Features:

  • Super brightness: Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency
  • Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
  • Adjustable mounting bracket: the mounting bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed
  • High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan
  • Package include: 1PC 15inch LED light bar and mounting brackets
Product Works As Advertised (regardless of user-error reviews)!!

There are a lot of "user-error" reviews on this product, so I thought I'd jump in and help you with the potential purchase of this item. I've owned this set since September of 2015 and have had ZERO ISSUES with them. They are installed in place of my factory fog lights, and I use them solely for fog, rain, and off-road conditions. I've put them through mud, harsh rains, heavy fog, snow, ice, sleet, swarms of bugs, and intense heat (112+ degs F) in the Death Valley NP. Never have I had issues with these lights! Wiring is easy, and the brackets are very durable. The housing does not leak, nor does the weather seal around the frame/lens deteriorate over time. The light throw is wide, direct, and is equally as bright as one single LED light bar. When aimed correctly, can cover from bumper to over 50 yards in front before losing lumens. Does not blind drivers and yet still maintains a nice wash while driving. -- It still amazes me how well it cuts through fog and rain when driving on the freeway. When they are on, I can clearly see the painted lines and street signs while maintaining a safe distance behind other vehicles. I bought two more in early 2016 for another project, and will buy them again in the future. I'm guessing the poor comments about this product are a result of users not knowing how to install them correctly, how to wire them, or even use them as designed. If you can crimp two wires together and power them with a 12VDC source (or via a switch and relay as I have done), then you should have no problems installing and operating them. Heck, test them with a 9V battery and see for yourself how bright they are! Just imagine what 12V does! :-D Why spend $$$ for the same lights when you can buy these for under $15! Makes no sense to look elsewhere. *shrugs* Just sayin'. Anyways, thought I'd write my review here, which was my own and was not paid or promoted to do so. I just get so tired of "user-error" comments that dull the product's validity and I figured you (the reader/future buyer) needed a fresh perspective and a good positive review. Hope this has helped.

Good so far

Just recieved and tested these units. All factory hardware needed tightening but the units powered up well. They seem very bright on the bench but I'll revisit this review after installing them on my trucks bull bar. Having used other units from this seller I'm not expecting any problems. Specs as measured on the test bench using a Rigol DP1116A power supply and a Rigol DM3058E dmm; 4.4 amps +/- 100 ma @ 13.2 vdc each. Power works out to 58 watts each. After using these units for a few months I nothing but good things to say. NO noise on my radio as others have mentioned, probably because of bad grounding on their part. NO issueszwith the mounting hardware, NO issues with water intrusion. I would highly recommend these lights and am changing my rating to 5 stars.

Very bright. You won't regret the purchase.

Bought this about a year ago and installed on Kubota rtv-1100. Replaced the Kubota halogen work lights that I purchased with the machine for $300. Those were adequate for plowing but I wanted more light so went with this light bar. Installation was a hassle but that had more to do with the vehicle than the light bar. Fabricated 3 new mounting brackets for front and move Kubota work lights to rear so that I could have light out back for backing in the dark. Had to cut and splice the harness above the headliner and add an extra switch. Bought the Nilight harness as well which made things easier. Once I fired it up couldn't believe the difference. Like plowing in broad daylight. Blinding if you look directly into it. For a hundred bucks and a couple days work one of the best investments I have ever made. No moisture in light after sitting outside for almost a year.

and the distance that they project light is also better. The mounting brackets are also way more solid

Bought these to replace a set of fog lights with 55W H3 halogen / xenon bulbs. These lights are way brighter than the H3, and the distance that they project light is also better. The mounting brackets are also way more solid; and eliminate (almost) all of the vibration that I had with my old lights. The body of the lights are metal, the end caps are (really solid) plastic, the lenses are clear plastic. The end caps are secured with 3 (aprox.) 1" long allen head, machine thread screws that fasten to the body solidly. The lens fits really tight in the light housing and then are secured with 4 allen head screws. The end caps are sealed to the body/housing with rubber gaskets, the lens is sealed to the body/housing with 2 silicone seals. I cannot say that the lights are waterproof but they are VERY water resistant. I have never come across an aftermarket light, anywhere near this price, that is this quality. Side note: I put transparent amber film on the lenses to make them more like fog lights; the lights are so bright that it's like the amber film isn't even there.

They are Good. Bright. Good Pattern.

Pretty good. Reasonably bright. I'm not blown away, but they do what I need them to. I coated them with amber film and used them for perimeter lights facing down on my roof rack. At this low price I am happy with them. When I purchased I didnt realize they came with no wiring harness or connectors of any kind, but luckily I usually wire my own lights anyways for extra protection and waterproofing. They APPEAR to be sealed well, but as I am mounting them inverted and sideways, I went to great lengths re-sealing them myself.

I plan on buying more!A+++

These lights are very bright and perfect for my application. I installed them on my 1968 MF tractor. The OEM ones were not very bright. Don't be fooled by the price on these inexpensive lights. I would put these up against the most expensive ones,as being equally as good, but better because of the price! Super easy install when using the Nilight wiring harness kit, purchased separately. I plan on buying more of these for my ATV's and anything else I can use them on!!! Thank you!! A+++

Great lights easy to install

I put these on my 88 f150 to help light the road. They're very bright, easy to install, and the yellow light is much easier on the eyes. I've been using them about 2 months now the yellow is awesome in the fog. I'll repost if I have any problems with them, they've already been exposed to so pretty substantial rain storms and no fogging so they're well built, aluminum housing with steel mounts. They hold position extremely well. The only issue i had with the install was yhey were still pointed to far down even when the adjustment slot was maxed out i bent the bracket just a little and they're perfect now. I'll definitely buy again. Also they don't come with a switch or wire and fuse so you'll have to buy that separately.

Need wires to be longer + wires kit need it included just add $15 extra

Just install on my 2019 Mercedes Sprinter I like how it’s look now👊was not sure what’s the best way to install it don’t have place on the bumper and don’t want to cut any holes on it Start to look the ideas on the e-net. Bought on Amazon few different yellow led nilight, bar , etc and start to collect everything together had three different ideas on the end made the four one . Need it for winter /rain/ Fog/ lives in Cali need it now for heavy Smog 😞

Look great, amazing for the price.

These come with very short power / ground wiring, make sure you either have a wiring kit or spare 14-16 gauge ready to go for the install (highly recommend the Nilite solder seal connects!). I cut of the switch that came with the wiring kit and ran to a rugged ridge switch pod. Just installed these, so I don't know how they hold up over time, but for the price, even if it's only a season or two, these are awesome. Love the look.

Great quality lights

I am always amazed how well nilight products are packaged. Very nice boxes and plenty of foam to make sure they are not damaged while being delivered. With that said, this light bar has met all my expectations. Every single light within the light bar shine extremely bright. After some use in the rain and mid on my ranger there seems to be no water entering the light and it works great. I have bought many nilight products over the past couple years, and I have not had a single malfunction. Great products and I will continue to buy nilight products in the future.

Full Reviews