Features:

  • ☀DESIGNED FOR MOTHERBOARD WITH 4PIN RGB LED STRIP HEADER - Customize your desktop with multi colors and lighting modes by using original pc rgb sync software. Airgoo RGB LED strips are super bright and are currently compatible with ASUS RGB SYNC, MSI Mystic RGB SYNC Motherboards with 4pin RGB LED header (+12V, G,R,B), not for 3pin Digital RGB LED header (+5V, DATA, N/A, GND).
  • ☀RGB SYNC SOFTWARE CONTROL - You can use ASUS RGB SYNC, MSI Mystic RGB SYNC to control these lights, a variety of colors and brightness can be changed simultaneously with frequency changes by rgb sync software. Before you buy these lights, make sure your motherboard has one 4pin RGB LED header (+12V, G,R,B), not 3pin Digital RGB LED header (+5V, DATA, N/A, GND). If you need 3pin Digital RGB LED Strip, choose Magent Digital RGB Extend LED Strip Light from airgoo.
  • ☀ALSO FIT FOR AIRGOO MAGNETIC COMPUTER LED STRIP FULL KIT EXTEND - Extended rgb led strip lights for airgoo magnetic computer led strip kit with rgb led controller, total 4 pcs led strip lights can be connected together in one chain, illuminate your full tower case.
  • ☀PLUG AND PLAY EASY OPERATION - Airgoo Full Kit comes with all the essential parts you may need for your computer. High Quality PU Tube led strip lights are firmly attached to PC case via super strong magnet inside, suitable for iron surface only. Before instal them, first you need straighten the led strip lights to make it easy to be fixed on pc case. If you need more lights, you can order extended led strip lights kit from airgoo.
  • ☀It's a very cool product for DIY game players, fit to decorate your tower or gaming computer case. Customize your workspace with vibrant LEDs to set the mood and illuminate your hardware.
Perfect for what I needed

Completed my first build and wanted to add some lighting to my case. I have an ASRock B450 Mini Itx Gaming Motherboard and opted to go for RAM that had no lighting to ensure it worked. This fit the bill perfectly. It plugged right in and using the ASRock software, I was able to adjust it using many many colors. The magnets were of good strength and i made sure to unroll the strips. I also managed to tuck them into small gaps and used leftover zip tied to shorten the extensions. The lights are quite bright and gave me exactly what i was looking for at 1/4 of the price of other brands. Will update if there are any issues

That's the one I needed for my new computer case!!!

Since the very first time I saw this item on Amazon, I said to myself "That's the one I need for my new computer case". Upon receiving it, I confirmed that I was absolutely right. The item arrived quickly, was well packed in an ESD bag inside a sturdy brown box. Each strip is 20in long but can be cut, as needed, to execute very special layout (you will have to do some soldering and additional wiring work for that). For my computer case, I cut them in five pieces to have the lighting effect I desired. Because you can cut the strips, you are able to place the pieces where ever you need in your computer case and obtain special lighting you want; that's definitely a plus. Different modes are supported like direct color selection (white, blue, red, green, purple etc.), color transition, color flashing, and more. Three of my favorite features are the brightness control, the color transition, and the ON/OFF function. These LED strips will not increase your computer case temperature neither your electric power consumption, so let them ON and enjoy. Connecting them to your power supply is pretty simple; a) connect the strips to the output ports of the Y connector (match the arrows to avoid reverse polarity). b) connect the input port of the Y connector to the LED controller (match the arrows to avoid reverse polarity). c) connect the LED controller to the Molex to DC plug. d) connect the Molex to DC plug to an empty Molex connector from your PSU. If your PSU doesn't have one, just buy a SATA(male) to Molex(female) connector online for a very cheap price. The RF remote control signal is strong, I was able to managed the lights about 25 feet away from my computer(direct line of sight). I have a suggestion for the manufacturer: instead of having 4 round pins with the same size and an arrow to mark the common, why not making the common pin larger than the 3 others? That would make it impossible to have a reverse polarity situation. I will not stop recommending this product.

