- CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,Aluminum license plate bracket instead of plastic license plate for more sturdy, NO bending and Long years lifetime. Stainless steel mounting screw, bolt and hardware for Long years, Waterproof.
- Waterproof and Submersible Feature and Testing(2nd Image):We placed light underwater for 3 hour by 3 times each day ,total 5 days,the light worked great underwater! The lights are definitely waterpoof and submersible.Please make sure wires connect correctly and no electronic short before marine/underwater
- Side lens Light and Side marker lights are ALL LED as well ,NOT any incandescent Bulb ! Super bright LED quality ,Complies with DOT standards
- Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc. Please note, these trailer lights are sealed from PCB, not the housings. You may found there are gaping holes in the housings. As the housings are not sealed, there will be water flows in when use in water, and the gaping holes are made for the water to flow out.
- Gound wire ring connect to bolt easily, no need additional ground connection
-
Information
-
Twitter
-
Pinterest
-
Youtube
-
Facebook
Renee Garcia
Have not installed yet
I have not replaced existing lights, the wiring on my boat trailer yet. Everything is there to do the job and the parts look to be good quality. I still haven't decided whether or not to add the yellow side lights, (existing trailer does not have them and the wires run inside a square tube. But it was a good price for what I needed.
Jake Barnes
solid set
directions are a joke. Look on youtube. Installed ithin an hour and they work great! bright!
Lily Irene Morano
Bright lights
This product was really easy to install. Lights are bright. One of the lights came out defective. I e-mailed the company and right away they were able to replace the product. Definitely recommend for a boat trailer.
Chad Boise
work great so far
worked flawless for me. I did not use the splice clips. i used heatshrink wirecrimps i dont trust the clips due to corrosion. lights are bright easy to use easier to install. i replaced all the wire on my boat with the new that way the colors would match up. took me probably 1.5 to 2 hours to replace all 4 lights all the wiring and to heatshrink them together.
Ryan Sammis
Very pleased wires are very sturdy
No issues at all. All lights worked right out the box. Very pleased wires are very sturdy.Marker light came with what looked like wood screws not something you would screw into a metal from, But great product
John Priest
12v LED Submersible Trailer Light Kit.
I quickly installed this set on my boat trailer, sure made a big difference during the day & night time. Good quality lights & wiring I would buy these again. Very pleased of the overall easy application and quality. Wiring is long enough on my 14' trailer. Thanks Amazon.
Kenzie Patton
CABLE CONNECTOR PROBLEM BUT GREAT CZC AUTO CUSTOMER SERVICE
UPDATE: Changed rating to 5 based on the great response from the seller, CZC Auto. They were quick to respond to my issue below and offered to send a free replacement kit. The new kit was shipped and received in 4 days. Great customer service!!!! Definitely recommend this trailer light set!! Original Issue: Bought this light set for my 30' boat trailer. Had to add on extra 6' wire which was no big deal. Finally after 2 days the job was done. Time to test. Turned on lights; tail light and running lights worked great. Left turn signal and brake light worked great. Right turn and brake NOTHING. Checked wiring and found there was no 12v out of the cable connect on the green wire. Verified that there was 12v on the source connector. Bottom line the wire cable connector is defective. THE LIGHTS ARE GREAT AND GET A 5 RATING. THE CABLE HARNESS CRAP AND GETS A 1 RATING!! It appears Amozon has no way to replace a bad component in an order. The only option is to return the whole order. I have too much time invest in the installation so I will buy a cable locally and splice in the connector end to my cable. Not a happy customer!!!!
Libby Cronen
Perfect kit
All good trailer looks like brand new.. remember to gring the paint where you will put your ground connector. Super well done kit, very happy customer.
Chompink Sunshine
Great Light Kit
Needed these to replace old ones on a trailer we were given. They work great, fairly easy installation & the trailer looks like a new one.
Bronson Kittler
Submersible trailer lighting kit with LED's (low amp draw) using marine grade components. A well rounded kit for the price!
Solved the problem I was having with the old lighting that was failing. The LED's are nice and bright. Since they have low amp draw, they have compensated for the possibility that my previous circuit was drawing too much amperage and causing the circuit to fail in some conditions. They function perfectly and though the cases are not sealed (apparently the various parts are sealed), the parts are of higher quality (stainless, aluminum, etc.) for a marine environment. They provided wire nuts and crimp splice connectors to make the connections. I soldered mine instead to insure the best possible service life. Very happy with these and my trailer that now functions as it should and had never done so reliably before in the 5 or so years that I've owned it.