Features:

  • AGGRESSIVE DESIGN - The New Jeep TJ Grill Can give your Jeep an Aggressive Gladiator look! Be different and stand out from the crowd.
  • CONSTRUCTION - Strict Factory QC test, Made of Highest Quality ABS plastic, Superior Durability and Impact Resistance.
  • EASY INSTALLATION - Overlay Cover for Your Stock Grille. Perfectly matches with original mounting holes & light cutouts. No Drilling Required.
  • FINISH - Comes in a unfinished matte black color. Can easily be prepped and painted to color match or customize your TJ.
  • FITMENT - Fit for 1997 - 2006 Jeep Wrangler TJ LJ
Perfect fit

Packaging was great, instructions great, hardware great arrival time was great. All around so good a simple and clean upgrade to change the look of the Jeep. And above all a Great Price. Highly recommend getting one of these Grills.

A grille with attitude...

Beautiful grille. Matte black and would be easy to paint, if desired. I would recommend a professional if you're particular, but you can sip it yourself with a steady hand and quality automotive spraypaint. I decided to leave mine matte and installed it on a 2012 Rubicon. Following the manufacturer's instructions, I reused the Mopar push pins and clips that held the original grille in place. You may need a set of pliers to pry the clips from the original grille, but it's not a complicated removal. Be gentle. If you don't want to use the Mopar parts, Xprite provides clips and push pins. Removing the turn signal housing simply requires squeezing the tabs and popping them out. Reinstall is a reversal of this process, but be sure to know which housing belongs on the driver/passenger sides. These are not parts that can be transferred from side to side. Attaching the Xprite grille to your Jeep is made easier if you line up the clips, then reattach your turn signal wiring harness. After completing that step, simply give the lower portion of the grille a firm push over each clip location, then reinstall your push pins up top. Application of the weather strip was the most delicate part of the install. Ease a portion of the tape from the adhesive side, then in small increments press onto the topside of the grille. I followed a line similar to the original grille.

Easy Install, Looks Great!

It arrived in perfect condition (no brand stamp on the grille). I was able to install it in under 30 minutes. It looks great! What else is there to say? Since this is a new purchase I will update my review should anything change over the next few months. For now it's a 5 star all around.

Looking mean!

Love this grill. Makes my Jeep look like it will devour the cars ahead of it. Very easy to assemble. Wife bought me LED Halo headlights for Christmas (https://www.amazon.com/dp/B01MTXNED5/ref=cm_sw_r_cp_awdb_t1_eVIBAbYGGEQ48) and since I would need to remove the grill to install them I figured I might as well get a cool grill to throw back on. Installation is seriously like 15 minutes. I used all the new push clips that came with grill. Not sure if I'll paint or not, will wait till the weather gets better. We shall see how she looks in summer!

Mean and tough updated look for those older Wranglers!

OK, some Jeep people just hate these, but I got it to keep me interested in my older Jeep. Any Jeep person knows you have to do something weekly to accessorize your ride. This just looks cool and mean and with the addition of the halo eye headlights-it really gets attention. Easy to install...Just add a couple of included bolts along the bottom where it meets the bottom of the original grill-remove that plastic 'JEEP' branded cover thing that has four screws to gain access. Then, add a couple of included bolts on top of the radiator shroud area-or, I just used a couple of body 'push on' type fasteners in those holes on top because of my carpal tunnel inability to grapple with that area. It is on tight and looks great. You might also wish, as I also did, to use some flat black rattle can spray paint on your original grill area so that your original color won't show behind this new grill. That paint is easy to remove later if your change your mind. I may even take this back off and do some paint highlighting like some I've noticed-just Google 'Wrangler gladiator grill paint' and you'll see what I'm talking about. This is well made and flawless, easy to apply, and looks good!

You want an agressive jeep front - this is the best one!

loved the look - wished it didn't have the company name stamped into the top, a removable label Easy swap, there are youtube videos about replacing grills, they are all done the same, pop the top pins, lean forward then pull from bottom, but disconnect the cables to the lights! You'll see box brand and writing impressed on top of grill the same

Sweet Grill!

I got this grill today. I ordered it on Thursday 24 May and today is Wednesday, 30 May. I was looking for a good upgrade from my factory grill that wouldn’t break the bank. This grill has met my expectations. Only drawback is that it doesn’t have a Jeep badge, but that’s not a major problem for me, as I put an American flag-themed Jeep sticker in place of the badge. The grill even works with my new signal lights. Pros: 1. Price is nice. 2. Quality of the material and hardware is great. 3. Comes with all hardware needed for installation. 4. Timely shipping. 5. Super easy installation. Con: No Jeep badge, but not a big deal.

Awesome! But 97 TJ Needs Adjustment

Great Look and great fit. Installed on my 97 Wrangler TJ. However, I needed to cut a section so I could reach my hood latch. I used a Dremel tool. Ended up looking fine after I cut it. I started under the top lip and cut a rectangle to give me more space but not be too obvious.

Looks Awesome!!

Personally this thing looks better in person than in the pictures. Was pretty easy to install, but the bolts up top are tricky. How I did it was wrap the end of my finger with duct tape and pressed the nut on the tape so I could reach with one finger to get to the hole and screw the bolt in. HOWEVER the frame cover behind the bumper does NOT go back on if yours only attaches with the back screws under the grill. From videos the only ones I’ve seen fit are ones that attach to the forward screws near where the bumper mounts. Now as far as overheating issues like I’ve seen some people comment about I can say right now I have no issue. BUT it is winter and colder so the cold may be helping the engine regulate its temperature. Went on a drive going 50 and it was about 48-53 degrees outside so the cold may be helping or those few people having issues may have an underlying problem within their Jeep itself. All in all I think it’s a great product and looks awesome. Takes a little bit to get on but if you’re creative it takes no time at all.

Looks awesome

Fits like a glove on 2017 JK really makes it look alot better. Had to attach the seal a different way the double sided tape didn't hold but other than that great great

Full Reviews