Inexpensive option for RGB lighting

I bought this LED kit to light the inside of my PC case. I had previously purchased the Phanteks PH-LEDKT_COMBO: RGB LED Strip Combo Set - Retail Cases, but discovered that the version of Mystic Light for the MSI B350 PC Mate motherboard has a limited number of colors through its RGP header, and orange is not one of them. After getting the Super Bright Computer LED Strip Kit, I tested and found that the Phanteks LED strips do work with the Airgoo controller. Compared to the Phanteks strips, the Airgoo strips are just as bright and colorful, but the magnetic Phanteks have the advantage of being easier to attach and move around. Orange looks good. It's not too yellow or red. White is pretty close to pure white, maybe with a slight blue, but not bad. All of the colors and modes seem to work. Some of the flashing modes give an interesting visual effect, especially when the room is dark. When the computer is turned off, the LEDs go out. When the computer is turned on, the LEDs come on with the same color/mode that was active when it was last running. A nice feature of this product is that the controller does not have to have a sensor with line-of-sight to the remote to operate, so it can be hidden with the cables. I have not tried the remote from more than a few feet, but the buttons work well with no delay. There is a wide range of brightness and speed adjustment available. While there are most likely better options for RGB LED controls that would have more options and effects, there is nothing wrong with this set, especially considering the price.

A worthwhile purchase for glass computer cases.

This is a neat little device. Recently I bought a computer case with a glass side and immediately thought "Huh, would be nice if it was bright enough to see all my computer's guts." So I bought this light strip. Out of the box this product is well wrapped. The led strips are coiled snug and the whole box fits in my palm (sort of). There are several pieces and it was fairly easy to attach them to each other whilst being installed into my PC. The led strips have a peel away strip with sticky solution underneath. Sticks well if you leave it alone. (I chose to use zip ties because it was easier to install that way). It should be noted that the power connector is a four pin molex socket. When I finished the installation and powered up my PC the lights immediately turned on. Using the remote I can change the color, make the lights pulse, make the colors fade out and fade in a different color, change brightness, etc. The remote is simple to use though I've noticed that if I have the lights set to fade in and out they stay solid when changed. This leads me to find that setting again on the remote. This product actually helped me find the wire that was caught in one of my case fans after the power button was hit post-installation.

As Advertised for a Great Price

Added the Airgoo Full Kit Computer RGB 5050 to an older PC as part of a case mod. After a few weeks it still works great! Note that they apparently replaced the old adhesive with better material due to complaints--mine attached vertically without a problem and is still right where I put it. Also, the power cable in the photo needs to be updated: my unit came with a SATA power plug, NOT MOLEX. Not a problem for me, as I have plenty of SATA coming from my PSU, and IMHO it is easier than molex anyway. Edit: The battery that came with the controller only lasted about five weeks and then needed to be replaced. Potential buyers may want to purchase a spare (CR2025). Otherwise the unit still functions like new.

Works well with MSI's MysticLight

I was in the process of building an all (mostly) white PC and realized I was lacking on some RGB's. Well, I looked and ordered these. They're excellent. They are nice and bright and the colors are represented really well. The white could be whiter, but this is an RGB sooooooooooooooo. Either way, I love these and will likely get more. The best feature to me is the magnets. You can use the adhesive strips, but I like that the magnets are there so if I ever need to change them it'll be easier and no mess to clean up. I love these, wait, did I say that already? You get the point. :)

Great quality and very bright!

I would like to start off by saying that their costumer service is great! When I first received my RGB strips, one of the strips' red and blue leads were not working so I contacted them with the issue and they responded that same night telling me that they will send me a replacement strip. They did and the new strips arrived almost as fast as the first pack of strips! One of the best customer service reps I have contacted in my experience. Now, I installed these strips into the RGB headers on my ASUS ROG STRIX B350-f Gaming which are very much compatible with each other and work very well with the AURA software! Also, the magnets on the strips are honestly a lot stronger than I thought and make it so much easier to fit and hold the strips into corners inside the case. I have them running along the bottom and top of my case and are even slightly hidden for the most part, yet they are still very bright and will illuminate all of the components that I have installed in there. If you are on the market for RGB strips for your PC, definitely give these a go since you definitely get great quality at such a low price (at least I sure did!). I honestly just love how my PC looks. The pictures that go along with this post were taken in the day-time with all the lights on in my room, which goes to show how bright they are. I am very pleased with my RGB strips!

Well worth every penny

Well worth the price and the features just make the deal that much sweeter. I can't speak on how long they last since I just bought them but so far it's been exceptional. For the sake of all of this, I'll start with the one and might I say only flaw with airgoo led kit. The adhesive on the bottom of the led strips are not as great as I would have liked it to be. Luckily I was installing them on a rack that I was able to use a zip tie around to secure them in place. Now to the good side, set up is easy, they have brightness control along with multiple color choices. All of this can be controlled by the remote. They also have a few patterns of lighting if you want more than just the same color all the time. Overall I would not only buy them again if they broke but if a friend asked me about computer LEDs I'd immediately show them these LEDs.

Full Reviews