issues.

I found the correct size valves for the high and low side for 2003-2007 honda accord 3.0l v6 model. Not sure if the size are the same with 4 cylinder models.

Worked in my 06 honda odyssey. We replaced the ac condenser (also from amazon) in our odyssey re-filled the r134a and immediately both high and low ports schrader valves started leaking. Bought this kit and it worked out very well. Had the exact same size I needed.

This kit contains the Schrader valve cores needed for most automotive AC systems, at a price well below what a local shop would charge me for just the two that I needed. The kit included the tool needed to remove and install the valve cores. It would have been nice to include the identification label as shown in one of the photos, but in the end I had to match the ones removed. The tool will slightly bow the plastic box top and allow the valves to migrate from one section of the box to another.

A month ago, I replaced my high and low pressure service valves with 2 valve cores from this set. The valves are holding up fine so far. The wider notch in the tool spread out a little bit, but my high pressure valve core was extremely tight - pliars on the tool handle tight. I will be looking for a better tool, but in the mean time, the tool with this set did get the job done.

I had a very slow High Pressure side leak. Used this kit to replace both valves. My cars are over 15 years old. So if the AC system is ever de-pressurized, save yourself some future grief and replace BOTH valves. The o-rings in the valve harden and leak with age.

I use this set when I have a leaking valve for r134a car a/c they use to sell a smaller parts kit at autozone years ago now you have to buy this or remove each valve and buy them one by one any way. so far the valves in this kit have been good and worked just fine even on a Nissan frontier with really hi pressure

Used it for my 99’ Silverado low side port, It was leaking, I replaced the core and have plenty of spares. Next time I work on an A/C system I will replace both valve cores right away before filling system to avoid discharging refrigerant and wasting money.

The valves always leak on older cars. The parts house do not carry these or can figure out which one you need. I you're changing AC on a car replace the low and high ports.

I bought this at the recommendation of K Flo's Tacoma channel and it worked perfectly to replace the valves in my Tacoma and 4Runner.