Features:

  • ERGONOMIC HEADPHONE HOLDER: Easy access to your headphones. Made of a soft, non-abrasive silicone cover with a sturdy internal metal frame, long curved support matches curvature of most headphones.
  • MORE THAN A HEADPHONE HANGER: Multi-purpose hanger. Perfect for headphones and also great for hanging game controllers, cables and other gadgets. (Max total weight ≤ 1kg)
  • CLEAN & ORGANIZED SPACE: Install virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, game consoles, etc. Organize and tidy up your workspace at home and the office.
  • CONVENIENT INSTALLATION: Uses 3M double-sided tape for strong, reliable adhesion on most surfaces.
  • USER TIPS: 1. Clean surface well using provided wipes before attaching.2. Allow 3M adhesive to set for 24 hours before using holder.3. Not suitable for use on wet, greasy or dusty surfaces or on walls with wallpaper.
Easy, sturdy, practical

This headphone holder is applied to the tempered glass side of my PC case, and has given me zero problems. The large contact area means the foam padding of my headset doesn't have indentations like other smaller mounts. The adhesive is quality 3M product, and if you don't know, 3M is *the* leader in adhesives and the like. I would hesitate to affix this hanger to wooden furniture, however, as it would likely remove finish or even wood when removed.

Works fine.

As I stated to the company, I would not attached the adhesive strip to the product, but just include in the box. I didn't want to attached it with that strip, because I was worried that it would take the finish off the side of the desk, if I ever decided to remove it. So, I just attached a couple of Command strips to it, over the strip that was there. It works fine.

Excellent hanger that protects the headphone

I was a little bit worried about using a headphone hanger because I didn't want a stand that would damage the band of my Sennheisers. I was happy when I found this product online because it seemed that the band itself was quite thick, and would distribute the weight of my headphones while. Furthermore, it's made of an excellent material that feels like high-quality rubber. As someone who loves sound and headphones, I feel like this is an excellent product that not only looks great, but will also protect my headphones instead of scratching or damaging them. The hanger itself is quite large - so it might not fit smaller, on-ear headphones, but if you have full-size, audiophile quality cans, this is for you.

Absolutely what I was looking for....

Nice, soft and flexible silicon cover over metal. Wide and curves slightly to prevent the hanger from creating a flat spot on the headband cushion. One thing I wanted to point out, this does have two holes that you can put two screws for a more secure mount. You'll have to push the screws through the silicon but it's not difficult to do. The holes are in the metal so it's really sturdy. you can see the hole location when you look ate the back of the sticky tape. Love this, absolutely perfect!

It could have lasted longer than it did...

I purchased this item on December 13, 2017. As of today, February 6, 2018, the stand has begun to separate from the adhesive. I am disappointed that this accessory has not lasted as long as I thought it would... I had guessed that I would get at least 6 months out of it, considering the brand of adhesive they chose to go with. I was never hard on it, and always took care to place things on it gently. However, despite following all the installation instructions to a T, the adhesive has begun to separate from both the desk it is attached to AND the back of the rubber/plastic hanger. 5/5 for functionality of the stand itself 2/5 for the adhesive durability / duration (original amazon rating 3/5) EDIT: Seller contacted me and sent me an entire replacement unit, free of charge. 10/10 for customer service.

Does it’s job and it’s not too bulky looks great

Working great so far. Love the soft material :) and it does its job so good purchase. Had a little trouble with peeling the adhesion part cause I wasn’t sure if I was supposed to peel the whole thing off (luckily I didn’t). You only pill the first paper layer and then stick it on (you would think that would be obvious but apparently I’m dumb) anywho works great!

Give 3 star because customer services worked with me. (Updated to 5 because they worked with me to get this right)

The idea and product is good but does not stick well at all, customer services worked with me to get replacement to see if it's defective, in the end refund was issued. So if you have solid surface to stick this to, and the headset is light weight then it's a good choice. But something heavier you probably better off with table hanger. My headset dropped and nicked off the paint job, so giving them 3 star for trying to make it work. I can't honestly give 5 star because it didn't work for me. Update: their service continues to follow up with me and refunded me for the purchase. They also provided a new table stand for my trouble. Changed to 5 star because of their great service.

Metal reinforced soft touch covered hook

Nice soft-touch material covering all front areas that would be exposed to your headphones. Wide area for headbands! Attached to a surface with the peel back adhesive: not sure what will happen if/when I try to remove it, it’s quite strong. <—- single use adhesive fyi. I’d buy another for a different wall/vertical location

Best headphone holders

I've bought and used many hooks to hang my headphones as I use different types often. These are designed well. Generously wide. Base that adheres is also large enough to really hold. The adhesive used is strong. I could tell as soon as I applied it to the surface. This, of course, is the most important and lacking in so many others. I got two for two headphones because one of the pairs has large ear muff area and heavier than the others. Does the job. Also the lip curves up a bit to keep from sliding off but not Too high so that it's a hassle to remove the headphones. Well engineered and designed. Highly recommend

If Heaven Had a Headphone Holder

This thing is great! I was worried it wouldn't adhere properly to my metal desk, but it works great! In fact, I've even found myself unintentionally using it as a leg rest. Don't do this yourself, it's not a leg rest, but it's still holding up solid for me, which passes all expectations! I also like the material. It's a very soft rubber with a sturdy spine. May be why I like resting my leg on it. Regardless it's sure to keep your headphones from sliding right off, but also won't damage them. Worth it if you ever find yourself looking for a place to put your headphones, or you just like the aesthetically pleasing, organized look. 5/5 fish from me.

Full Reviews