Features:

  • REPLACEMENT HVAC BLOWER MOTOR RESISTOR - Controls the fan speed in your AC and heating system. If you can no longer adjust the air speed with your AC controls or your air conditioner system no longer blows chances are you need a new Blower Motor Resistor.
  • FITS THE FOLLOWING VEHICLES - 2008 - 2012 Ford Escape | 2007 - 2017 Ford Expedition | 2004 - 2014 Ford F-150 | 2008 - 2010 Ford F-250, 350, 450, 550 Super Duty | 2006 - 2008 Lincoln Mark LT | 2008 - 2011 Mercury Mariner | And More, SEE BELOW for all vehicles.
  • REPLACES PART# - 3F2Z18591AA, YH1715, 973-444 - Easily installs into your AC blower motor. Simply remove the screws that secure the blower motor resistor into the blower, remove the resistor assembly, and install the new resistor in place.
  • OEM, FIT, QUALITY, FINISH - While this is NOT a genuine Ford, Mercury or Lincoln part, it is a direct replacement. Only fits models with MANUAL AC controls. Fits various model years including 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17.
  • LIFETIME WARRANTY - This HVAC Blower Fan Motor Resister comes complete with a Lifetime Warranty. If the resistor ever fails on your Ford F 150, Lincoln Mark LT, Mercury Mariner or other vehicle simply contact us for a replacement.
Good product! You can fix this!

Really liked the price from ordering this product through Amazon. It cost half the price. Fast delivery. I was able to install it easily and now the blower fan is working great again. I have three old Fords (two Escapes and a F-150). All are older vehicles with high mileage. Each has now required a new blower resistor. Ordering these and installing them myself saved me a bundle of money. Access under the dash is a little tight, but the install is simple. Instructions on YouTube. Good product. All the blower fans in my vehicles are working great now.

Great seller, great product

Fixed my problem of fan speeds not working appropriately, the first one they sent me did not work on all fan speeds but they sent me another free of charge when I contacted them about it. Just make sure you have manual AC controls if you are looking to buy this product.

2009 Ford Escape Had 1 Fan Speed

Installed in 20 minutes on my 2009 Ford Escape! You have to be flexible and have a short handled ratchet, but it was pretty easy. You should detach the cable first to better access the screws, and there is some piece of plastic that sticks up that makes accessing one of the screws difficult, also a second person to hold the flashlight would be good too. First time working on my car. This company provides a lifetime warranty! Recommend "FordTechMakeULoco" and "MichaelAdamsRocks" for great instructions.

Great service and the right part!

Product worked as expected, nice to have heat without it being stuck on high. Although I did not need it I was very impressed with the service offered by the seller. Willing to supply information from the service manual as well as tech support!!! Would buy again from this seller in a heartbeat!! Thank you

Happy Wife

When wife complains about 1 speed on her vehicle it's time to replace BMR. This BMR fixed the problem. Good quality and fairly ease to replace, if you have mechanical ability. Happy Wife Happy Life.

Fast Job

Took about 15 minutes and a 5/16 socket and eyes in the end of your fingers to change. Restored all 4 speeds.

Solved my blower issue! I now have 1, 2, 3 and 4 Speeds :)

I had no idea this was a thing - when I bought the car many years ago, 1 on the fan control didnt work, then a few years later 2 went. Over the weekend 3 went too - so I looked into this on youtube. Found this as the fix! It worked! YAY! New is on the left :)

Does the trick

Pretty easy to install, just had to disconnect and remove two hex screws for the old one and install the new. It's on the passenger side near the kick panel. Now the blower works on all speeds.

Work like a charm 2004 Ford F-150

Installed this two days ago. The hardest part was getting to the two screws to get the old one out and put the new one in. The part is really located in an awkward spot. I found going through the glove compartment helped a little, but still tough to reach the far screw. Once it's out, replace the part and put it back in and screw it ...all done. Now ALL fan speeds work.

Worked like it should

This was a great purchase. Easy to install two screws. My fan only ran on #3 and #4. Number 1 and 2 did not work this did the trick. I probably saved 200.00 ...I’m sure the dealership would have charged me. Took probably 10 minutes. Very happy with the purchase!!

Full Reviews