Features:

  • Durable Construction: made of new aluminum with 3/4 inch solid steel, power-coated surface, resist rust and corrosion
  • Enhance the style of your jeep vehicle and allow for easy entry and exit from your Jeep
  • Secure your security and improve your off-road experience; handles are comfortable and non-slip
  • Easy Install: no drilling, no dismantling, bolts right into existing OEM holes
  • Fits for Jeep Wrangler JK JKU Rubicon Sahara Sport 07-17 2 doors & 4 doors
Ok

Product fit as expected but had to use another brand name video to understand install!

Great hand grabs

Install these on my 2010 Jeep 2 door 2 Wrangler. Very secure and and extra help getting in and out. High recommend and easy to install.

You need these for the back seat riders!

Great addition to my wife’s Jeep. A lot easier for her friends to get in back seat. Delivered as promised and secure. Very easy install.

Love them

No issues with them yet.

Nice Handles, check out my review for install tips.

Simple install and they are nice and sturdy! When installing these handles be sure to first apply and tighten the small bracket with the 2 small screws to the handle itself first. There are two bolts in the A pillar that need to be removed prior to install. If you're not sure line up the handles as per the pictures and the bolt locations will reveal themselves. Next take the Midsize bolt and long 1 piece spacer and loosley tighten it to the top bolt opening. Then take the spacer with the ball end and Longest bolt and put it through the bottom opening while holding the small spacer and loosley tighten that into the lower bolt opening. Now fully tighten the top bolt/spacer then fully tighten the Lower bolt/spacers. Apply some Blue Lock Tite on the bolts prior to installation. There are some videos on YouTube for reference. Have fun, good luck!

Need instructions

This was a great buy, except as others have reported, there were no instructions.

Great product

Great product I love having these for people who need extra help geting up into my jKU Thanks!

They look good and are sturdy

Came in as advertised. Packaged well to protect from damage. Only draw back was no instructions and a little fore thought had to go into installation. Took about 10 minutes perside. They look good and are sturdy. Definitely a good buy for the price and a sleek addition.

Easy to install, even without instructions

Shipped and arrived just as promised. I used others pictures to install. Remove bolt at top of pillar on roof and the top bolt on the pillar with a 1/2 inch socket. You will need an extension to get to bolt and crank out. the long screw goes through the round end spacer and the shorter spacer goes in the top hole on pillar; the shorter screw goes through the long spacer and into roof. I barely screwed in the side and then inserted the spacer in the slot on top of handle and hand screwed so I could then crank in with allen wrench.

Removing A post bolt.

If you have a lifted Jeep you need these. Hint: when removing the A post bolt loosen about 4-5 turns then make a half hitch loop with some twine. Place that loop around the bolt put tight. Finish removing the bolt. This will save a ton of time fishing the bolt after you drop it behind the A post trim.

Full Reviews