Features:

  • .Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.
  • .Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
  • .Center of hole hand size: hour hand is approx. 235mm (9.25 inches); Minute hand is approx. 152mm (5.98 inches); Second caps is approx. 7 mm (0.28 inch).
  • .Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch).
  • .High Torque "I" Shaft Clock Movement: suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
These work great and look nice too.

These are working great so far. Built Two 3’ diameter clocks and these are a great fit. Minimal tick noise, they do make sound but not any more than a normal open face clock with similar movement.

Don’t be confused!

This is embarrassing! The instructions and parts list, which were shipped with the parts, is incorrect. I sent the first one back because I thought a part was missing. The part is actually in the hole of the small hand. I figured it out when I received the second one (again with the same part “missing”). The company needs to update their instructions to eliminate the confusion (for us slow folks!). I have installed it and it’s working great in my clock!!

Finally Done!

After procrastinating for a couple of years, I ordered this kit to replace the faulty mechanism for our "biga" wall clock. the hardest part was on removing all the screws from the clock backing. replacing parts was easy. Note - be sure to test the new mechanism before replacing any backing and hanging back on the wall. I did this and discovered I had to make a minor adjustment to the hour hand for proper clearance.

A great solution for repairing a large wall clock we already own and like rather than adding to a land fill.

A great solution for repairing a large 26" wall clock bought from a furniture store like 15 years ago. The original battery powered unit gave up the ghost recently and I looked around for a replacement mechanism rather than a new clock. This was one of the few that is sized for a 25-26" clock face. Installation literally took minutes and it's keeping very good time. For $14 this sure beat shopping around for and buying a new clock for that wall space. This way we get to keep the clock we like for a few bucks and a few minutes of effort.

Perfect fix for Howard Miller clock

Lost the screw cap on my Howard Miller clock (which also ran a little slow). Replaced the movement with this one in less than 5 minutes and the original hands fit perfectly. Now keeps perfect time!

Fixed my big clock!

Just what I needed! I bought a clock from a furniture store and the hour hand worked but not the minute hand. It was a huge clock and the clock hands were long, the minute hand being 20 inches. I bought this hoping that if I replaced it all, it would work again. It was super easy to put together and works great!

Exactly the right fit

I installed this product without any trouble at all. It fit a Clock who’s mechanism had been broken. It keeps perfect time and I was able to use the original hands. This product has made me consider building my own clock. I really appreciate the accurate dimensions and instructions

Perfect!

I found a clock at Hobby Lobby and it didn't have hands and it was marked down to $12 from like $149. These fit perfectly and were very easy to install!

Keeps on tickin'.

I've waited about 3 months to write my review on this. It's held time perfectly for those 3 months. Looks great, decent quality, and super easy to install. Would definitely recommend.

Perfect replacement for a large wall clock.

Very easy to replace, I was also able to use the old hands, as they were custom design.

Full Reviews