Features:

  • šŸŽ„PRODUCT PARAMETERS -- ultrasonic power: 60w; heating power: 50w; capacity 1.3 liters; temperature setting range: 0-80ā„ƒ (0-176ā„‰ļ¼‰, time setting range: 1 - 30 minutes
  • šŸŽ„Material:Made Of Excellent Stainless Steel, Sturdy, Anti-Corrosion, Rust-Proof And No Water Leakage For Longer Service Time.
  • šŸŽ„STAINLESS STEEL CLEANING BASKET - ultrasonic gun cleaner Cleans small objects that require less friction, reduces friction between small objects and the water tank, and extends the life of the ultrasonic cleaner
  • šŸŽ„EASY TO OPERATE - After connecting the power supply, simply set the cleaning time and temperature setting time, then press the switch button, the work indicator will light up and start cleaning
  • šŸŽ„APPLICATION -Our digital ultrasonic cleaner is used to clean dirt, oil and bacteria that are difficult to peel off in metal products. Suitable for cleaning electronic tools, jewelry, glasses, dental equipment, etc. Widely used in services, electronics, pharmaceuticals, machinery, chemicals and many other fields
Five Stars

works very well in our orthodontic practice. Larger than those available from dental suppliers and less expensive as well.

Great for Reloaders

Used to clean 223 rifle brass. Ran around 200 cases for an hour at 50 degrees, then put them in the oven to dry them off. Did a great job on the primer pockets, and the brass looks brand new on the inside and out. They're not super high polish, but definately cleaner than they were. Great for using with random range brass that you pick up off the ground. I bought the 3L size.

Works great, Small glitch

Works as expected, alittle bummed out on the heat control it doesn't heat unless the sonic is running

Nice unit, big cavity, good simple controls.

Just arrived today, and I put it to work immediately. Seems to be effective and nicely made. Note that the cover rattles when the transducers are on. So - simple solution was to put a small vinyl self-stick dot on each corner of the cover. Worked like a charm. Cavity is large enough to clean an old clock movement, which i'll do soon. Update - cleaned some HVLP spray gun parts that had dried waterborne lacquer on them. I put 4 liters of Zep orange cleaner in, heated the tank to 50 deg C, and ran a couple of cycles of 30 minutes each. Worked well to remove the lacquer. Then cleaned some spray gun parts that had still damp WB lacquer on them. Did a really nice job clearing the tiny air holes and channels in the air cap. If this item lasts for a while, I'd say it is a really good buy.

During Cleaning, the "ZiZi" noise is normal, do not use while bathing...

Ok, bought this unit to replace a failed HF usound that lasted less than a month. This one has balls. So far, so good. Used 1/3 simple green w hot water..the usound transducer is much more powerfull (and noisier) than the HF..you can literally watch crud dissolving off whatever you are cleanin...last night I threw in a gold chain, sockets, ratchets, hand tools etc...and boy howdy they got clean...My main use for this is outboard engine carbs, so will see how well and how long it lasts. The basket is nice, and the large capacity is the bomb..should be able to submerge most average carbs entirely. Also, the ball valve drain is a nice feature. Now it's a loud and heavy unit, but I'm using it in a shop building so that is not a concern. As far as durability go's, well I will have to see how long this unit lasts. Initial use is A-one. On a humorous note, I literally was reading the user manual out loud to my beer drinking buddies, as the obvious google translate from chinese was "no speakee ingle" too good...and I quote from the manual" Left "temp+" and "temp-" is temperature set button, Press them can set heat temperature; if you want heat, please press the left "on/off" button...When the item is smeary of extraordinary dirty. Please add 5-10ml of detergent into water to enhance cleaning result." Hilarious... Warranty?? no clue, nothing stated in the manual...but Amazon has been pretty good about past items that died..will see. Todays mission is to re usound 3 yamaha carbs from an outboard that sat for six years...there are some very small passageways and orifices that I think the usound cleaner will prevail upon....Using water based yamaha carb cleaner dip. I wouldn't use any flammable solvents in the unit with heat, although I have heard of folks doing so in a secondary container (jar, tupperware, ziplock etc..) Keeping my fingers crossed that the Zi Zi noise continues and this unit lasts a while... Update 9/7/18 the heat indication light died after only a few hours of use, the heater element still works..will see how long she lasts there's vary vague 60 day warranty thru the manufacturer's website. you could probably fabricate a finer screen tray out of aluminum or stainless screen for small parts...or put small parts in a tupperware container...also may be a decent idea to put a screen on the drain hole so a small part couldn't get lodged in there...

