Features:

  • Easy to Install: There are two option to use the phone clip: 1. Screw directly to the tripod with pivoting arm, being able to 360 degrees to rotate. 2. Remove the clip from pivoting arm and then mount on a tripod.
  • The swivel is also easy to change the Camera,Camcorder and smartphone's orientation (360° rotation) when taking pictures.Inner padding secure your device well and protect it from damage.
  • 1/4" Standard Screw: Attachable to any regular sized tripod, monopod and smartphone with standard 1/4" screw thread at the bottom.
  • Compact&Portable:Helps you shoot steady video for Facebook Live, Periscope, and other microphone live streaming Vlogging platforms Its light weight design and easy portability mean that you can put it in your pocket or your briefcase and take it everywhere you go. And you will be ready for the perfect Lens picture at any time.
  • [12-Month Warranty]Retractable&Detachable Holder: Retractable Camera,Camcorder, phone holder fits most cellphones,Cameras,Camcorders and selfie sticks(width between 56mm - 105mm ),including iPhone X/Xs/XR/Xs Max,8/7/6/6s, iPhone 6/6s plus, iphone SE/5s/5/5c,Samsung Galaxy s10s10 plus S9/S9+,S8/S8+/S7/S6/S6 edge, Note 9 8 5 4 3 and so on. And it extremely easy to get adjusted to hold or release your phone.
Works for me

Just what I needed, my phone Xperia XZ Premium fits securely into the adapter. Build quality isn't bad either. My phone is not in the images because I was using it to take pictures.

Simple, Inexpensive, Works Great!

The Ailun Phone Tripod Mount Adapter works just as described. Form is simple and function is easy and self-explanatory. Works for landscape recording and upright recording. The only improvement I can think of would be to add a few white marks to line up a few different angles exactly, such as 90 and 45 degrees. I have seen other cell-phone tripod mount adapters that look the exact same as this brand. They may perform as well, but I have not utilized them, so I can't compare them. For the price, this is a great phone tripod mount adapter. Watch my video review of this phone tripod mount on Youtube by PsychOtto.

Inexpensive, affordable device that works better than spring loaded devices.

