Features:

  • ✔Use to seal pipes, fix leaks in tanks and drains, repair appliances, tools, furniture, toys, automotive parts, pools and cracks in concrete.
  • ✔Bonds to a range of materials, including metal, wood, glass, ceramic, fiberglass, stone, marble and many rigid plastics.
  • ✔Easy to use: Simply cut, hand knead until color become uniform and apply to damaged area then all you do is let It dry.
  • ✔0-10 minutes: mixing time, finish kneading and using. 10-60 minutes: curing time, hardness increased rapidly. After 12 hours: fully hardened, permanently fixed.
  • ✔Please use within a year, after use can be permanently fixed. If you have any questions, welcome to contact us, we will reply to you at the first time.
Got the job done

Seems to get the job done just fine. Easy to use, whether you’re familiar with these types of putties or not. To use, take it out, guesstimate the size you need and cut off a piece using a razor blade (prepare to have some left over). I recommend approx. half inch to 3/4 to start with. Roll it into a ball in your hands to warm it and mix the 2 solutions together thoroughly. Mix until soft & uniform using your palms and fingers. Then apply to area you need it on. You will not need much, but use your judgment. Shape it as needed with your fingers, x-acto knife or sculpting knife. Attach whatever part you need it attached too, or otherwise let try completely. If you attach something to it, hold it tight together by hand or with a weight for at least 5 to 10 min... I give it an hour even though it only needs a few minutes for it to fully harden. Then, if need be, sand it down a bit. Then you’re free to paint directly over it to match the product you have added it to.

Epoxy Putty Stick, Yanyi Moldable Epoxy Glue

This Putty Stick glue worked perfectly. I have used a nearly identical product maybe five years ago. Both have been very satisfactory. Just work the putty as directed, then it is like play putty, which can be molded into the shape desired, then stick on the surface to be repaired or sealed. You have plenty of time to work the putty before it sets up. When it does set up, in about 30 minutes, it becomes quite hard and durable. The first time I used such a product was to seal a hole in PVC piping, which was a main water pipe underground, which would have been difficult to repair/seal otherwise. It was very easy to use and has lasted for years.

One down, one more to go

I bought this to repair 2 garden statues, the first slightly chipped, the second split nearly entirely down the middle. I did the chip first, it looks fabulous, like it never even got chipped. Even the color is a near match (light concrete greige) and am still thinking maybe I don’t have to paint it. Easy to work with, slightly sticky on the hands, but you need it to adhere. Dries fast. Hope it works as well on the larger project. Glad I bought.

Good product

It works, my only real complaint is that it's difficult to get off your fingers, but that was probably my own fault since I was squishing it too long. The smell is a bit off putting as well, but that was expected. Overall it's a good product.

This stuff rocks!

I run a repair business. I first used this to repair a leak in a galvanized elbow in a well setup that was not easily replaced. Set up in minutes and stopped the leak dead. Now I use it in our business doing interior repairs and on RV roof leaks.

Works as expected

Blends easily and curing time is accurate to the instructions. This stuff can really save a project if you have a screw hole that's been stripped out.

Incredible stuff

I've been testing various types of glue and epoxy for aspects of my artwork. After 4 or 5 fails with other products, I tried this one and so far it works with absolutely every combination of materials I've tried. I'm so glad I found it!

Worked great for me

The screws on the hindges of my bedroom door came out and I used this product to keep the screws and thusly the hindges in place. It took about 30 minutes to harden but we let it cure overnight before using the door again. It's been several months now and holding great.

A little bit goes a long way.

I love my husband but I LOVE this stuff. OMG it really is a great little bit of putty. It has saved me soo much money by letting me fix things rather than throwing things away. A little bit goes a long way. Now I'm going To be honest. It smells. It smells bad BUT it will go away. I had to play with it a bit to figure out how it get it to work for me. Let me explain. Lol I have kids like a lot of people you know they can play ruff. Well we were playing and my glasses broke. The arm broke off right at the screw. Yeah no way to fix that one. I'm 2mo away from my eye appointment. This sucks. To the puddy I went. I took a little bit off with a plastic knife and squish the together like the instruction said till it became one color. It smelled really bad. My hands smelled really bad but I let it go. It was really soft and I knew that I needed it to get a little harder so I let it sit for a little bit. Like a minute or 2. Then put my glasses back together and put a little bit of the putty around the part that broke. I let it sit to get harder. I would check it about every minute to adjust it. I used a little water to smooth it out and let it dry completely. After about a hour I came back. The smell was mostly gone and it was hard. I took fin sandpaper and worked the putty down a little in some areas then painted it the color of the glasses. Yes it con no longer bend but it's only for 2 month right then I'll get a new pair. Ya gotta see right! Lol I fixed a handle and a few other things around the house and I still have some left. I have some more shipping to my house in 2 days. You may not like the smell but you will love saving a lot of money with this stuff.

Works Well

Thanks to the Seller for getting this to me so quickly. I purchased this Epoxy Putty Stick because the soap holder above my sink was damaged. I didn't want to take the whole thing down and replace it so I decided to try this. It worked like a charm. All I had to do was cut the size I needed and massage it to one consistent color. It was a large piece so I had to do it in stages. Had I been a little more patient it would have matched perfectly but mine turned out a little rough. It is now painted and unless you inspect closely, you wouldn't be able to tell. I would definitely by the product and get it from this seller again.

Full Reviews