Features:

  • MOVOTOR Smoked Harley Davidson Led running/brake integrated turn signal lights, upgrade your stock tail light. Lay Down Style, which is angled to follow the curve of your rear fender for the streamline look.
  • Functions All in one: This Harley taillights can be used as running light, brake light, turn signal light(turn left/right). White Light used as license plate light; The brake light and turn signals light built together. Providing good visibility, it makes your driving much safer.
  • Fitment: Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models (except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE);All 2002-2010 FXST Models (except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCW/C);1991-2010 Electra Glides (except 2005 FLHTCSE, 2009 FLHT Standard).
  • Specifications:Voltage: 12V DC; LED Quantity: 60LEDs; Lifespan: above 30000 hours; Wire for functions: Running--White Wire, Brake--Red Wire and Turn Signal: Yellow wire-- right turning; Blue wire-- left turning; Black wire--Negative.
  • Package: 1 Piece Harley Smoked Led Tail Light +1 piece Gasket, come with the gasket to prevent water infiltration. Warranty:12 months quality warranty make sure you get risk-free tail light.
Fit and worked good really like the integrated turn signals

Fit and worked good really like the integrated turn signals. It is much brighter than stock even with the smoked lens. This in not plug and play so if you not experienced with a soldering iron you may want to pass. I also had an issue with the original the vendor was very responsive and resolved my issue timely via email.

04 Road King looking good

Oh wow, by far the best looking low profile smoking hot bright thing of them all. And not that expensive. I would pay few more buck to have with connector, those connector are hard to find with the pins. I did have to put in pieces the original connector and weld the wires to it. (kind of rigging it) The wiring is easy. It come with a good thick foam to waterproof the thing but I kind of have dought that would be sufficient to prevent water infiltration and mess up the thing with all the welds exposed at the back, down to the bottom. I did add some gorilla tape ;-) to prevent infiltration from the big opening of the original fixture to prevent water to infiltrate the thing. I'm concerned if water find it way there or condensation, there's no way out. I'll see if it's an issue, I ride rain or shine than I will know and pass on the info. See the pic, it worth a thousand words, the final look priceless, Love-it

Looks sharp!

Easy to install and love the look! Only thing I would say they could change is add plug ends on for the turn signals so it's True plug n play, but still a 5 star item!

AWESOME LED Taillight

I'm in love with my new taillight. It's so much brighter than my old one and I love having the turn signals in with it. I've always wanted one myself, when I saw it on others...FINALLY I have my own and very happy with it. It was very easy to install as well, with great instructions & manual....even a blonde can do it (no disrespect to blondes, because I am a blonde myself). If you're in the market for a great taillight....get this one. Can't go wrong with this one.

Well worth the price

Took only 15/20 minutes to install this light. Some light soldering is needed to remove and replace the stock turn signals but was a real easy job. The light is so much brighter than I would have expected. Easily seen during daylight and the turn signals work very well. Super happy about the new look of my bike.

Look great

This light is awesome! It looks great; I get compliments on it all the time. It stands off about half as far as stock sporty brake lights and are quite bright despite the smoked out look. Expect to need in-line resistors if you use LED front blinkers as well.

Solid brake light for my 2014 King

Was a perfect fit for my 2014 Road King. Install with relatively simple but you need to make sure so either heat shrink or really get a secure crampy during install or you risk getting a short. It's not a plug and play wire harness so you need to cut wires and hear them yourself. But it's bright and looks good.

Looks very good

Looks good on my 2004 Sportster Custom. Installation took about fifteen minutes. I connected the turning lights wires to the stock ones, so that they all turn on. Works well.

Full Reviews