Features:

  • Voltage:12V; Color:6000K xenon white; Power:2W/PC; Lumen:240LM/PC; Dimensions:12*26mm; Net Weight:2g/PC. Low power consumption for longer life span
  • Each bulb has twenty-four 3014 SMD on it, 360 degree lighting angle,no blind spot,super bright brings your car a refreshed new look
  • Fit bulb sizes: 168,175,194,2825,W5W,T10.Easy to install, just plug and play.Canbus error free,no error after installation
  • Wide application: The led bulbs can be used for license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb etc
  • Package includes 10pcs AUXITO Led bulbs.We offer 12 months warranty on item(s) damaged during the shipping or confirmed to be a manufactory defect. Friendly customer service responses within 24 hours on business days
They are not only very bright but they are very similar in size to the halogen bulbs so there is nothing to worry about if you’r

Really bright and really reliable. These are not like the other LED’s with the two wires sticking out the plastic bottom which could become loose and lose connection. Because of the flat metal connection it was a great replacement for the old cheap LED I had in my license plate light. They are not only very bright but they are very similar in size to the halogen bulbs so there is nothing to worry about if you’re putting this in a tight enclosure like the license plate light bracket.

Very bright LED and almost daylight in color temp

These have been great in my 2016 Lexus RX 350 F Sport. Very bright LED and almost daylight in color temp. The quality of the bulb looks to be well made, unlike some other LED bulbs that I have bought on Amazon before. Longevity has yet to be tested, as I have only used these for about 1 year. I have these LED bulbs, by Auxito, installed in my: vanity lights x2, cargo area x3 and dome light x2. So in total, I have 7 of these bulbs in my car for close to a year now without any issues. I will report back in a few months with another update for everyone. Cheers.

Nice white light - 2017 Civic Type R

I just received these so no longevity info here. I have a 2017 Civic Type R and replaced the map lights, dome light, and rear hatch light with these and they produce a nice, white light. They're definitely brighter than the stock tungsten bulbs, but they're not obnoxiously bright. If you want the crazy bright LEDs that make your car seem like it's daytime, this is not the right bulb for you. These are for you if you want a white (maybe a very slight blue tint) light with a noticeable increase in light output, but nothing blinding. The pictures I have attached are of the original hatch light and this AUXITO 194 LED light. Pictures were taken in manual mode with identical settings and white balance set to 6500k for both pictures.

If they will last, I found my goto brand!!!

Aucito is on the left in the picture. Don’t know about longevity yet, but out of the package, man! Much brighter and much better quality than the LEDs I had before it....and the previous one was impressive until they started dying with in a year of purchase.....

High quality, super bright, perfect 194 halogen replacement. Get these, don't go cheaper.

These bulbs are very good quality, made out of metal unlike most, chips are built in, super bright (MUCH better than the 5x 5050SMD LED bulbs and I thought those were good), dimmable. The 10 pack was just enough for me to do every 194 on my car so it worked out perfect! My interior was pathetically lit by six 194 bulbs, the halogens were super dim and did almost nothing. Now they are GREAT! Installation can be a bit tricky in some of the smaller spots they like to put these bulbs. The boards on the base of these can be a little thicker than the wedge on a glass bulb but they actually provided a little plastic tool that can be used to open up the socket a little and make them fit perfectly. Highly recommended for areas where you CANNOT use any bulb that is larger than a halogen 194 due to space limitations. These are pretty much a dead on match for size and pack a lot of light into a small package. The pictures I posted of my interior are lit with only 2 map lights in the rear view mirror, 2 small courtesy lights above the rear door and 2 under the dashboard footwell. I will buy from Auxito again for my future LED needs!