Good Quality Product.

Nice big tank and a parts basket. My only complaint is that the temp is Celsius not Fahrenheit. It does such a nice job even cleaning glass pipes.

The ultrasonics are extremely strong-Love it!

I just got this and used it twice already. I wish I had time for a video review but in lieu of...this thing is AWSOME!!! The vids below donā€™t do it justice. Arrived in 4 days. Always get one size bigger than you think you need. I was gonna get the 3L and then at last minute got the 6.5 and Iā€™m glad I did. The vibrations are so strong that it feels like itā€™s shocking you when you dip your hand in. For U funny folks saying you idiot it was! No it wasnā€™t because I want to keep it clean so I put put my harsh carb cleaner in a pickle jar and only water in the unit. As soon as I dipped the jar in, the vibrations immediately transmitted up to the rim of the jar where I was holding it and again felt like it was shocking me and the last time I checked glass does not transmit electricity. Let me tell you the grease and gunk just melted off the parts. I also tried the cleaner and parts in a freezer bag and that worked great too. You could see the top of the cleaner surface dancing and actually creating droplets about 1/2ā€ to 3/4ā€ above the surface inside the bag it so strong. The 6.5L also has the drain valve which is very helpful when cleaning up. The heat and timer worked perfect. The packaging was so good, I just put it back in it after using. This is not HF quality...I definitely put it well beyond that to commercial grade quality.

Mophorn Ultrasonic Cleaner is AMAZING!!!!

I don't believe in giving reviews right after you purchase a product form Amazon. However, It has been close to 3 months and this Mophorn Ultrasonic Cleaner is beyond amazing. It works!! I purchased this machine so I can clean the un-cured resin from my 3D printed models. And it just works great. I can't tell you how satisfied I am with the quality of my 3D prints and how clean they come out with the help of Mophorn Ultrasonic Cleaner. Now where it really shined! My wife two weeks ago bough down our Precious Moment's Figurines from the top of our Kitchen cabinets. They were just dirty and disgusting.. Cathy said " I tried cleaning them with all our cleaners and the stuff wont come off." , "Do you want to just thrown them away?" I said hold on a sec let me try one last thing. I put the 15 Year Old dirty Precious Moments statues inside the ultrasonic cleaner for 5 minutes. Pulled them out and just wiped them down. THEY ARE LIKE NEW! My wife was shocked I was shocked.. This thing is amazing! I cleaned 15 of them for her and now they look fabulous! I highly recommend the Mophorn Ultrasonic Cleaner. I have it filled up with 70% Isopropyl Rubbing Alcohol, Unscented. I keep the cover on so the alcohol doesn't evaporate. This thing is like magic. It also is really good build quality. I'm very happy with the cleaner and you will be as well.. Rene Hasprunar Ringwood, NJ

Was it used!!!!

****Update***** (updated from 3stars) was contacted directly from the China supplyer/destributer via email about my concerns of this being used. At least they are monitoring the reviews here. They assured me it was not and I have used it about 3 times so far. So far so good, it is still working. The China supplier/destibutor also gave me a discount refunded to my card for my concerns. I still have the slightly rusted ball valve but this does not seem to be an issue for operation. Will update again as I use it more aggressively. Just recieved my 22L cleaner that has the model name of Vevor. If you look at the pictures it sure looks like this is a used unit. The ball valve is rusty and there are stain Mark's in the tank. The lid still had the blue film to protect the metal but the tank part is suspect. It is working, and will update stars when I use it more. Curious to know if anyone else has seen this in their tanks when purchased.

Recommend this over a non-commercial unit - definately worth the extra money

Works great for cleaning firearms. I was going to purchase a smaller, non-commercial ultrasonic device for just a little less. But, instead decided to go with the commercial unit, and glad that I did. This has metal tank and basket, not a cheap plastic unit. The only think I need to get is a hose that fits the drain, so that I do not have to carry it to the sink to drain.

Full Reviews