Features:

  • PERFECT FOR HOME SECURITY SYSTEMS - Z-Wave Plus Certified and compatible with Z-Wave Hubs, to seamlessly integrate with Wink, SmartThings, Home Seer, Nexia, and other hubs
  • SENSES MOTION AND AMBIENT LIGHT - Senses current lighting conditions and helps create smart lighting scenes that optimize your personal safety and home security
  • 110-DEGREE MOTION DETECTION FOR ALARM - Detects movement with extra-wide 110-degree coverage and responds by sending an alert to your smart home alarm system
  • BATTERY-POWERED TO INSTALL ALMOST ANYWHERE - Magnetic mount and battery operation (3-year battery life) for flexible installation in nearly any area of your home
  • ADJUSTABLE SENSITIVITY - Don't send your neighbors into a panic every time Rover and Spot enter a room
nice solid performance but expensive

Easy install to my Wink2 Hub ( make sure you are within few feet from the hub). I can confirm that adjustments to sensitivity and status light on/off function available from wink2 hub app. Response time in less than 1 second, will update in a few weeks if any issues. 3 weeks update: I can confirm that this sensor works as expected and solid with zero interruptions, as some one mentioned before if you are away for more than 2 days it will alarm you that it’s disconnected but in reality it’s not and all you have to do just walk by thisbsensor and it will reconnect again to wink with no intervention needed. - muc better product than sylvania motion sensor that kept disconnecting every 3-8 days.

Excellent. Probably the best sensor out there for wink (and you can use it outdoors if protected from the elements).

Absolutely great. For reference I have tried the GE portable sensor, the aeotec multi sensor 6 and the eco link sensor. This blows them away and is much nicer looking (you don't notice it) than the others. I am using with Wink and it works wonderfully.

Great addition to my smart home!

Very happy with this motion sensor. It is very small...about the size of a golf ball. The ball itself is magnetic, so we have stuck it to a metal item right outside our patio door (under cover - so not sure if it is weatherproof). I am using it with SmartThings and it turns on all the lights on the patio when it senses motion, during certain hours of the day. It does have a light sensor too, but I didn't feel like messing with figuring out the right light level. It also comes with a small metal base that you can put on the wall if you don't have an existing metal structure. The ball can be aimed in multiple positions too. Great addition to my smart home!

Own Two So Far, and Will Be Buying More

Totally pleased with these. I've got two so far and will be adding more. Paired with a gen-5 Aeotec Z-Stick running on an instance of OpenHAB. Reporting is nearly instantaneous, field of view seems great (they'll take some fiddling to position optimally), and battery life so far is still reporting at 100% after a week or so of use. Inclusion/exclusion are pretty seamless, though note that--if like me--you're using a Z-Stick on OpenHAB, you'll need to wake the device several times after inclusion, once your Z-Stick is plugged back into your server. To do this: * Discover the Thing through your Z-Wave binding; it'll first show as an unknown device. * Push the button three times, quickly, and do this several times in a row After a few tries, your Thing will populate from the database (once the manufacturer information is read), and you'll be good to go.

instant on motion

I use this with veralite. I tried out a few other motion sensor lights, this was the only one that fit my needs. It turns on lights instantly when motion is detected, no delay. The mounting bracket and circular design allow you to angle it in almost any way you'd like. As I add in more automation to my home I'll probably pick up a couple more of these :)

This motion sensor knows movement.

Man, this motion sensor is awesome. I'm a little worried about battery life, so that may change things. But as far as speed this thing is fast. I am using it in Home Assistant via Smartthings. Smartthings recognizes as a door sensor which is probably why it is so fast. It is either open if there is motion or closed if there isn't. Most true motion sensors have a delay before they register motion, and have a cool down of 4-5 mins before resetting yo no motion. Not this guy. It picks up motion fast and as soon as it stops it goes back to clear. Perfect for my automation needs as I want to know as soon as there is motion in the garage. When I need more motion sensors I'm getting this guy.

Works with Nexia Bridge; very accurate, and I love getting the notices on my phone.

Installed easily with Z-wave Nexia Brdige. Now I get a notification on my phone every time someone comes up to my front porch. Also, I have the front porch lights turn on for 10 minutes any time motion is detected on the porch. We set it on the low sensitivity and it's very accurate. Awesome!

My Go To Motion Sensor for SmartThings

I use these motion sensors with Samsung SmartThings. I have a couple of Fibrao ones, which give the temperature, but they are always losing the connection. I actually replaced one Fibrao with this motion sensor and a multipurpose sensor for the temperature. Yes, two devices but it works much better. When you install this motion sensor there is a generic device handler. You can search on GitHub for a device handler by K LaFramboise and install it using the SmartThings Groovy IDE website. This custom device hander gives you more options and more control.

Versatile Motion Sensor

If you have a Z-wave Compatible Hub, the Dome Motion Sensor is a great addition. You can adjust motion detection sensitivity, has a good range, and the magnetic mounts make it easy to mount around the house especially as most houses these days have metal reinforcement for rounded edges of the dry wall. The sensor detects motion starting and stopping very quickly, which allows you to be able to control other elements around your smart home very quickly. Due to the Mesh networking capabilities with other Z-wave products, I get very good range and coverage as compared some Zigbee motion sensor products I've tried. The setup and install onto my network was quick and easy, just need to make sure you follow the instructions with the included manual. Uses a CR123A battery and should last ~5 years. Love the sensors and will probably pickup another one.

Works very well with Wink 2

I've installed 7 of these motion sensors to replace some very old motion detectors that were not very reliable and ate batteries like crazy. So far these Dome motion detectors have been excellent. Easy to setup with Wink and so far have been very reliable. Really like the small size and magnetic mount. I plan on ordering a few more. EDIT: (12/09/18) I now have 12 of these motion detectors and all are working well with my Wink 2 hub. Will be ordering another one today. EDIT: (01/18/19) Thirteen and all still working great. Haven't had any fail so far and haven't had to change any batteries which is something I had to do often with my old motion sensors every month or two.

Full Reviews