• Full Metal Exterior Design. Clean interior –PSU Cover & HDDs. Tempered Glass Panel. Unique exterior design with integrated PSU cover
  • Fully Equipped with Magnetic Dust Filter. Long GPU (supports up to 15.2in). Full Size PSU support. Equipped with 1x Phanteks 120mm Fans Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset)
  • RGB Power Light + Ambient Down Light (10 colors). Integrated RGB Illumination modes + sync with RGB motherboards/Phanteks RGB products. High Airflow
  • 2x Front Loaded 3.5" HDD. Supports up to 240/280mm radiator in front. 2x SSD mounting location (1x included)
  • Motherboard Support: ATX, uATX, mITX, (E-ATX* - up to 275mm wide). Graphic card: 330 mm/13 in. CPU cooler: 160 mm/6.3 in. Cable management: 35 mm/1.4 in. PSU(including cable): 197 mm/7.7 in

First let me start by saying great value for the buck. You won’t find this quality for a budget case. The NZXT H500 is the closest case between the two I would recommend anyone looking at either case you are going to be happy. Offers easy accessible access to all sides. Encourages cable management. No sharp edges which can be found on most budget cases not here. LED power bottom and accent great feature. Exterior construction no cheap plastic on exterior panels. The white color stands out for my taste. Let me tell you the issues not all cases are perfect and certainly this case did cut corners. 1. The hard drive caddy located in front of the power supply. Hard to access especially routing all the connections. 2. Air intake in the front is choked if you don’t get a quality case fan. 3. Fans you only get one and trust me you need airflow in this enclosure plan on installing more. That is it other than that check out my rig plenty of room for anyone that want to highlight there hardware.

Pros: Top notch construction with Tempered glass. Good spacing behind the back panel and good amount of cable tie points. Cons: Unnecessary bracket to access expansion card slots (minor gripe), 280 mm radiator support is kind of joke ( I have one of the slimiest radiator from corsair - H115i Pro and I had to install fan in push config in order to fit the radiator). I highly recommend this product for the price.

I bought this case to replace my termaltake versa n21, and it was a good buy! Pros. it looks cool it’s easy to build in it has good airflow there is lots of room for cable management and it has tempered glass! Cons. None for me! Overall it’s a a great case, and I would definitely recommend this to anyone who is building their first PC or just anyone looking for a good case!

I bought this case for a htpc. After seeing how good it is, I think I should really put something more powerful in there. You can add a 280mm radiator on the front which is amazing for how compact it is. The integrated lights are a nice addition and I see myself buying a fan that can also change lights color in the future to use it with this guy. The dust filter on the top is as basic and good as they come. The cable management is good as it is hidden at the bottom of the case and all of the cable straps come with the case. The bad things of this case are minimal. First, if I had not watched videos on youtube, I would not have easily figured out that you have to remove the front of the case in order to get the access to the hdd cages. And also, you need to make sure that your PSU is not too long or the cables will be too close to the hard drive cage and push it forward. I was using spare parts so I had to cram all the cables between the PSU and HDD cage and then do the cable management. The PSU is hidden in the bottom and is nowhere to be seen through the tempered glass so it looks like I'm a pro (which I'm not). That's another strong point of this case. All things considered, you won't be getting something this good for this price from any other brand.

case is great for the money, the glass side is well put on and alot better than plastic. steel is a decent gauge will be workable/weldable for future mods. note the standoffs installed already dont fit standerd mobo screws i almost stripped one till i looked at the box of screws. the only things that sucked with this case was my on-board heat sink was to big to mount my 140mm rad on top so im blowing hot air in the case from the front and obviously theres no room for a 5.25 drive other than that it not a bad case and i been looking to get rid of my bulky level 10 gt. everything fit good including my 1060 turbo gpu. the one thing with this case is its mostly metal so use fan screw bushings or something or itll hum like mines doing till they get here... the case has a connection for phateks leds to work with the side led too but they are limited settings so ill use regular rgb strips. and this will fit a atx board tight but fits.. also theres room for 2 ssd's on the back side witch was a huge plus to me as i already had to get rid of one storage hdd. this case is a good deal for $60

I wanted the SMALLEST case for my ATX motherboard. My options for ANYTHING smaller were over 4 times the price. I love the build quality and I’m very glad I made this buy. My ASUS Strix GTX 1080 fits with room between my front mounted fans. Noise level is contained quite well, as noticed when removing the beautiful tempered glass side panel. My large hands fit well into every area and I never felt like the chassis was cheap or that corners were cut. Large, oversized cases belong with the 2000’s. Bring your setup into 2019 with this small, sleek case that brings compact size and a touch of class to your setup.

This is an excellent case. Very sleek with lots of room. The tempered glass is an absolute win. Cons: Front airflow is very limited. I have two 120mm exaust fans in the back, and two 140mm intake fans in the front, but I still have negative air pressure in the case. The back of the case is ugly, but its not like you see it much. Pros: Plenty of space for cable management and even for some closed loop radiators. Beautiful tempered glass and PSU enclosure. RGB lighting controls. Absolutely the best case for the price point.

TL;DR- Buy it already Great compact budget case with more than workable airflow, great cable management and understated looks. I bought this case to replace the one that came with my prebuilt PC. I wanted something that would allow for better airflow, more efficient use of space, and classier, more understated looks. When the case arrived, I began the process of rebuilding my PC in it. The building experience was very easy, with the cable management being very easy using both the large power supply basement and the cable routing channels. As you can see from the photos, I was able to fit a 240mm AIO in the front to cool my OCd i7 6700 and a 120mm AIO in the rear to cool my GTX 1070. Thermals are better than in my old case, and fan noise is more than tolerable. The integrated RGB controller also allows the intuitive control of Phanteks RGB strips (of which I have one) or the ability to turn off the lights entirely. The power button is nice and tactile, and the RGB lighting surrounding it is a nice touch. Dust filters on the front and top allows for me to occupy all fan slots without having to worry about the case getting furry.

I bought and transferred my my PC into this case. I love the case it self and the entire build was simple quick and clean. My only gripe isn't with the case but with the packaging. The hard foam as a bug bear to unbox and may not have taken shipping so well. The space between the box side and the tempered glass panel was more ample so that what ever had punctured the side did not touch the tempered glass. Eventually Phanteks will make a product i cannot give 5 stars. Things to note is that Air Flow is limited for an A.I.O. I would strongly say this is a good air cool case and if you are gonna use an A.I.O get fans that can move air at a high rate or very decent static pressure fans. (XSPC 120mm 4 pack for $26.00 is my recommendation.) The rear fans is a lot better than I first thought. Moves a decent amount of air but cannot be counted on to do the entire case. Noise levels are what you make them but the case is not sound proof so be sure you set up for sound in mind of your a silence freak. My last point is the looks. SEXY A F. Job done. I give this case a solid buy to anyone who needs a $60.00 case and don't wanna hassle with extras. Oh yeah. Tempered Glass at $60.00!!!!