Features:

  • šŸ’•Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
  • šŸ’•Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
  • šŸ’•COMPATIBILITY: Rubber Door Bumper Protective strip can be Free deformation and Free clipping.requires no special skills or tools,Length is adjustable to your car, Equipped with screws to achieve better adhesion and fixation.
  • šŸ’•Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
  • šŸ’•carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty!ļ¼ˆcase of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!ļ¼‰
Not to bad!!

I love how it looks. The only problem I had was with the tape it came with. I had to used my 3m tape and it work just fine. But overall it looks pretty good.

Love it !

This is a top quality product that will give your vehicle more aggressive look! The quality of the rubber is superb along with the carbon fiber look this is a must have for anyone looking for a inexpensive upgrade to thief vehicle !

I expected to get a good product just from seeing all the results and comments ...

I expected to get a good product just from seeing all the results and comments people had left, but man it did not disappoint. I bought the red version, and it arrived without the 'Samurai'. Meh, so be it, didn't mind it anyway. But it made the Genesis just look so much more beautiful. Aggressive without being too much/flashy. Just a nice red outline in front of some glossy carbon fiber and it works beautifully. 3M tape was perfect, no problems at all (As you can see from the pictures it has been enduring plenty of rain). I ended up buying a red hub rim protector to go with it and my car went from 10/10 to 15/10. Will most likely buy again for the sides. Great product great price.

Works great

Been holding up I've already hit a rock maybe a big lump of dirt but it took most the impact kinda glad I had it on cause I have hit anything until driving one day thru a canyon and a random rock was in the middle of the road, also looks good been thinking of putting it on my side as a side skirt. Looks great and been holding up and I also had self tapping screws so I put more then 1 every foot in the front cause the curves and bend in the bumper my side are straight will probably just put one every foot feels strong looks good does what it's supposed to do

For the price, this product is awesome

So, I am an avid amazon reviewer. Read a lot of these reviews for this product and I have to say, this stuff works great. People say it came off, itā€™s probably because their car is still dirty AF and they didnā€™t use the prep wipes or clean it at all. And as for the corners, I cut it just like it said, and it bent the corner with ease. I put a couple screws in the bend to ensure it stays. But the 3M works like a champ. I dig it

very happy

Ok.. here's my review..car is an 04 Acura TL. First thing I did was unroll it and lay it flat on my wood floor for a day to try and take out the unevenness from shipping. I read all the feedback on this before ordering. I knew some had issues with the 3M tape, however I had no issues whatsoever. Here's my thinking; the tape is plenty strong enuf to adhere the thing to your car.. but probably not strong enuf for a permanent, weatherproof bond...(i live in Ohio).. So I figured the tape will hold your chin spoiler in place long enough to see if you actually like it well enough to drill holes in your car or to make any adjustments if you don't get it 100% perfect on the first try... then if your happy with it, add screws.. the material itself is what I expected.. it's a nice glossy carbon fiber faux finish on a rubber strip with 3M tape on it... it's sturdy enough that it doesn't sag at all.. it's flexible after installing but retains it's shape.. easy to cut with kitchen shears.. update 12/22/17..this thing is still on strong.. I still haven't put any screws in it and it hasn't budged at all.. not sure why others have problems with the tape.. update 1/27.. just drove to Michigan and back... 500+ miles round trip and it still hasn't budged.. not one inch of it has come unstuck... still haven't put ANY screws in it.. update 3/1/18: still on strong.. not 1 sign of it coming off.. still no screws in it and it just made it thru an Ohio winter.. I may screw it on this spring just to finalize the installation process since I know now that it looks good and I like it.. Update: 2/27/19 still on with no signs of it coming loose at all.. not 1 screw in it...

Invest in prep time

Installed on a Subaru Crosstrek. Be advised that it has an obnoxious chemical smell upon opening. Just lay it flat in an unoccupied room for a few days. The smell mostly goes away. The installation instructions were in Thai. Lol But there are pictures tho. Had to clean the underside well with wipes/soap/water/alcohol. The cleaning may take a few rounds, but very important. It wonā€™t stick to a dirty surface so donā€™t get mad if it falls off later on bc youā€™re too lazy to spend the extra 5-10 minutes to really clean the underside. (Just saying.) It comes with two adhesive promoters but it should have come with 3. They dry out pretty quick, but are essential for the adhesion process. It does take some time to measure and cut out the ā€œtrianglesā€ for the bends. I just used a pen to mark on the red tape to guesstimate where the bends are and marked the triangles from there. Also, youā€™ll have to force the lip to bend. The lip is rubber, itā€™s not all that elastic. Would also recommend utility scissors to cut the triangles too. The rubber is thick enough that Iā€™m not sure normal scissors will get the job done. I had to use two hands to clomp down on the scissor handles. Itā€™s been 3 days since the lip application. Hasnā€™t fallen off so thatā€™s good. Also havenā€™t used the screws yet but will probably put them on. Havenā€™t braved sending it thru a car wash just yet so may have to send an update for that later on. All in all I like it so far. Considering buying two more for the side skirts IF the front lip lasts thru a car wash. Lol I do like that itā€™s rubber bc cracking a real lip kit would make me cry. *Update (4/3/18): Front lip still on after 4 automatic car washes and a couple of thunderstorms later. Still havenā€™t gotten around to putting the screws on either. šŸ‘ **Update (2/4/19): Front lip still on. Eventually had to add 2 screws to one of the bends bc it was starting to fall off at the ā€˜corner.ā€™ (This was the same place I had to cut ā€œtrianglesā€ to make it bend.) The screws were recently installed in Jan. 2019 so the lip held up well with all things considered. Sadly the front lip had an unfortunate run in today with old debris from a blown tire. The car in front of me kicked it up so fast that I didnā€™t have time to swerve or brake safely at highway speeds. Poor car took it like a champ. =/ Oddly enough, the lip is still on. However, the center portion of the lip split horizontally right where the lip and adhesive part meets in the middle. Will probably have to replace it eventually as rubber will degrade making the gap even longer. However, I will be purchasing another three once itā€™s time. Iā€™ll redo the front lip but also add side skirts.

It looks very nice; I wish it would have a strong adhesive ...

It looks very nice; I wish it would have a strong adhesive for application! I had to tie it with a small size screws and washer for securing it to the bumper. personally I like it in my Tesla Model S looks great....

Such an Impact Visually!

I have done many things to my car (Muffler, Spoiler, Hood Scoop, Smoked Lights, Etc.), but this splitter added a HUGE amount to the front. It looks so much cooler with this on it! It does have 3M tape, and comes with six small screws. But with as many curves as my bumper has, I used... 28 screws. Which I would actually recommend, because it makes it look more snug, and less like a stick on splitter. The Samurai sticker also looks very cool. I would highly recommend this!

Full Reviews