Features:

  • Smraza Acrylic Case fits for Raspberry pi 3 B+ 3 Model B, easy assembly with instructions.
  • 1pc Mini Fan + 3pcs Aluminium heatsinks are included.
  • 59 inch Power Cable w/ switch button - Just Press button to turn on/off your pi, convenient to use.
  • 5V 3A Power Supply - Power for all versions of Raspberry pie and other USB device.
  • Enough mount for pi 3b+/3B/2b ports - Case allow sd card, ribbon cable and other GPIO connectors in.
Great Quality and Worth Every Dollar

I highly recommend to order a case for any Raspberry Pi model but not just ANY case. This case stood out the most for me because of two reasons: (1) It comes with heat-sinks, fan, usb cable, and power supply under a good price and (2) the LONG USB cable has an on/off button on it which is very convenient. When you play on a Raspberry Pi, you’ll find yourself wanting to manually restart so you’ll resort to yanking out the USB wire or plug. With this on/off button, it makes projects less stressful and more convenient to play with! The color of the case itself is very nice and glossy. Overall quality of the material is adequate enough to justify the cost of this item (including extras like the heat-sinks and fan). I would definitely recommend this to any Pi owner!

Better cooling, better access to connectors.

When I learned about the command "vcgencmd measure_temp" I was surprised how hot the machine got, so tried the Performance Pro Active Cooling Case. Yes it cooled, but its closed access to board-top connectors was not wanted. This is my third case; measured temp 68 and higher for no-fan case, in 40's for Performance Pro case, and 31 - 32 centigrade for this case. PLUS it leaves access open to all board-top connectors. You must be careful when assembling case; you will likely break one small part that matters little. Again: assembly requires great care. If you mount fan upside down, it still cools better than Performance Pro. Cooling extends computer chip life.

Great Cooling Case With Added Features!

Amazing case for the price! Everything was packaged neatly and wrapped in bubble wrap. The plastic housing seems to be durable enough, and the nylon screws hold things together well. Only real difficult part was getting the protective film off (try to go at the edge with your finger and rub it a bit), but the overall assembly was simple with the given instructions. The fan runs really quietly even at the 5V speed (haven't tried 3V), so I wouldn't worry about noise issues... will update if the fan breaks anytime soon as I'm leaving it on permanently for pi-hole. The added power switch cable works well too, and the singular button press requires a bit of force in order to turn it on/off so no worries on accidental resets. The included heatsinks are good quality, although the one for the bottom chip is a tad bit bigger than the actual chip itself so just be aware of that. As to whether it keeps the temperature of my Raspberry Pi 3 down... it was running at 118-120F prior to this case (heatsinks on all chips with thermal glue) and now it's running at 80-86F. I'd say that it's doing a great job :)

Perfect

Excellent case. Comes with heat sinks, fan and power supply (with on/off switch). Everything is easy to install. Comes with instructions and the customer service folks are eager to help out. They sent me a video about assembling the case but the printed instructions were easy enough to follow. Nice, tight fit to my raspberry pi 3b. Heat sinks were easy to install, just peel off paper backing and stick to processors. On/off switch is awesome. Really nice feature! Just shutdown normally from OS, wait, then hit power switch. Highly recommended kit from an excellent seller!

The new version is great, and fits perfect.

Let me start off by saying I made a mistake. My previous review was an error made by me, because I purchased it before the rPi3b+ came out apparently, and I didn't realize. Even though I bought it a year ago, I made the mistake, Smraza contacted me, notified me of my mistake, and still sent me replacements. I 100% back this now, because they didn't have to do that. My error came from, I guess the old link, points to the new updated product, and the new page says it fits both. The problem was, I purchased so long ago, that it sat in my tinker drawer and I didn't get around to the project. These guys were stand up about the whole thing, and I wholeheartedly apologize for stating something incorrectly.

Excellent RPi Case for RPi 2,3 Projects

I bought this case to protect my RPi 3 board. I absolutely love the design look of this case. I did not have any difficulty putting the case together. The top and bottom pieces had protective covers to peel off but they came off quite easily. I did have a slight issue where layers 5 and 6 where broken during the shipping process. It was discovered that poor placement of the included power supply shifting during shipping caused these smaller pieces of the case build to snap off. I contacted customer service for Smarza and they went well above and beyond helping me replace the broken parts by sending an entire replacement unit, with additional heat sinks and fan. I would highly recommend this product not just because of the excellent customer service, but also because it is a high quality build that properly and safely secures a RPi 2 or 3 board. The included power supply, heat sinks and fan only further add to the value of this RPi case kit.

Sleek and Good

Pros: -case comes with a power cable with an on/off button (which is important because the Pi does not have one) -case fits perfectly and the fan is just the right size for any over-clocks I want to run that do not completely crash the system. -they changed the design so you only have to peel the protective layer off the top and bottom layers (which is great because it is absolutely horrible to remove) -design looks sleek and does not take up too much foot-space like other cases -design allows airflow but it does not get too dusty inside -power supply provides more than required which is convenient for overclocking Cons: -it can take a while to put together your first time, but once you get the knack of it is relatively simple to take it apart and put it back together Overall: I bought it to make a Retropie as a Christmas gift for my mom and she loves it. Her friends and her actually played it at a new years party this year.

Nice case, great customer service.

A great set. The case was easy to put together (though be very careful installing the 4th level as it is a pretty fragile piece on its own). The instructions are easy to follow and I love that this comes with a fan and 3 heat sinks to help keep the raspberry pi cool. Once the case is together it makes a pretty solid unit and I feel like my raspberry pi is well protected. The smraza customer service was super helpful as well. (We broke the 4th level originally and they were kind enough to replace it for us!)

This is an excellent pack for a raspberry pi

This is an excellent pack for a raspberry pi. The case fits perfectly, looks great, and I love that the chord has an on/off button. The Canakit PSU I bought for my last RPI was a bit of a pain because I always had to unplug it from the wall to turn the Pi all the way off/back on. The major benefit of this kit, for me, is the nearly silent fan. I used the lower voltage wiring and you can't hear the fan from across the room. This is again a huge improvement over another kit that I bought from another manufacturer. If you like the look of this case and want one with a fan and a good power supply, buy it! You will not regret it.

Wow this is great

This little case is great. I like that it comes with a power supply as well. It is a really well designed product. I had no issues assembling the case and they have a great little manual that shows how to assemble it, if you mix up the pieces. The screws are also plastic, so you don't want to use tools to tighten them down. A good finger tightness is plenty, or you will destroy the screw. I do wish there was a way that I could hook up the fan and use all the header pins with a ribbon cable connection, but that really is up to me to figure out. everything fit together really well and securely. My pi is going to be moved around a lot and this case will certainly protect it.

Full Reviews