• AUTOMATE YOUR HOME/OFFICE: Allows you to turn on & off your A/C, water heaters, pumps, signs, lamps, fans & other appliances automatically during a 24 hr cycle & once programmed,will repeat daily.
  • SIMPLE TO USE: Place ON tripper tab to the desired ON time and OFF tripper tab to the desired OFF time. Rotate dial counter-clockwise until the correct time is indicated by arrow on nameplate.
  • CONVENIENT SCHEDULING AND FEATURES: The timer features multiple on/off setting and is designed with tripper tabs, allowing for a minimum ON time of 20-minutes with a minimum OFF setting of 75 minutes. Dial accommodates up to 12 pairs of on/off tabs.
  • COMPATIBILITY: The timer is compatible with incandescent, compact fluorescent and LED light bulbs. The 120 to 277 dual-voltage timer can replace all single voltage switches.
  • RATINGS: 120/208-277V, 50/60Hz, 40A General Purpose/Resistive, 20A Ballast, 16A Electronic Ballast (LED)/120V, 40A Tungsten. Pilot Duty: 120VAC 1100VA, 240VAC 2000VA. Motor: 120V, 2 HP and 240V, 5 HP.

I have had this unit installed for less than a week, and it is working. I have it connected to a hot water heater, it activates at 1800 hours and turns back off at 2200, and so far the unit has done what it appears to do. I like to think i know a thing or two about anything electrical, however i would not have known what L1 and L2 meant when wiring anything 220 volt. i spoke with a licensed electrician about two weeks ago and he reference thins so I knew what it meant when i went to wire up the device. There is a spot on the timer for a ground however the neutral does not have anywhere to connect it to. This simply means to put a splicer and make it bypass the timer all together. have had no issues working the timer. Great buy for the money

Easy to install and very happy with purchase! There’s a copy of operation instructions on the inside of the removable cover for when you need to adjust the timer. See photo. We’ve used several other models over the years to control turning off and on the outside lights at our horse barn, but this model was by far the easiest to set up. Because of the mechanical design, I also feel it’s more reliable for the long term that the digital models, or those with the plastic tabs you move to the inside or outside of the clock.

Didn’t replace the box in the old one. Just pulled the guts on both and replaced the door with the new wiring legend and away we went.

Replaced a worn out similar device. Works very well!

This is very good product, I used it for my water heater to reduce the electricity bills. Easy to install.

I like this timeclock for commercial use better than base model - as it works for 120 or 208/277v. Simple to install and operate.

Everything I expected!

Came on time and it was exactly what I wanted!