Features:

  • HEIGHT ADJUSTABLE MONITOR RISER FOR ERGO VIEWING: The height can be adjusted to 2.7, 4.1 and 5.6 inch, rising your screen up to a suitable viewing height, relieving the burdens on your neck and shoulder
  • STURDY & STABLE STAND: This monitor stand is made of MDF platform and ABS plastics legs, it can easily hold up to 44 lbs laptop monitors, printers etc. without wobbling and the surface will not sag within its weight capacity
  • EASY ASSEMBLY & ADJUSTMENT: You just need to add or remove leg segments to install and adjust the height of this stand as you need
  • MULTIFUNCTIONAL DESK: On the desk, there is a multifunctional slot, it can hold your phone and tablet and even pens while removing the slot there is the space for CABLE MANAGEMENT. Under the table, the height is 5.4 inch which can free up space for your papers, cable box and other stuff. PLEASE NOTE the length between the two legs is 11 inch, some keyboards may NOT fit underneath
  • PRODUCT SIZE: Platform- 15.7" * 11"ï¼›Adjustable Height: 2.7", 4.1", 5.6"; Length Underneath: 12.2"
Great!

I'm very satisfied with this product so far. I play far too many PC games and this really helps straighten my neck and back, instead of being hunched over all the time. It also gives a good space for extra storage on my desk. I was nervous about it holding up my monitor since I'm not sure how heavy it is, but I have had absolutely no worries about the strength of this riser - it handles it easily. The set-up was incredibly easy and it doesn't wobble at all. Great product!

Easy adjustment is a great touch.

This is a pretty simply product- but I didn't realize how important the adjustability feature was until I actually got it. I *thought* i knew exactly the height I needed. However, since I switched to a standing desk- my requirement changed a bit and it was great being about to tweak the height to better fit my needs. Also, the little slot in the front turned into great spot for me to put my iPhone! Honestly, Im BAD at returning stuff, so tI probably would have just written this off as not really working for my needs- so nice to be able to make it work!

Very good purchase for my need

I purchased this stand to raise up a hefty large speaker monitor, which is has not had any issues holding reliably. The stand is very quick and simple to put together and seems sturdy enough that I am not worried about it collapsing. A good buy, just wish I had a slightly larger desk

Great value; easy to assembly, very sturdy

I bought this stand to raise my AT&T Uverse equipment up off the floor. AT&T install our TV equipment in our sun room which has developed a leak when it rains real heavy. This stand raises my router and associated gear up about four inches off the floor. Since the stand is plastic, there is no problem sitting on damp carpet. I am amazed at how well built this stand it. I was worried about the legs being loose...but no problem, they fit very snugly. I may be buying more of these to use at work, as well as at home. Very useful stand.

Great for getting monitor to optimal height.

My wife recently bought a Samsung All-In-One computer for her mother. The display tilts, but doesn't raise up and down. I gave my wife a similar product for her laptop several years ago, so I got this for my MIL, because it would hold the AIO's weight, and was less than the one my wife is using. The leg segments go on securely, and come off with some effort. Two segments per leg hold the AIO at the perfect height for my MIL. Also, it opens up some space under the computer for other items, such as an external DVD burner, and a Cellular Modem.

Really Sturdy TV, Monitor, Computer Stand

I'm using this stand to elevate a bedroom TV that is on a dresser in our cabin. It is really simple to put together, is very sturdy and looks nice. I did purchase additional risers to add so it was tall enough for my husband to be able to see over me when we are watching from bed. I liked it so much I bought another one for the guest room TV and used the other half of the extra risers on it.

Sturdy and two for the price of one. I would recommend it to a friend.

This monitor stand, really both of the monitor stands, because you get two of them in the package, really exceeded my expectations I was able to use the extra one for another use that I didn't even remember that I had! Thanks for a great product at a very reasonable price. And of course I really like being able to see my whole monitor rather than three quarters of it behind my laptop, it makes my work much easier!

A Mjolnir 2 amp (runs hot with vacuum tubes) will sit on top of the second platform with nothing above so can easily vent its heat

I am using this monitor stand to stack audiophile components. It is just the right size for my needs. I ordered the dual pack because of the need to stack the audio equipment and give it plenty of head room to vent the heat the equipment generates during normal operation. The legs are each made from three stackable sections that join together tightly and then into the top. I used all three for the bottom platform because I need some arm/hand room to reach the equipment's on/off switches. A Jotunheim solid state headphone amp will sit beneath the 1st platform. A Gungnir DAC (16" x 8 3/4 x 2 1/2) will sit on top of the 1st platform. The second platform for the Mjolnir 2 Headphone Amp requires a small amount of customization as the Gungnir will not fit in the space between the legs. The rear legs of the platform (two sections in each) will actually sit on the Gungnir while the 3-Section front legs will sit on the 1st platform with a 3/4" spacer between the platform and the bottom of the legs so that the second platform is level. A Mjolnir 2 amp (runs hot with vacuum tubes) will sit on top of the second platform with nothing above so can easily vent its heat. I love the flexibility these monitor stands provide. I will make some minor mods 1) I glued some non-slip material to bottom of the legs, and 2) I will drill a screw hole or holes in the bottom of the footer insert for the bottom of the front legs to firmly attach the 3/4" wooden spacer. Making the 3/4 inch high spacer/leveler for the front legs to sit on is a trivial undertaking. So again, the item is well made and easily customizable for different height needs. It saves me a lot of time and the 1st platform is already in use and looking good.

Fabulous!

This monitor stand is fabulous! It is ridiculously easy to put together, looks good, and sits solidly & stably while supporting a 24" computer monitor. I bought this stand over other models because I needed the monitor to sit higher on my desk, wanted the flexibility of the height adjustment in case I get a different type of chair for my desk, and didn't want to spend more than $20. This fit the bill on all counts.

Great Product

Surprisingly, this stand is very stable and sturdy. The actual top portion is much thicker and solid than I had expected and fits my needs just perfect. Having the option to adjust the height to your liking is so convenient. I have some extra plywood lying around and was going to just build myself a stand. Good thing I didn't because I initially anticipated a 5" height, but after trying out the different settings for this stand the height I ended up using is only a few inches, or one section of the legs provided. I also didn't think I'd use the iPhone or mini storage section on the top very much but I actually use it quite often to hold flash drives, pens, or my phone. All around a solid stand and highly recommend.

Full Reviews