Features:

  • Screen Size: 11.6"
  • Connector: 30 Pins
  • Screen Finish: Matte
  • Maximum Resolution: 1366*768
  • 1 Year Warranty
Perfect

Although I can say I have installed one replacement screen before, this was a breeze. Product described exactly as stated, and works great. Took about 5 minutes to install. Need a glasses screw driver kit, and opening the case works with a drivers license or stiff plastic.

Still works almost been a year since I got it

Works perfectly got it in June it’s September now so will see how long it lasts...it’s been almost a whole year since I got the screen replacement I did it myself and still works perfectly fine....**just wanted to update this review it’s almost been a year since I got the screen replacement and it’s still works perfectly

Works great for Samsung Chromebook XE501C13-K01US

I purchased from seller Techorbits and they shipped promptly and safely packed. This fit my new, but damaged, Samsung Chromebook perfectly. Easy to swap out in 10-15 minutes. First, gently pull off the front of your screen bezel using only your fingertips on the interior frame. It's snapped in place so digging under the plastic bezel cover will gradually unsnap loose. (Make sure the Chromebook is turned off during this entire process). Then unscrew the four corner micro screws. Gently lay the old screen facedown on the keyboard with the cable still attached. Using a magnifying glass, look at the cable connector and you'll see a tiny wire bar laying across the top of the cable connection. Using your finger tip, simply pry up the wire bar and gently flip the bar all the way back. Then gently pull out the connector clip to unhook the connection. Remove entire broken screen and discard. Replace with new screen in reverse order. Be gentle when reconnecting the connector clip and make sure it is fully seated back into the holder before flipping the wire locking bar back down on top of the clip. Magnifying lens will be very useful to see if connection is straight and correct. Once reconnected then flip new screen back up into back frame and screw in the four corner screws then remove the clear film screen protector. GENTLY re-snap the bezel front frame back into place. VERY CAREFULLY make small finger pinches to snap the front and back bezel frame pieces together. Small snaps all along the outside of the frame. CAUTION: If you press too hard then you may crack your new screen and will have to start all over again. Good luck.

Works exactly as well as original screen

Fixed my Lenovo 100S 11IBY with this and it's worked like a charm since.

Easy to do!

Screen was exactly as described. Easy to install, just need a small phillips screwdriver. Looks and works like new!

Full Reviews