Features:

  • BougeRV trailer lights have 7 function : Stop/Turn/Tail/Rear reflector/side reflector/side marker light/license plate light, Right trailer light have 6 function : Stop/Turn/Tail/Rear reflector/side reflector/side marker light
  • All diodes are LED ,NOT any Bulb. Super High visibility and Longer Lifetime LED advantage！
  • Easy to instal, The distance of two studs bolts is standard 2”, Direct replacement for your original incandescent bulb unit
  • The outer protective cover without screws protects against water and dust. Dustproof and anti-corrosive.
  • Universal for Under 80" Inch width towing vehicle, like truck, trailer, Dump Truck，boat, ,Van, caravan, Camper, RV etc.
I guess submersible does not mean waterproof!

Well it’s my second month of having these on my JetSki trailer. They started out strong nice and bright. I have launched the JetSki about half a dozen times since I put his lights on notice yesterday one of the lights was DM down to one LED. Upon further investigation realize that both of the tail lights are half filled with water. Maybe this is just a fluke, hoping the seller will do the right thing and exchange them. Will update my review depending upon the sellers response. UPDATE: after contacting the seller, I received a response from Krystal within hours! She was very concerned and refunded my purchase price immediately! GREAT CUSTOMER SERVICE!! I would definitely recommend these lights for any non-submersible applications!! Thank you Krystal!

Nice and bright - really nice lights

These lights went on easily, and are really bright and clear. Very happy, these make trailering much safer than the old dim lights that were on the trailer before. Very happy with these lights. Five star rating. Hopefully, they hold up over the long haul!

Easy to Install

I bought these for my trailer as the ones I had were not very bright, it always made me nervous driving at night with the trailer. Now with these lights, there are no worries. These are bright and work very well, they were easy to install and I feel they are a great value for what you get. I hope they last a long time.

Sturdy and Bright Tail Lights

These are a very sturdy and bright set of tail lights. They installed quickly and easily onto my trailer. As with most LED lights, I have found the ground needs to be a very solid connection.

The quality of these are far superior and less money highly recommend

I bought trailer tail lights from Discount retailers in the past The quality of these are far superior and less money highly recommend

Excellent new or replacement lights

I have a 4'x10' utility trailer that needed replacement lights. I bought this set because I did not need side marker lights, just the two rear lights. These fit the same bolt pattern as the originals so only had to cut the existing wires and wire in the new ones. Old lights did not have a separate ground wire; new ones do. I soldered a ring connector on the white (ground) wire and used one of the mounting studs as the ground connection. Working well after a month of use. Note: I soldered the new wires to the old ones and used heat shrink tubing over the solder joints to make them look better and be water-resistant. Only problem that I ran into is that the wires protrude out the back of the housing a bit where the original lights had the wires exiting from the side of the housing. I had to use a couple of washers on the mounting studs to move the housings slightly away from the mounting posts to give the wires room to bend around the post. Alternative would have been to drill a hole for the wires to go through my posts. Lights are very bright, much brighter than the original incandescent units. So far I have put about 400 miles on the trailer with the new lights, and some of the roads were washboard gravel. Lights are working fine and I am very satisfied with them. A couple of other reviews indicated nuts were missing and both lights had the license plate window. My set had neither of these problems; all nuts were included and I received a left and right side light. The only down side is that there was no wiring information in the box with the lights. You can get the information from the on-line listing but it would have been nice to have the information in the box and have it handy when doing the install.

Great trailer lights except!

UPDATE: The wiring took a few minutes to sort out otherwise a great buy, pulling a tractor on dark roads the rear lights are very bright and well made! Nice product shame about the wiring all different colors, frustrating when it could have been so easy.

Great light kit

Definitely a great kit for the money $. Lights are pretty bright compared to others, kit has everything you need for the install, mounting was easy, just dont tighten the bolts holding the lights to tight (plastic clip holders can crack) . I used a little dab of Loctite on each bolt and it worked perfectly. Nice lights

Great replacement lights for my trailer.

I purchased these to wire into my trailer and replace the original regular bulb lights. These were the same bolt pattern as my original lights and even worked with the original license plate holder. The wires are really long and had about 5 extra feet that I didn't need for my 5' X 8' trailer. The only issue was the ground wire is very short so I needed to drill a hole to allow me to fasten this to the trailer for ground. I was going to make these a magnetic temporary set but found it was easier just to bolt them on and it only takes 5 bolts to remove them so they are not left in the weather and banged around when I using the trailer in my yard to haul wood. They also have the clear/White LEDs for lighting the license plate.

Very Pleased With These Lights.

I purchased a set for my 16 ft. trailer and they worked so well that I bought another set for my 10 ft. trailer. If you're tired of messing around with bulbs that are always not working due to corrosion or having been shaken out of contact, then these are the answer. These lights are really bright and are a snap to install. Only three wires are involved. The white wire is the ground so that leaves only two to hook up to running lights and brake lights. Total install time was about thirty minutes.

Full Reviews