• UV Resistant Materials : environmental materials no waste odor, soft material, smooth tubing, durable, anti sun, not easy to aging.
  • Size: 1/4" micro hose is most-often run from 1/2" drip hose to individual plants with a drip emitter at the end.
  • 82ft Irrigation Tubing:Long enough to watering all your plant in backyard or design your own micro-watering system with some emitters. Extra flexibility for kink-free installation in garden, flower bed, ground cover or other landscaped areas.
  • Widely Usage:This kind of solid poly micro hose is used widely with drip irrigation for main and lateral water lines.Suitable for narrow and tight planting areas.
  • Available for Irrigation Kits: Suitable for The over water pipeline of micro sprinkler, spray irrigation and other micro spray head.

This works well. It pushes into a punched hole in the main line. There is a rectangular tab between the barb and the red screw head. This is used for holding it while screwing or unscrewing the red top to adjust the spray. I just ordered a second bag of 100. When compared to what the Box stores sell, this is a bargain.

These emitters work great. It's easy to adjust the flow from a slow drip up to a 360° streaming output. Of all the parts I have purchased for my drip system, these provide the most bang for the buck!

I bought this to cope with my irritation system, which requires more drippers to work for my garden. It’s very easy to install, and so far it works well, except the water comes out a little slow. It looks like it is more suitable for potting plants but not large garden. The price with 100pcs is a valuable deal.

I ordered two sets to ensure I got enough of the hose. I spent 1 hour setting up one set on my roof to reach 8 plants, so that I can water them automatically and easily from the ground. No problem setting it up and also no problem really to connect the hose with the pieces, a bit of elbow grease helped. It works just fine, although I probably need to run them on minimum setting to avoid overwatering, but YMMV. Recommended.

this Drip Irrigation Kit works very well. easy to install, very good, and effective to water my plants. very easy to use. I add a timer, so it water my plants automatically, nice.

These fit really well and also work very nicely. These come with a lot in one purchase and also the quality is good.

These are basic, easy to install emitters. Given that you pay triple for the same product, I will rather stick with these (even given the claim that they deteriorate in the sun). I can always replace them again.

Yes I receive them packaging was great very impressive I installed 10 of them until I understood how to do it it was rather difficult to pop the hole for them to be installed but nevertheless I did and they work really really great

The previous landscaper installed fixed flow rate compensating drippers on front yard for all plants. Problem with those dripper heads is that they are not all equally made. Some spit out lots of water, others barely have water flowing. Only about half of them emit the right amount of water. During hot summer season, they can't do watering job very well. Some plants are dying quickly in the past. This summer it's happening again. Bought this package of Kingso adjustable emitters, replaced those problematic dripper heads. It's totally different. Very easy to change flow rate with these new emitters, from low to high. They should help plants survive this hot summer. Also this big package is a great value, cost per emitter is minimal compared with those from nursery stores. Usually the emitters should be replaced every couple of years. They will be used up eventually. I'd sincerely recommend this product to friends.