• 【Easy to Install】Ground fault circuit interrupter with surge protection
  • 【Safety Leakproof】Replacing your general plug of power tool with this GFCI Plug, to protect you from electric shock
  • 【Durable】ETL listed,rugged design and construction, built to withstand heavy use
  • 【Clear Instructions】Power indicator lamp goes OFF if GFCI trips, power is interrupted or GFCI is unplugged
  • 【Widely Use】Replacement GFCI plug unit for washing machine, air conditioner,hair Dryer,other electrical appliances

Was skeptical when purchasing, more moreso when compared to old plug, but with the least amount of wire modification it works great. It's September now: been running the A/C for 3 months straight and no issues.

I bought this because I had purchased a pool pump for our pool. I set it up and plugged it in and nothing happened. I contacted the company and they are sending a new unit, but in the meantime I thought the most obvious solution would be to replace the ground fault plug since when I plugged it in, neither of the test or reset buttons did anything. I figured that was the problem. I received this, replaced the original ground fault plug, plugged it in and it worked like a charm! Glad I didn't have to wait to receive the replacement pump from the company.

Installed as a replacement on my electric power washer. It fixed the problem. Quality seems good.

I thought I was going to have to replace my old pressure washer. The GFCI plug was clicking and rattling and the little red light was barely visible. It would not turn on. This was a simple wire swap and took about 10 minutes. Pressure washer works perfectly fine again. I have attached a picture of the old one and the replacement.

Exactly what I needed to get my power washer working again. I figured I had one if two problems with my power washer, so I tried the cheaper option of replacing the GFCI plug. It was easy to hook this up and get it going.

Works well, however, it is not waterproof. If it will be out in the rain I recommend helping it seal with electrical tape or covering it from direct rain or water. Also, I used a thicker gauge and it barely fits through the rubber opening at the bottom, just keep that in mind.

Nearly identical to some Intex pool GFI plugs, and good enough to replace mine that squirrels destroyed. I hate squirrels. Really, really hate them. A lot.

Easy installation, allowed me to repair my powerwasher instead of replacing it. Seems to work fine, though I have not tried electrocuting myself to see how well it protects me.

Great replacement plug. My pressure washer "died" after only a few hours of use. Did a little checking and it was the GFCI plug that was bad, fortunately not the washer. This plug was easy to install and works great. One feature it has that is better than the old one is the power indicator. Real convenient to verify that the outlet you are using and the GFCI are OK.

This plug arrived within two days of order. It seems well made. I particularly like the design that clamps the cord inside this plug so that an accidental pull on the cord will not put undue pressure on the wire connections inside. I replaced a microwave oven plug that melted down because the built-in microwave had gotten pushed back against the original plug and caused a melt down. Replacement cord from GE is no longer available and would be exorbitantly expensive if it were. It took only a few minutes to install and place spacers against the rear of the microwave receptacle to prevent the unit from being pushed back far enough to press the reset button on the plug. It works. I will probably purchase another one if a plug on any of my other devices is damaged and needs to be replaced. The ground fault feature is a most desirable one.