Features:

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
Good bundle for solderers

Good bundle for solderers. The tool was surprisingly effective (I hadn't used one before so I was skeptical) and is simple to use.

This product does a great job at picking up solder

This product does a great job at picking up solder. It goes well with their solder kit :). Highly recommend if you do house work on other work that requires solder.

Powerful pump, less clogging! Two wicks a bonus!

The suction on this pump is the best i've had. Before this I was using one of the blue stainless steel non-specific pumps and it would clog a lot. So far this pump works about 100% better and clogs way less. Still needs unclogging from time to time but not nearly as often. Doesn't need emptied as often either. I'm actually glad they included two wicks because my wick just ran out as I started my latest project and I didn't have any on order. Overall VERY impressed with the pump and brand.

Outstanding

First I have been an electronics and computer tech since the late 70s When I ordered this desoldering kit I didn't hold much hope for the quality of it, So when it arrived I was surprised at just how solid the quality is. The wick/braid is just what you would expect for braid But the pump unit is first rate for a small manual soldering sucker. All parts are well fitting with no slop and the suction from the plunger is much stronger than I would expect or hope for at this price point. Over the years I have paid much more for just the sucker and gotten all cheap plastic garbage. This unit feels like it will hold together for Many years and hours of usage.

I love this solder sucker

OK, so here's how it works. It has a plunger the moves forward and locks into place. There is a button is the tube and when you place the tip next to the heated solder point you push the button; this causes the plunger to spring back creating the suction. I looked everywhere to find out where the solder is stored, couldn't find anything and I was very discouraged until I pushed the plunger again; out pops the solder, it sucks it up so fast it doesn't glob, I got back this string of solder which I just pulled on and it comes right out. I love this thing, much better than the suction bulb that used to break on my old soldering setup. Highly recommended.

I used this quite a bit and it works great. I half expected to have to disassemble every ...

This item seems solid. The two rubber seals inside work really well. If you put your thumb on the end and push the button the plunger stops half way up and holds the negative pressure until your thumb is released. I used this quite a bit and it works great. I half expected to have to disassemble every few uses to clean it. But it does a pretty good job of self-clearing when you push the plunger down to cock it. Most of the pulled solder gets pushed back out the nozzle. So when you cock it after clearing old solder, do so over a trash can. Overall, very pleased. This was an add-on item for me, and I should have ordered this long ago.

Excellent quality sucker

There's a headline you don't see every day. I was a bit dubious about purchasing this, as I was remembering a cheap, blue Radio Shack model that I had in the 80s, and pretty much expected the same. I was pleasantly surprised to find the sucker to be very well made, with a smooth plunger, comfortable grip, and very good suction. I'm quite happy with it. The included de-soldering braid is wide, flat and very tightly braided, and looks to be good quality as well. Unfortunately, the one situation where I tried to use it was very tight with close-spaced leads, where it simply wasn't the right tool for the job. I expect it will work well in more accessible situations.

Comfortable and effective!

Wow! I was super impressed with this solder sucker! it has been extremely effective, and I have been using it quite a bit. It has strong suction and really gets the solder out of joints. Fits in the hand nicely, is easy to load, and has a nice squishy foam spot to hold onto. I haven't used the wick, as I haven't needed it.

This is all you need for the simple job!

I had some speakers I needed to replace parts on the board. These were perfect to suck the solder off the spots that were needing to be cleaned up. It took me a few tries as it was the very first time I had EVER done this. And the pump worked perfectly. I needed the training, but the pump was true for the needs and I've used it twice since then and I thought it was a one job need. I also now have more solder wick than I'll ever use, but that seems to be the situation for us DIYers.

This Solder Aint Gonna Suck Itself

Impressive little desoldering tool, especially given the price. Nice construction with a solid feel. Comfortable to hold and does a great job picking up solder. The included desoldering braid is a lovely bonus and works well. So far, using this sucker, I've repaired a 50" tv and a computer monitor (capacitor rot on both, ugh), continued work on an antique radio, and cobbled together a couple of little circuit boards. I'm very pleased.

Full Reviews