• EFFORTLESSLY PULL PALLETS: Attach this heavy duty pallet puller to any pallet (wood, polyethylene plastic, steel, aluminum, cardboard, etc.) in order to drag it to the rear of a trailer for easy forklift truck access; Puller has a single scissor design to allow for a wide jaw opening; 10 teeth on either side of jaw to easily grab pallets; As you pull, the puller will increase the grip on the pallet plank for safe movement; For pulling only; Not intended for lifting
  • LARGE SIZE: Rated to pull 6,000 pounds (2,722kg) of cargo across a smooth surface or floor; 6-inch (15.2cm) jaw opening (measured from tooth point to tooth point) opens wide enough for large jobs; 2.9-inch x 1.9-inch (7.4cm x 4.8cm) jaws with 0.4-inch (1cm) long teeth; Overall dimensions 19.25-inch to 13.75-inch (48.9cm to 34.9cm) length; 11-inch to 13.25-inch (27.9cm to 33.7cm) width; 3.4-inch (8.6cm) thickness; Best suited to grip planks ranging from 1.25-inch to 4-Inch (3.2cm to 10.2cm) thick
  • USE YOUR CHAIN OR STRAP: 2.25-inch x 1.3-inch (5.7cm x 3.3cm) inside diameter (ID) end loop will connect to your 1/4-inch GR 43 proof coil chain or strap with a grab hook and attach to your forklift truck to pull a loaded pallet to a convenient spot for lifting, transporting, or unloading
  • BUILT TO LAST: 6,000-pound / 3 Ton (2,722kg / 2.7 MT) maximum capacity; Constructed from solid steel with a powder coat finish for maximum strength and longevity that resists corrosion
  • HIGH-VISIBILITY: Comes in a bright yellow color for best visibility against your other parts and tools; Vibrant color allows you to spot the puller across your workshop or warehouse and against any background

Happy with the quality and fast delivery.

Very well made and heavy duty.

It worked as it was supposed to! We bought a preassembled shed that was attached to a pallet. We had the store set the shed on our trailer and then used this pallet puller to move the shed on the pallet to the back of the trailer to slide it off. Good gripping, very easy to use.

I used it to off load double stack pallets that are 2000lbs each. Not once did it ever slip! I am very satisfied with this equipment.

Helps solve the problem when you are 1 person unloading pallets on a truck

I used this today to pull a 4,500 lb. machine from the front of a 53' trailer to the back and it performed flawlessly. I'm very happy with this purchase and highly recommend this product. It's very sturdy and heavy duty. I have no doubt that it will handle 6,000 lbs. with ease. Fast delivery to boot.

This is exactly what I needed. I’ve had one like it for the warehouse before, but it disappeared many years ago. This is really handy when you have pallets deep inside a container without a dock. No longer needing to tie something to the pallet to pull it out is wonderful. This pallet pulled clamps down on the center part of the pallet, and the harder you pull the tighter it grips. Spikes dig in for traction. It releases easily. This puller seems to be built well, and I see it being very useful many years to come.

I many make deliveries every day in a semi truck on my route in the city. Often the customer will have a forklift but no dock. So I will either have to use only a pallet jack to drag the pallet to the back of trailer (which may be impossible depending on how long/heavy the skid is) or not be able to deliver the freight at all. Now that I have the pallet puller from Bob's, however, we can drag any pallet, no matter how heavy, to the rear of trailer for unloading. I use it at least once everyday. Every city truck driver should have one!

Great product! Wish I had got one of these a few years ago. I was able to unload a full semi trailer of a mix of palletized product and loose product by myself in about an hour. The same job before has taken two of us the same amount of time because of fighting with getting the pallets moved to the end of the trailer.