Features:

  • ENGINEERED TO DELIVER A BIGGER IMAGE --- Our car door mirrors have a unique engineered design to solve your blind spot problem and show a bigger image of what is really needed by drivers. We know you don't need to see the sun in your mirrors like other mirrors will show.
  • NO FAIL ADHESIVE BLIND SPOT MIRRORS --- We understand the importance of the adhesive on your car mirrors thus we use only outdoor and water rated adhesive and high reflective silver film mirrors for our mirrors.
  • AFRAID OF CHANGING LANES --- We know that anxious feeling when changing lanes or merging highways and not knowing if there is a car right next to us. It is a horrible feeling for you and for the other driver. That's why our unique engineered design for better visibility.
  • WE STAND FOR SAFETY IN DRIVING --- “LOOK Twice for Motorcycles” is a TEXAS Dot safety campaign. We promote it and we believe in supporting such campaigns.
  • FRAMELESS MIRRORS FOR AESTHETICS --- Our mirrors were designed to look like a car original part / OEM part.
nice set of mirrors

great looking blind spot mirrors, just installed today(4-8-19) i cleaned the car mirrors real good with alcohol then peeled the tape of the back and stuck them on,, be careful when applying them as once you touch them to the mirror they are stuck my drivers side got just a little off but believe i can live with it ,if not i will remove and use new tape. the mirrors themselves look like really great material not like the cheap stuff you get at the parts store. looks like eye glass quality. images are real clear and of great size. to see i compared it to the ones i had on and about 200 percent better looking and a lot better results, will report back after a few months of Alabama heat does to them. but with a 2 yr warranty looks like a great product to me...

Product gives a "OEM" look to side mirrors

I liked the "clean" look of the edges of the mirror. No ugly border. My suggestion would be to make a more "customizable" mounting pad. I noticed that the manufacturer added a small strip on one side of the main adhesive pad to give the mirror its angle. If that customized pad could br left unattached to the mirror, it could be rotated before applying, to give a more precise angle for a "perfect" view. However, the mirror does great just the way it came. I would buy again. In fact I DID buy them again, because when I tried to “wedge” the drivers’ side mirror to get that “perfect angle”, the adhesive pad couldn’t take the stress, and it fell off in my driveway, and broke. It was kind of a blessing in disguise, for two reasons. First, it looks like you improved the mounting system to incorporate a plastic angled piece to avoid using differing thicknesses of adhesive strips to achieve the correct angle, as it was on the original one. Second, I had this broken one in my hand, so I experimented. I made a template of my 2006 Toyota Siennas’ drivers mirror. I was able to use that template to “sand” the mirror to more “fit” the upper left profile of my particular mirror, and it didn’t break. So I tried it on the replacement. If I thought it had an OEM look before, you should see it now! Excellent treatment on the back side of the mirror. I also treated the sanded edge with an epoxy paint to prevent erosion of the mirror plating from the new edge. I think I’m “Good to Go” Thanks

Works very well

These mirrors are very well made and easy to mount. They provide a much better than average side view to the driver and don't take up too much room on your mirrors. Wish they would provide some guidance of where the best place is to mount the mirrors on your sideview mirrors. I placed mine on the upper left portion of the mirror but think they'd work better in the lower left position. Unfortunately, you can't remove the mirrors once mounted and remount them in a different position.

Great item - that won't fall off...

I've used Blind Stop mirrors for many years. They all did the job some what, but these are about as good as you're gonna get. I only installed the drivers side mirror. How I install the mirror(s) - first clean car side view mirror with alcohol - let dry - then peel off backing of Blind Spot mirror - then I put a small dab of RTV (about 1/8" in diameter) in the middle of the adhesive stick tape of the mirror - then place in position as instructed in the instructions. The RTV silicone rubber together with the stick-on adhesive will hold the mirror in place year round. If removal is needed, simply slip a knife edge tool to dislodge and a razor blade to clean off any residue on the mirror left by the adhesive and RTV. RTV needs 2 hours to set and 24 hours to cure at or above 70 deg F. During that time the adhesive will hold the mirror - then the RTV will make sure it stays in place. You probably don't need the extra step of using the RTV IF you clean the mirror with alcohol - but I've always put the RTV on for extra strength and none of my add-on mirrors have ever fallen off. Again - this is a VERY good Blind Spot mirror. I recently purchased a second pair - for my next car.

Great Mirror Good Look

I like the frameless mirror, it replaced a framed rectangular mirror I loved and had for years, but one of those got knocked off by a piece of flying rubber. The Utopicar mirrors look nice and give a larger view than my others, so it was a good thing to loose the old mirror. As far as adhesive, I have not found an adhesive that hold up to Louisiana heat. I always add double sided 3M outdoor sign tape, just a small piece and they stay put, until hit by an 18 wheeler stray hiway rubber. I would buy them again in the future.

Great for price

Right now 5 stars. If the double stick tape holds it will forever rate 5 stars. Clean appearance and work great just like stock blind spot mirror works. Worth the price to try it out. Still after 3 weeks I would highly rate the product.

Great Coverage

I’ve tried a few different blind spot mirrors and by far, these are the best! Great coverage and the compound curves in the shape make it easy to get them to fit in the corner of your mirror. Just remember to get your placement correct the first time because the glue is strong and when they’re stuck, they’re stuck! No adjustments and no second chances!

Good value. Work as intended.

I purchased these for my Toyota FJ Cruiser due to the large blind spots to the rear. These fit my mirrors nicely due to the wide radius on the outside edge. I like that they don't have a chrome or plastic rim to make them stand out. They look more like a part of the existing mirrors. The seller Utopicar has been very proactive in that they emailed good installation instructions and followed up to verify i was happy.

Helps me back out of parking spots

This is my second set of mirrors. My previous set were round and one recently got knock of the swivel in a car wash. I really missed the mirror so started looking for a new set. Thought these would be better than the previous one and I think they are. Yes the vehicles look smaller but it still lets you know there is a vehicle there. I recently had neck surgery so can't turn my head enough to see the back of my car to back out of parking space and these give me a view to either side of the car and really makes backing up safe.

Excellent Rear View

At this point, I have to give these 5 stars. The Blind Spot vision is excellent. I had the small round 1.75 inch blind spot mirrors, and there is no comparison. I put the mirrors in the upper outside corners as directed, and they are perfect. There is simply no blind spot. My only concern, at this point, is whether they will hold up through repeated car washes. My little 1.75 round mirrors came off after a few washes. Utopicar contends they have made these with No Fail Adhesive. I hope they're right.

Full Reviews