Features:

  • Applications: Honda Accord and CR-V
  • Adapter o. D. = 79. 5mm
  • Internal Male insert o. D. = 56mm
  • Included in 11 PC. Master cylinder adapter kit - CTA 7300
  • Heavy duty design
Perfect Fit for Honda Master Cylinder Reservoirs

This product fits my 2017 Honda Civic Type R Master Cylinder like a glove. Getting the other end to work with my Motive bleeder required a trip to the hardware store. I left the existing fitting on because the threads don't appear to be standard MIP/FIP. I just stuck a 3/8 ID hose on it, clamped it down with a hose clamp, and got a 3/8 Barb to 1/4 MIP to connect the other end of the vinyl tubing to the existing connector on the power bleeder. Bled my brakes last night and it worked like a charm. Motive makes horrible adapters for MCs. The one they had for Subaru would not go on all the way and really messed up the tabs on my MC. It would go on partially and I would always be nervous pressurizing the system to 15 PSI because it popped off on me once and got brake fluid everywhere.

Good Brake Adapter for my Honda Civic

This adapter works on my 2006 Honda Civic Coupe. It fits snug and held pressure. I have a ARES(70921) brake bleeder I bought cheap off Bay. Depending on your brake bleeder, you may have to modify it to fit your connections or tube. For my set up, it was simple. I had to unscrew the quick coupler on the adapter that came with the ARES. Then, I took the quick coupler off this adapter and screwed the quick coupler into the one that came with the ARES. It fit perfect!

RIght fit for Acura MDX to use with Motive bleeder

I bought this adapter to use with my Motive bleeder for '10 Acura MDX. The cap itself creates a pretty tight fit as needed. To lock it in place though, you have to turn it half way, push down on the cap while supporting the brake reservoir, and then turn the rest of the way. Removing is just the reverse ... turn, pull up, and then turn the rest of the way. To make it work with my Motive bleeder, I didn't bother trying to replace the adapter on the cap. Instead, I bought a 3/8 ID tubing and placed it over the existing silver adapter like some of the other reviewers. Bought a hose repair kit that included a 3/8 barb and necessary clamps. It held pressure fine at 10-15 psi. Overall, it worked out great and much better solution than the one offered by Motive for Hondas/Acuras.

2015 Honda Accord Sport and 2008 Acura TL Type S

Fits 2015 Honda Accord Sport and 2008 Acura TL Type S. Really tight fit on both especially the Acura. Remove filter to get the cover all the way down. Didn’t actually bleed the brakes, just bought it to go with my mityvac Kit. The cap that came with that unit resembled an afterthought so I sought something and this was priced right, and now it fits. Just wish the connection has a 90 fitting. But I can probably modify that to my liking. My next brake bleed will verify if it hold pressure or the fluid comes up. It was two rubber rings and it is such a tight fit I had to get gloves out to remove it from the TL, so I highly doubt it will loose pressure.

simplifies the task

For my Honda's - 2010 CR-V & 2018 Civic: I connected this to a hand operated air pump using clear nylon tubing and a small hose clamp. Installed the cap on the brake reservoir. Pump up the air pressure to 15 psi and voila! Just bleed the brakes in the correct sequence and you will easily flush out old oil using the vehicle's own reservoir. Depressurize air to refill the reservoir BEFORE it goes too low - to prevent injecting air into the brake lines. Very easy and clean way to do the job. Throw away those brake bleeding vacuum pumps! Use this.

Very nice adapter, work perfectly with 2000 Civic & Accord.

Perfectly fit , No leak...very nice adapter tool for brake fluid bleeding....

Works

Worked absolutely - used other adapter (with a chain and screws) before that always created a big mess. Recommended - expensive but worth avoiding frustration.

Fits Acura’s as well

Fit my 2015 4 cylinder TLX as well as my 2018 RDX. However, with both I had to take the strainer out of the reservoir before it would fully latch. Not a big deal though as I had to take it out to suck out the old brake fluid.

Fits 2009-2014 Honda Ridgeline

Bought this after speaking with CTA tools and works like a charge. Fits my 2014 Honda Ridgeline perfectly and made pressure bleeding the brakes a breeze.

Perfect on a Honda S2000

Used an 1/8 to 1/4 pipe adapter to connect this to my Motive Products 0090 Power Bleeder Tank. It's a perfect fit for a Honda S2000

Full Reviews