Features:

  • IPR air test fitting tool perfectly fit with ford 6.0L powerstroke diesel high pressure oil system
  • NO Scan tool or IPR driver tool is required - potentially lower tool investment
  • Leaks of ANY size can be detected - because the IPR valve is removed from the system the fact that it never closes 100% and thus creates a distracting air noise during testing becomes a non-issue. In fact, it is possible to pressurize a system with shop air, trap the air, and leave it pressurized overnight.
  • No vehicle required - engine builders can quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult
  • Allows systems with the latest updated standpipes to be tested.
Five Stars

The part is great... safe lots of work! Thanks

Good product

It fit my 6.0 and is working very well.

Good tool for u tool box

Good tool for u tool box if u work on ford diesel engines

Worked like a charm

Worked like a charm!! Granted you have the get you own 3/8” air hose, ball valve, and fittings but still A LOT cheaper than the $100.00 plus being ask for this part from all diesel sites.

No complaints

Arrived on time. Worked as expected.

Perfect fit!

I was able to diagnose a bad oil pump in about 10 seconds after installation. If you plan to pull your tubro buy a 90% air elbow or a short air fitting so this will fit 03-04.5 old style pump without clearance issues. If you don't have a large leak that shows up right away make sure to leave the system pressurized for awhile so all the oil works out of the system so you can hear the small leaks.

worked great

worked great on my 2007

Five Stars

This worked great. Recommend this product if you think you have a high pressure oil leak

Full Reviews