Here's how I use it: Background: I occasionally take video with my iPhone while I shoot still photos with a dSLR. Typically I will hold my iPhone under or above the lens while shooting. I wanted a flexible inexpensive system in which I could mount the iPhone or other small video device atop the hot shoe of my camera. I started with the Camkix Hot Shoe Mount Adapter Kit - Attach your Phone or GoPro Hero to the Flash Mount of your DSLR Camera - Record your Photo Shoot or use Phone Apps for Lighting, Monitoring or Controlling for $10.98 on amazon. I chose this over Fotasy SCX2 1/4-Inch 20 Tripod Screw to Hot Shoe Adapter with Premier Cleaning Cloth (Black) for $5.69 on amazon because I also wanted the tilt adjustable bracket holder and $10.98 was a good price for the combo. The nice thing about the tilt connector is it allows me to align both the camera and the phone so they are centered over the same subject. Both parts are metal. No instructions, but it’s pretty intuitive if you’re used to working with tripod brackets. The hot shoe plate is 18x18mm which allows it to rotate within the 19mm wide camera hot shoe. Just tighten the screw nut to prevent motion. Don’t expect this inexpensive system to be firm. Torque from the weight of the iphone/tablet will loosen the connections if shooting handheld unless you use locktite. Generally fine on a tripod, but recheck the tightness of the connections from time to time. The phone holder that comes with the Camkix hotshoe mount adapter kit is spring loaded plastic. Stretched to its limit, take a fair amount of force using 2 hands, but it will hold an iPhone 7 plus with a thin case. The best way to insert and remove the phone from the bracket is to disconnect the phone holder from the tilt bracket and work on a flat surface so you don’t drop the phone. I use both hands to spread the bracket wide and gently work the 7 plus with slim case into the bracket. It is a tight fit. This bracket is better for phones measuring 2.25-2.5” in width by ¼” thickness (5.5-6.5cm in width x 0.5 cm thick). The problem with Camkix set up is that the phone projects above and behind the plane of the eyepiece and bumps my forehead when mounted with the phone display facing me. Not a problem for a GoPro facing forward. I decided I wanted to use alternate brackets with the Camkix hot shoe accessory. I think a better bracket to hold a 7 plus atop the Camkix hot shoe mount adapter kit is Phone Holder,by Ailun,Phone Tripod Mount Adapter,Compact,Universal for iPhone 7/6/6s,6/6s/7 Plus,SE/5s/5/5c,Samsung Galaxy S8/S7/S7 Edge,S6/S6 Edge,Note 5/4/3 and More Cellphone[Black] Though this one is also all plastic, it uses a screw mechanism to clamp 7 plus sized phones. It is much easier to use than the CamKix bracket and holds my phone securely. It will hold a 2.25-3.5” wide x 3/8” thick (6-7 cm wide x 1cm thick) device. I can mount the entire Ailun Phone Holder directly on the hotshoe to tripod screw or take the Ailun phone bracket and mount it on the Camkix tilt device. Or I can mount the entire Ailun device on the Camkix tilt device. Lots of flexibility in terms of offsetting the phone from the plane of the viewfinder. Easier to use than the spring loaded plastic phone holder that comes with the Camkix kit I also use the Ulanzi iPad Tablet Tripod Mount Adapter Flexible Adjustable Clamp Tablet Holder for iPad Air Pro,Microsoft Surface and Most Tablets (5inch-12inch Screen)Etc. to hold either iPhone or mini tablets to my dSLR hotshoe. I can hold a tablet in the Ulanzi bracket, but the heavier the tablet on the hot shoe, the more unstable the setup is going to be, especially if doing this handheld. The Ulanzi is also all plastic, but is adaptable for holding phones, minitablets, and full sized tablets. Easily adjustable. There are two places which will accept the ¼”-20 threaded screws – one on the bottom, and a rotating adjustable position mount behind the clamp. The rotating part has click stops but has a little wobble making it a little less useful. I use this to hold my iPhone and tablet high above a long lens so the long lens isn’t visible in the video clip. Overall, I’m happy with all 3 devices. They give me the flexibility to decide which set up will be best to hold my iPhone, mini-tablet, Go Pro on the hot-shoe of my dSLR for whatever imaging set up I’m using. Inexpensive compared to spending much more for $80 really right stuff aluminum clamps and $50 manfrotto clamps which only accept ¼”-20 tripod screws without the hotshoe-1/4”-20 screw adapters and tilt devices. Warning: mount this to your SLR hotshoe at your own risk. SLR hotshoes are designed to hold small flashes and not bulky devices like iPhones and iPads.

Good for me :)

I got this to put on my tripod so I didn’t have to hold my own camera I have not used it yet but I’m pretty sure.. it was not expensive so I was not excepting anything perfect.. all I wanted to do is work! And it works :)

It makes a nice handle as well as providing a way to easily ...

I use this with my iPhone 7+. It makes a nice handle as well as providing a way to easily set it on a table, etc. I use a mini tripod, iPhone in landscape orientation, for videos mostly. It can be a little top-heavy on my mini-tripod, but not on account of this product. 7+ is pretty heavy on its own. A regular size tripod should work well. The camera gripper works well - holds the iPhone securely. I would like to have a strap to attach to this holder. Always have a fear of dropping the iPhone.

I am satisfied with the product

I am satisfied with the product. It have all the characterstics that the seller offers. It fits to my tripod. Also it arrived on time.

Using this one for my car.

I'll haft to buy another one because I found another use for this one. I could never find a good phone holder for my car. When I opened the package I knew this would make the perfect phone holder for my car.

As a phone holder, it does its job about ...

As a phone holder, it does its job about right. Holds my phone tight enough, and my phone won't fall down along with the holder. Since I purchased this product, I can watch my Netflix shows on my phone (on a night stand) while I lay on my bed sideways. There is this nail hole on the base of this holder, so if you really want this to stand still forever on your night stand, you can use a screw to pin it down. The only con with this product is that it doesn't has its own screw, so you really have to find one if you want to pin it down.

Great I phone Tripod adopter

This I phone adoptor to Tripod has all the bells and whistles you need , great price Great quality , very well designed and strong materials , I mounted my I phone SE it fits perfectly , portrait and landscape possible with turn of a knob .

Full Reviews