Features:

  • Tire: 11x4. 00-5 flat free Smooth Tread - check your existing tire Sidewall for tire, hub and bushing size to ensure proper replacement fit.
  • Wheel: solid Black Steel, 3. 4" Centered hub, 3/4" Sintered iron bushings
  • Universal adapter kit includes: 2 - 5/8" Sintered iron bushings, 2 - 1/2" Nylon Spacers, 2 - 1/4" Nylon Spacers, 2 - steel washers
  • Use: replacement for front mower tires 11x4. 00-5. Not for highway speeds
  • Low hassle solution to repair or replace your mower tires
Nice tires

Every zero turn mower I've had always had problems with the front tires. Makes more sense to go to solid tires inplace of inflatables.

Very very very round!!

So nice. Perfect fit on craftsman ztr.. After extensive use of this wheel I am so happy with the purchase. Great fit plenty of spacers to make the right fit on the axles. Very round pretty hard but have learned to love the consistency of the wheels. Will buy this type from now on great purchase. Keeping them greased and loving every minute. I cut 7 yards a day..

Great Value

This was the 4th set of wheels I tried for my field and brushmower and they work perfect on the deck front. The quality is far better than the others I tried and, strangely, the price was the best. I'm very satisfied and quite surprised by some of the negative reviews. The quality for the money is excellent. I had NO problems with the bushings or grease fittings.

FIT MY CUBCADET RTZ 42 ZERO TURN

I have an rtz cub cadet mower (42’’) this tire fit perfect using the 2 black adapters NOTE*** if replacing it I’d recommend buying 2 because these are much bigger than the stock tire

Love these tires

Cost effective, long lasting. They are better than pneumatic tires for lawn work. EG: No FLATS!

Worked perfectly on Hustler Sport

These worked perfectly on a Hustler Sport using the spacers. I might add a second regular flat washer as there's just a little play but they worked fine out of the box. It worked perfectly w/ the 3/4" hub diameter, pull the 5/8" bushing out of the Hustler wheels and they slide right in these, they also work well too hold the spacers on while you reassemble too. The zerks were in tact on mine and took grease fine, but even if you have to replace them w/ a new one for $0.35 from the hardware store you can't go wrong. I looked at the ones w/ the 5" long hubs and thought about cutting them but this is so much easier, hopefully the plastic spacers hold up. The ride is probably a bit rougher but I was getting sick of airing up the tires. I'd replaced the tires and even put tubes in them and still getting flats. Unless you're mowing in a prairie dog village the slightly rougher ride is WELL worth the convenience. I've only mowed a handful of times with them so it remains to be seen how well they hold up but so far so good!

Works great on my Ariens Ikon X series

Installation was easy and it was a great fit for my Ariens Ikon X series. No issues with the wheel and it is very sturdy.

Great price for a great product !

After constantly fighting to keep at least one of the front tires on my Cub Cadet ZRT 50 on the rim for at least 8 years I finally decided to try a set of solid core tires. After a lot of research I decided to give these a try. Price was great. They came with plenty of spacers and washers to get a good fit. I saw some reviews about the poor quality of the grease fittings. I was a little hesitant but decide to try them out. Had no problems at all with the zirc fittings. Nice and tight and the units greased right up with no problems. The ride may be a tad bit stiffer than the originals but not too bad. I cut about 2 acres and my yard is pretty bumpy and by no means flat anyway. Been using them a couple moths and couldnt be happier.

Just as expected. Great!

Easy to install. Fits Toro Trimcutter zero-turn mover. Can be adjusted to fit with fitting pieces that come with it.

Replacement Tires

I used these on my Cubcadet Zero Turn. They are slighly large than the original inflated tires and the ride is much firmer but they are very durable.

Full Reviews