Features:

  • 50 Days Guarantee!
  • Part Number: 300-1406, SP-1636669, SP-163669
  • Always in stock and ships same day!
  • RV, Coach, Motorhome, Toyhauler, Step Motor for Stromberg Carlson, Lippert LCI, & Frigette entry steps.
  • BEFORE ORDERING PLEASE MAKE SURE THAT THIS IS CORRECT MOTOR.
Five Stars

Replaced the step motor in my 2006 Newmar Kountry Star DP perfectly.

Good quality motor.

Exact replacement. Arrived quickly and well packaged. It was a pretty easy install and the motor works perfectly. Nice to have my steps working again! Would be nice to have an installation guide with it but as I said, it's an easy install. If the motor fails, I'll do an update but so far so good.

Works on Kwikee also..

Used this Motor to replace my Kwikee ?33 Electric step motor. They looked identical and work just fine. The only thing was the gear adapter was rather tight but I was able to carefully tap mine on.

Don’t loose the 6 spacers

Pretty straight forward replacement. Remove 3 bolts and 2 wire clamps, grease and reinstall new motor

Item worked as stated.

Installation was not too much of a problem.

The Best price of anyone around

The Best price of anyone around. Quick shipping. The motor went in without any problems and works great. Install was easy! Step works perfectly. Fast shipping. Perfect fit for my motorhome. I am very happy with the purchase and would recommend this product!

Easy installation

The step motor is an exact replacement for the original part. The three mounting holes in the motor matched the holes in the base plate of the step exactly. No adjustments were necessary to make the steps operate properly. I am completely satisfied with the installation and the operation of the steps.

A lot better than the previous one.

I have replaced this thing twice now and the original and then the replacement were crap. I ordered this one and it sounds completely different. Very smooth. Don't know how it will hold out but it seems to be much better quality.

A perfect for my Coach Step "29 Dual Step

This motor is identical to my original failed motor. My old part has the part # of 163669 vs this motor's # 1636669 (Extra 6). Despite the difference in part numbers they are the same. There were two small, easily resolved, problems during installation to watch out for: 1. There is a small screw on flat side of the motor (aluminum plate) near the gear. On my step this screw rubbed against the bottom side of the larger half moon step gear. This screw can easily be removed and the mounting bolts will hold the plate in place without it. Check for this problem on your step. I had to disassemble the install to remove this screw and then reassemble. 2. The electrical cord is routed out the back end of the motor (Away from the gear side) and held in place with electrical tape. I did not pay attention to this, but in my case this route interfered with the alignment of the motor to the half moon gear of the step. The cable was pinched below the motor causing it to not sit flat to the mount. Just remove the electrical tape and reroute the wire. Fortunately I had taken pictures of the old installation and confirmed the correct wire route for my step. Check for this problem on your step before assembly. The motor performs well and I am very happy with it. I cannot tell any difference from the old motor (when it was working of course!)

Great service got here a day early

Great service got here a day early. Thank you for the quick delivery. Installed the motor in about 15 minutes and it worked great. Highly recommended! A+++++++++

Full Reviews