Features:

  • ★【Wide Application】The 194 LED bulbs can be used for license plate lights, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, glove box lights, inner tail light bulb, etc.
  • ★【Fits Socket】The 194 LED bulbs are compatible with 194, 168, T10, W5W, 175, 2825 sockets. Canbus error free.
  • ★【Super Bright】Pack of 10, Voltage: 10-16V, Power: 2W/PC, 6000K white. Low power consumption and longer life span.
  • ★【Easy Installation】Non-polarity, small enough and strong adaptability to fit your car. No drilling, no wiring, no damage.
  • ★【Important Note】These 194/ T10 LED light bulbs DO NOT compatible with "Skoda" Brand and DO NOT use as license plate light of "Volkswagen".
Super bright is right!!

Bought these to replace the stock 168 and 194 halogen bulbs in my vehicles. They worked great and all 10 worked. Not a dud in the bunch. My only comment is that they are so bright that I actually took them back out of the license plate bulbs on my car because they were too much in that location. I simply bought some that weren't quite as bright for that location and used these to replace the interior bulbs. Great product and super bright white light output. Also, these are smaller than a halogen 168 or 194 bulb so they should be able to work on any existing housing.

Smallest T10 LED

This is the smallest T10 LED that I have found. I initially bought a different product to replace a burnt out license plate light. The LED was too large and didn't fit in the light compartment. This one is significantly smaller and fit easily. Despite the small size, it gives a very bright blue/white light, even with only 2 SMDs. I have also used it to replace DRL and marker lights. I would not use it through a red or amber filter, this gives a slightly dull or green color, respectively; instead use a red or amber LED. And I personally would not use this color for interior lighting. Compatible with 2013 Prius and 2013 Outback.

Smaller and brighter than the competition - License Plate & Interior for 2012 F150

I used these to replace the 194 size bulbs for the license plate and map lights in a 2012 F-150. I tried another brand in the license plate lights first, but the bulb was too tall and I couldn't reassemble the lens. The Oxilam bulbs are much smaller and fit perfectly. The bulbs that I replaced were covered in numerous LEDs, and I worried that the Oxilam bulbs wouldn't be as bright since they only have 2 LEDs. I was wrong. The Oxilam bulbs were at least twice as bright as the LEDs that I replaced.

Works great, license plate light bulb

My 2012 Hyundai Sonata failed the inspection due to a burnt-out license plate light bulb. Ordered this from Amazon and changed out both the license plate light bulbs. Item fit perfectly and gives out a nice white light which completely overshadows that cast from the existing bulb, ensuring that my license plate is highly illuminated (I'll have to be careful with my driving habits now :) ). I give it 5-stars for now and will update if I see any issues with it.

Great connection, not too dim/not too bright..just right

Great for my 2018 Toyota Highlander. Replaced the front 2 maplights,2- 2nd row, 2-3rd row, 2- 2 bottom doors and 1- rear cargo. Down to just 1 left so have to order more, as I'm short 1 piece

Simple upgrade from stock, much brighter

I chose these OXILAM LED bulbs in style 194 to replace some of the interior lights in my car. (I did the same with my previous car, a Mazda, and really liked the results.) Once again I was amazed at the difference in clarity and brightness. If you can access the inside of any interior fixtures in order to change the bulb, DO SO! Although interior lighting is getting better, LED replacements can still make a significant improvement. I was really happy with this brand of LEDs as they are made well and fit just like the stock bulbs. They also dim down just like the stock bulbs, with no flickering.

Love em

These are wonderful. I was thinking I would have to figure out orientation for them too light up, but their circuitry works either direction. Simplified things since I was doing a gage binnacle, and I didn't want to pull it back out to flip them around. Super bright, and their also dimmable which is great. I thought my dimmer switch would no longer work, but I'm pleasantly surprised. Price is just about on par with a 10pack of sylvania 194s from the parts store too. They do get a little warm, but not any warmer than an incandescent 194. I would definitely buy again.

Wow, brightens up the place - 2015 Subaru Forester

I bought these for mainly my interior lights (bottom of my doors, cargo area, parking lights). For two little LEDs they are so much brighter than the HOT incandescent bulbs. I was worried of the car's plastic housings until I burned myself on the factory bulbs. These LEDs do not produce nearly the heat incandescent bulbs make. They really help light my entry into the vehicle and the cargo area. I put two in my headlights to replace my parking lights and what a difference from the old bulbs. I gave my extra lights to two of my friends and they love the difference these made to their vehicles with just a little bit more light. I recommend these for anyone looking for a great LED to brighten up their vehicle.

Bright, but not too bright!

Love these little LEDs. Initially bought JDM ASTAR ones for license plate lights on my Ford Edge, but they seemed too bright for me—there was just a whole lot of unnecessary light going on for my taste. I later found these OXILAM lights that do not have LEDs pointing directly away from the base (like the JDM ones) so I figured they wouldn't be quite as bright. Tried these on and was pleased with the result. Would recommend these for areas where you don't necessarily need the most brightest light—license plate, vanity, other small interior lights, etc, but want something way more than stock filament bulbs.

Great for F150 plate light!

These guys are tiny! Which is exactly what I needed for the plate lights on a 2018 F150, there is a limited amount of clearance. They have two LEDs and put out more than adequate light for a plate as well as the bed light. I like these bulbs because rather than having bent over wires to make contact they have soldered areas which fit nice and snug in the socket.

Full Reviews