Features:

  • Use drop forged and heat treated steel to offer extreme durability, and the long, parallel ground shanks with knurled handle can achieve better grip
  • The high quality chrome-vanadium steel with around hardness of 50 HRC can eliminate bending, flexing or broken when punched on; and the upgraded version tapered punch applied with classic natural finish with a dry-touch, rust-preventative coating have strong resistance to corrosion, abrasion or glaring damage
  • Small, lightweight hand tools used to install / drive hollow pins, tension pins or split roll pins, e.g. Ar15/ ar-15 bolt catch grip pin, vise block pin and pins in other ar15 parts, bolt carrier group pin, gas block roll pin, trigger guard/ charging handle roll pin, foosball men roll pin, charging handle pins or any other machinery linkage pins, etc. Specifically designed for jewelers, gunsmith, watchmakers, repairs and crafts
  • The fashionable orange punches pouch makes it more standing out in your tool room and decrease the tediousness of repair/building work; the nylon storage case also offers a great organizing solution for the punches
  • LIFETIME WARRANTY: all MulWark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement
Nice set. Got them in and 10 minutes later ...

Nice set. Got them in and 10 minutes later had my trigger guard pinned with very little effort (a drop or two of oil on the pin helped). Yeah, looking at the smaller tools if whacked good enough they'll bend but once you start getting below 1/8" in any tool they're going to have a tendency to bend under pressure (cause we won't buy titanium..). Good set, good tools to have on hand if you build EBR's or have other machining needs.

Great price great tools

I use the set immediately to finish disassembling my AR15 they worked great I have worked in fabrication for 15 years and I can tell when tools are poorly made. I can tell these are of a higher quality( most important that they are hardened properly ) and will last a long time. I pride myself on finding quality tools for a reasonable price, anyone can pay a fortune and get quality tools

Worked Perfectly for My Application

I purchased the set to remove a roll pin retaining the hammer spring in a Beretta 92FS. Worked perfect for my application. The set has a wide range of punch sizes, making it easy to match a punch with a pin. As illustrated in the product photo, the punch handles are knurled, which facilitates applying firm hand pressure without slipping. The punch ends have a slight ball radius, which helps center the punch when pushing out roll pins. I am not a gunsmith, so I do not have the experience to compare the product to other punch sets, but overall build quality appears very good, all punches were straight, with a mat finish, and no rough edges.

Doubt There Is a Better Tool for the Money

I was very pleased with the quality of this set of roll pin punches. I had to remove a deeply set roll pin and the punches that were used were more than capable. The roll pin was seated very tightly since it had never been removed from the press in 18 plus years. I had to rap the punch hard to remove the pin and was concerned it might bend. No way! The punch was perfectly straight, did not deform or mar in the slightest, and was a precise fit. Not only are these punches good looking but they are very reasonably priced. I doubt if you could find a much better tool for the money.

Only thing about the product I seen was the fact that one punch was too small while the next step up was a little big but I use a little grease and the pins stayed in while I could get them started so no complaints here and would recommend these to anyone

I used them to put 2 AR15 together and they worked really well. They were strong enough for the job. I see others on here bending there smaller punches but I had no problems but I also used a little grease to assist with the roll pins. If you have to force a roll pin then something is wrong.! Only thing about the product I seen was the fact that one punch was too small while the next step up was a little big but I use a little grease and the pins stayed in while I could get them started so no complaints here and would recommend these to anyone.

Great tool at a reasonable price.

The roll pin punch’s appear well made and durable. If used them several times, and I’m very pleased with punches. My only disappointment is the company packages the punches in a strong blister pack. Those of us with arthritic hands cannot open these packages without a pair of sharp scissors. As the baby boom population ages, and a majority of people suffer from arthritis, companies who cause their customers pain will find it difficult to to attract those customers back. Please be proactive and invest in your customers well being.

these things are pretty solid.

if you are looking for a gun kit of hard drop steel punches for gunsmith work and DONT BEND...these things are pretty solid...unless you are a uneducated caveman you cant bend these things...the 1/16 you could again if you were a tard with no motor skills you could bend it however, if you are patient with stubborn pins these things will bang them out very very strong punches.

Would buy anything I need from MulWark if they sell it.

I got an email on Jan 4th saying these punches were shipped. Had them delivered before noon on the 5th!! Unheard of shipping speed. Couldn't figure out at first what I'd gotten so quickly. They are great. They are not super hard because it could cause damage to the pins or the item you're working on. I had a tight ejector pin that came out just fine with the smallest punch. I contacted the company and shortly got a response from them answering my questions and they then went above and beyond anything I've seen from other companies. Even without the lifetime warranty I expect to use these to build all my ar's with no issues. The are made well, work as needed, come with a tight fitting pouch that seems will last as long as the punches. For any future purchases I'll see if MulWark has it and I'll order it from them and not consider buying from anyone else no matter what others may offer. I know they will stand behind their stuff. I couldn't be more satisfied with the punches, and with their responses back to me it's my first choice for buying in the future. I hope they add more products to their line so I don't have to search for someone else to buy from. Anybody else will be 2nd rate after the wonderful way they responded to me. I would ignore the low ratings. Some people could break anything... sort of a bull in china shop type person. Use the tools as they are made to be used and you'll have no issues. If you do, MulWark will make it right.

Awsom steal punches for the price.

Out standing for the price. I have used a bunch of different punches over The Years most don't last long. They Are Made Of cheap low quality steal and Benn quickly. Not these they are machined from quality steal and should last much longer. The simple on the end helps keep roll pins centered while driving helping to avoid the punch slipping s d damaging the finish.

Happy I chose MulWark. Very well made tools.

These are well made sturdy punches. Used the 3/32 punch to remove the firing pin retaining roll pin from my Sig Sauer pistol and it worked perfectly. As far as I can tell these are very hard punches and didn't have any bend or softness to them. Comes with a nice tool roll to keep them organized. Great addition to my gun tools. I'm happy I chose MulWark.

Full Reviews