Features:

  • ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design with spring-loaded legs for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.
  • INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!
  • COMMON APPLICATIONS: This set can be used with a variety of Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile cars, SUVs, vans, and pickup trucks.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES harmonic balancer puller set set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
Great puller

Very nice puller used it first on a 2002 Dodge Stratus 2.7 V6 work perfect. A+

Nice quality nice case Work’s perfectly

Used this on a chipper to get the flywheel off and it worked perfectly

Removes ‘07 Corvette LS2 Harmonic Balancer

This tool was an absolute perfect fit. I tried other pullers that kept slipping off the wall of balancer of my ‘07 Corvette’s LS2 . With a previous review’s confidence did I buy this. If you’re changing a balancer on this engine, this is your tool. One attempt, done in 45 seconds.

Excellent tool!

I bought this to do the oil pump on my 6.2 and was a little hesitant due to the price. I’m a professional mechanic and I’m used to using Mac, Matco and Snap On tools at work. I needed this for home and the others were more than I wanted to spend for something at home. Don’t let the price scare you, this is a QUALITY tool! Quality I would expect from one of the three mentioned above. Worked like it was supposed too, perfectly! These LS motors can be very hard to remove the balancer from. “Cheap” tools can’t handle removing them, they’re just too tight. This one worked excellent! Never slipped off, good quality threads on the center portion. Threads are nice and tight, like they should be. You can drive it with either a 3/4 wrench, 3/4 socket, or (and this is where this tool beats the big three) a 3/8 ratchet alone. Located on the end of the threaded rod is a 3/8 female receiver for your ratchet. I can’t tell you how nice that is. The case is a standard blow-molded plastic case but holds the tool nicely. One thing I recommend, get you a tube of extreme pressure grease and grease the threads. Makes tools like these work so much easier, besides protecting the threads. I use the Quicksilver extreme pressure grease. It’s the best I have found so far. Thank you for a quality American made tool at such a reasonable price!

Trailblazer i6 Puller W/Some Mods

If you grind off 1/8 from the tip of the hook and the end of the hook this will work for 1st generation Trailblazer's instead of the 200 dollar puller GM wants you to use. Nice solid tool. Push rods ensure you don't trash the crank threads. Changed my harmonic balancer without removing the radiator.

I am Impressed. Very High Quality Profesessional Grade tool for a very good price.

This is actually a really really nice puller set. I am very impressed with the quality. The threads in the middle are 3 times as deep as other pullers i have used. The threads are allow very fine which give you more contact, leverage which equals strength and pulling power. It is definitely built to take some abuse. It has a really nice push pin setup to release the hooks and flip them over for Chrysler 2.4 pulleys. The case that it comes with holds the tool perfectly while being very compact so it doesn't take to much space in the toolbox. I can't believe the quality of this thing for the price.

Don’t Miss This Puller. Very Nice, Great Price

How did they do it? I mean put out such a great little puller for such a reasonable price! The tool works like a charm. I had my doubts about its material quality and craftsmanship but I was pleasantly surprised and bout accounts. With a little grease on the threads it worked as smooth as could be. The three fingers could use a spring mechanism to keep the taut and in place however with some cardboard pieces you can get it to stay in place until you apply pulling pressure. A nice color, red, with a case too! You can’t go wrong.

Works for Mazda CX9

Works for Mazda CX9 and Ford edge with 3.7 and 3.5 engine. Works in tight spaces and the pins slide out to remove the arms in case it's difficult to remove from a tight space, you just disassemble it and remove it. To use it start with the smallest rod in the kit and move up as needed to the next size. Was easy to use and was very effective in removing the pulley, it took maybe a couple of minutes if that. This tool works great!

Well Built!

Received my puller super fast! I was totally shocked! Came in a nice simple carrying case. Puller itself has some weight to it. I thought the arms were aluminum based on the anodized look but they are steel. I used it the day i got it and worked like a charm on a GM 5.3L. I recomend putting some grease or antisneeze on the threads to keep from gaulding them and NOT USING AN IMPACT! I see a lot of people using air impacts on them but every tool i have used an air impact on has destroyed the tool.

Correct tool for the job!

I needed to remove the harmonic balancer on my 2001 Dodge but the local O'Reilly Auto Parts store did not have the correct style puller. Went to Amazon and looked over the selection of pullers and opted for the ARES. The price was right at $32+ and it was delivered less than 24 hours after I placed my order - on a Sunday, too! I removed the balancer in about 3 minutes total. O'Reilly's lists the same type of puller on their website but it costs $120.00.

Full Reviews