Features:

  • 🔵 Heavy Duty 11-4/5” Inch Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life
  • 🔵 Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools
  • 🔵 Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inch threaded rods for 10-inch to 10.5-inch maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)
  • 🔵 Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice.
  • 🔵 Orion Motor Tech pursue outstanding quality and 2-YEAR WARRANTY service, only have point of departure, there is no terminal point. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. 1.Go to your amazon account and find the order. 2.Click the seller name and enter the store page. 3.Click "Ask a question"
Gets the job done

It securely compresses the spring. Use an impact wrench to turn makes it much easier.

Good quality for the price

Work great, I was worried they would strip or shear under pressure of impact wrench but nope, good stuff for the price.

Well built

Well built product for a reasonable price

Five Stars

Better than I thought

Spring replacement

The tool work very well....was used to remove coil spring from strut and installed a new coil spring. Very happy

Great spring compressor

Worked great on replacing my struts. If you plan on doing the job more than once, these are worth the investment. I like that you can use a1/2” extension as well.

Five Stars

worked perfect for my RZR springs, not a bad price either

Well machined. Easy to position. Very stable during use.

These allowed me to save several hundred dollars, by letting me compress the rear springs and replacing the broken rear upper strut mounts on my Subaru. They were easy to position on the coils of the springs and held their grip as they were tightened. I used two socket wrenches inserted into the top of each tool. By alternately tightening each socket wrench 3 or 4 turns, the tools compressed the spring evenly and did not slip or move around on the coils. The sliding pins easily went over the coils, and provided an extra measure of safety. The instructions also recommended dropping some motor oil on the screw threads of each, to make tightening them smooth and easy. Did that, and the job was done quickly and well.

Five Stars

works great and safety pins are nice

Full Reviews