Great Brightness (160 Lumens) but Questionable CAN-Bus Error Free

Despite the seller's claim that this LED provides 240 lumens, I measured ten samples of these T10 bulbs at approximately 160 lumens. I also measured the current at approximately 129 mA which at 12 volts is about 1.5 watts. This equates to about 107 Lumens per watt. By comparison, most LEDs are between 60 to 120 lumens per watt, and the present state of the art is around 200. Regarding brightness, #194 bulbs are typically around 24 lumens, #168 bulbs are around 36 lumens, and #2825 bulbs are around 50 lumens. Regarding specifications, the specs I have seen on the 3014 chip set indicate that 24 chips have the potential to produce around 312 lumens. Accordingly, the general lessen in this is to not trust that all LED bulbs are designed or built to operate at the maximum chip-set ratings. Also, my observation is that few sellers report actual measured lumens, and many sellers simply report the maximum rating per chip multiplied by the number of chips. I suspect because some sellers exaggerate the lumens this way, others feel the need to do the same to be competitive. If a seller claims that a one watt LED bulb provides 400 lumens, this is beyond the present state of the art, and it is more likely that the output is between 60 and 120 lumens. Regarding CAN-Bus compatibility and being error free, CAN-Bus compatibility simply means that the automobile contains a current sensor that senses whether the bulb appears to be drawing some level of current representative of the operation of the original bulb. Ever since the use of the CAN-Bus, it then became possible to report such an error from a sensor over the CAN Bus. Some older cars also had sensors but reported the errors using other wiring. Regarding bulb failures, the CAN-Bus reporting system is more typically utilized on more essential lighting like headlamps, stoplights, and taillights, and less likely on festoon type bulbs or interior bulbs. Also, technically the only way a replacement bulb can be guaranteed to be error free is for it to draw the same or more current as the originally specified bulb. For example, a 4 watt #194 bulb draws about 0.27 amps (270 mA). And although the threshold for error detection may be significant less than that, it is also possible (though unlikely) for that threshold to be above the 129 mA drawn by this bulb. In this respect, although claiming CAN-Bus compatibility for a #194 bulb may be essentially true, the compatibility can become less likely for higher wattage bulbs like #2825 that draws 0.37 amps (370 mA). I cannot attest to reliability or longevity.

These are extremely bright!

I have bought many LED chipsets and most usually arrive in very poor packaging with little protection during shipping. These however came in a sealed anti static bag and provided a pry tool for installation. I have had no error codes and the LED do not remain illuminated when switched off. There is no outside resistors needed for these making them plug and play. These are extremely bright! I would recommend super white for interior or any other T10 slot you wish to upgrade to a more modern look. The true test in my experience is time, I'm hoping these will hold up as they do not feel cheaply made.

These are great bulbs!

Replaced Sealight 194 LED bulbs that I installed a few weeks ago. The Sealight 194's were flat like a Popsicle stick with 4 LED chips on each side. The Sealight 194's also had surface mount resistors between the contact pads that stretched the contacts in the sockets. I used a tiny screwdriver to bend the contacts back into shape before installing the Auxito 194 lamps. The Auxito 194's fit into the sockets like the original bulbs. What a difference with these bulbs! These Auxito 194 LED bulbs look more like the halogen bulbs thru the lens covers, whereas the Sealight still looked like Popsicle sticks behind the lens covers. The Auxito 194's are at least twice as bright as the Sealight 194's and my trunk and interior map lights are perfect now. I'm leaving the Sealight 194 bulbs in the license plate lights because they are really bright for the license plate and these Auxito 194's may be way too bright for the plate.

Cool white, error-free, BRIGHT!

These are perfect for my needs. Quality product, packaging, with built-in CANBUS load resistors. Very bright - great for DRL, or parking light, reverse lights, etc. Maybe a bit bright for interior use like map lights, etc., but it may be fine for some people. Very happy with the value these represent. (PHOTOS ATTACHED: yellow-ish is OEM halogen incandescent bulb, Cool white, brighter, is how these LED’s look. BIG IMPROVEMENT!)

Crazy bright, canbus resistors built in. Plug and play.

Holy crap bright. Bought these to replace the lights on my ninja 650, brilliant white no more yellow halogen. Running lights and brake lights are super bright now. Completely changed the look of the bike. Quality is perfect. Extremely durable and the base can be trimmed to fit small spaces. Just look at the picture. No bs here. UPDATE Sooo I figured out these fit the dash of my 09 ninja... Immediately ripped it out and replaced them all.... Night and day difference. See Pic obviously. The blue is brighter and crisper. I didn't replace the dummy lights because it was overpowering, they are fine with the halogens. This is easily one of my favorite purchases on Amazon. Just buy them.

Full Reviews