Features:

  • US Design Patented
  • Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when cover is lying flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.
  • Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.
  • Easy no drilling installation with instruction and mounting hardware provided. | NOTE: Small holes will need to be cut in the bedliner for vehicles equipped with over-the-bedrail bedliner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bedliner without modification.
  • LIMITED LIFETIME ! | IMPORTANT: Please measure your truck bed size before ordering. We accept returns; however customer will assume the return shipping cost if ordered wrong.
Fantastic

This bed cover was everything they said it was and very easy to install. I was very skeptical because of the great price but I am pleasantly surprised, fantastic fits and looks great. Thanks

Amazing Quality, Fit, and Function at an Awesome Price... buy it.

I put this on my 2017 GMC Sierra All Terrain CC SB. Excellent quality, great packaging, and it even comes with a nice carrying case if you ever remove it from the truck. I've had other brand tonneau covers in the past that were $300-$500 and this one is on par with those in every way. I will never again waste extra money when I could spend nearly half and get the quality of a Tyger Auto cover. Don't forget about the stick on bed seal for the front portion of the bed, this makes it watertight. The seal is in the bottom of the tonneau carry case, and I almost didn't realize it was there! My one recommendation/complaint is the bright blue lettering on the logo badge on the back, this isn't very appealing to me so I painted it black... but it would be nice if it was a dark grey or black to make it blend in more.

Can't beat the price!

For the price, I don't see how you could go wrong. The instructions were really unnecessary as installation is really intuitive. Put the bulkhead piece on, slide the sides in and tighten 2 Phillip screws. Then line everything up and clamp it down using a 10mm ratchet. It's really that simple! Took about 15 min to do by myself. It looks really clean and I am really amazed at the quality for this price point. Sure, there's room for improvement as far as a few material choices go, but it was $189! It rolls up out of the way very easily to allow full use of the bed.

Highly recommended!

Product was packaged with a lot of protection. It was very easy to install. The built in cross bars make it very easy to roll up and store. The top is nice and tight when it's on. Living in the northeast, this cover has been through heavy snow and rain, with no leaks. I highly recommend this cover to anyone with a truck. It looks great and keeps my truck bed safe and clean.

Great Bed Cover!

This bed cover is perfect for my truck! I own a 2016 Chevy Silverado Regular cab long bed and it holds up perfectly fine. I am constantly transporting things from one place to another and it's been great through it all. I love how easy it is to just roll it back up to the window and strap it down when I don't need to use it. I had an issue with the back coming undone so I contacted the company and they helped me fix it promptly. I will be buying from them again in the future if I ever need to.

Fit GMC Sierra Z71 4x4 bed perfectly. Great purchase.

This bed cover was exactly what we needed for a recent trip to the beach. It was easy to install (less than 30 minutes, even after adjusting the rails a bit to get a tight seal near the cab) for two moderately handy people. Even though the truck has a factory bed liner, it wasn't necessary to cut any wholes or modify anything on the bed to get a snug fit. There are two screws that hold the frame together near the cab (one on each side) and three clamps on each side to hold the rails to the sides of the bed. The side rails must be positioned evenly to get a good, tight connection on the slots near the tailgate, but this can be easily done with a tape measure by positioning the front rail to get a good seal at the top of the bed near the cab and measuring the distance from the tailgate to be sure the rails are even. Once this is done, the cover snaps evenly in place, forming a good seal on the tailgate end. As others have said, if the tailgate locks, it is not possible to access the contents of the bed without cutting the cover. We drove through high wind and torrential rail on the trip, but the contents in the bed stayed dry, so the cover performed perfectly. The cover did move some in the high wind, but no impact on the function or integrity. The gas mileage also seemed a little higher on the trip. When we returned, we drove through the carwash with the cover in place and the bed stayed dry with no impact to the cover. Overall, we are very pleased with the look, the performance and the ease of installation. Highly recommend for someone looking for a solid bed cover at a reasonable price.

AWESOME

WOW! Awesome, bed cover. We took a trip to Texas recently and we encountered 100 MPH Wind shots, this bad boy stayed secured and kept all of our luggage dry. We actually were in Colorado when 4 Semi Trucks tured over because of the wind!! Well worth the money and them some:)

This cover is awesome! I was a little scared upon opening the ...

This cover is awesome! I was a little scared upon opening the box as I didn’t see the instructions at first. The cover itself comes in a large bag and the directions were in there. Phew. Anyway, installation was a breeze! All you need is a Phillips screwdriver and a 10mm socket. Had it on in 35 minutes. It looks great and seems very functional. No rattling or wind noise from what I can tell. Installed on a 2017 Silverado LT with the 5.8 bed. Awesome purchase for the money!!! Saved over $250 by not having it done professionally!

A lot sleeker than I thought!

So far it looks and feels great, super easy and simple installation! We’ll see how it does in a few months and I'll update with more pictures. Update (05/12/20): Honestly best money spent, no issues at for almost 2 years old in the constant sun. No discoloring or stretch/tears. Has done me good for quite some time now. Update (09/24/18): Still outstanding for the past 2 months! No discoloring or any type of tears. I make sure the clean it with a Tonneau cover cleaner to keep the shine!

Nice cover, great price

Such a nice cover at a great price. Install takes approximately 30 minutes for one person. Probably 20 for two. The rails seat nicely from bulkhead to tailgate and secure easily to the bedrails with clamps. We have an under the rail bed liner and there was zero interference with install. The velcro is nice and strong and can be easily secured when you have the cover closed. There are support bars in the underside so it stays nice and taught and prevents a sagging look while closed. When the cover is rolled out it snaps into place at the tailgate, when it’s rolled up there is a clip that holds it in place nicely. Overall no complaints, a great product! Installed on a 2005 Chevrolet Silverado 1500HD

Full Reviews