• Mini cover for a single cable: Perfect when you only have one cable to conceal. Designed to enclose a low-voltage wire or cable such as a phone/fax line, speaker cable, or lamp cord
  • Family safety comes first: Loose cables are not only unsightly, but they could also pose a possible danger to your baby, children and pets. Install our easy-to-use wire concealer to prevent unforeseen accidents
  • Strong double-sided adhesive tape: Comes with clear PE mounting tape that has strong adhesive and is flexible. Simply secure the channel with the cable where needed
  • Home and office organizer: Use our cable concealing system to organize and manage the power and electrical cords around your desk, other work areas or entertainment system
  • 8 cable channels for maximum coverage: Each cable channel is 0.59” x 0.39” x 15.7”. Provides ample length to accommodate any home or office project! Customer satisfaction guaranteed

Used the kit to hide some wires when adding LED lights to a piece of furniture. The adhesive is included is great quality and holds solidly to the wood. The plastic was flexible enough and easy to cut. Was the only kit I could find that was small enough to hide.

These wire covers were perfect for my under cabinet kitchen lighting wires. They were easy to cut with just a razor blade, and the double sided tape holds well. They are very thin which is what I was looking for. Couldn't be happier with the outcome! I did NOT want wires seen under the cabinets.

We installed a large-screen TV in our kitchen and needed ~ 6 meters of HDMI cable to connect to the distribution point. I checked both commercial and 'home' raceways and chose this brand from Amazon. The HDMI cable is nearly 1 cm in diameter and I was concerned that it might be a tight fit, but I got lucky. The run covers two planes: vertically up the wall from the TV to the edge of the ceiling, left on that wall to a corner, and left on the adjacent wall to the connection point. The first two strips took about 10 minutes each to install while I got the 'feel' of the product, and the remaining 8 less than 5 minutes per strip. I had to cut 3 strips to length. I found that my carbide-bladed chop-saw worked perfectly for a clean and precise edge. The only problem I had was the inside corner: the cable was too stiff to use the 90-degree corner connector so I just mitered the strips to 45 degrees, just as one would with a wooden molding. Job done. The product is well-designed and sufficiently well-made. I had no problem with the adhesive tape, I found that a pair of sharp-pointed tweezers were perfect to grab the corner of the red plastic. I did not run out of tape, as some other reviews reported. My only complaint is the length of the strips. I would have preferred 4 strips twice as long (instead of 8 as they are) which required nearly twice the work. Of course that would have made the packaging twice as big, so I understand the reasoning. So only 4 stars for 'Easy to install'.

I was looking for something to hide my wires to make it look more elegant. These came in handy. I purchased them because they looked very basic and not very flashy. The colors were abundant to choose from. The installation was easy and very straight forward. They have the angle and right corner pieces as well. Basically, you would attach the back piece to the wall, insert the wires in, and slide in the top piece to close it. So far, its been over a month and the adhesive appears to be staying. I used it to stick up some camera wires in my garage and so the temperature has been between 55 to 80 degrees so far. I would purchase this again if I need additional parts.

This system is just what I had been looking for to cover up wiring in two locations in my home. It's easy to install and looks great once it's up. A hint on peeling off the backing on the two sided tape is cut the tape on an angle so that you have a point on one end which makes it much easier to slip a hobby knife blade between the layers. Just be patient and take your time with the tape. The tape does a great job of making sure the channels stay on the wall as well. This was a great purchase with no regrets and i really like it.

I was looking for something to hide the ugly cable that Verizon needed to drill through my entry door to install fiber. I luckily found One-Cord Channel Cable Concealer. I spent most of my time measuring and playing with the parts and how they fit together. After careful measurements and mock ups I cut my first channel and second. They fit pretty perfectly over the door. I actually put the double sided tape on the channels first and then attached to the wall. This I found to be the easiest and most forgiving manner to install. I only used one curved piece and lined up the rest of the channels back to back. The straight connectors I found a but bulky. If your line everything up really straight (use a level) the seams are hardly noticeable and after painting I believe will be almost invisible. I will later paint to match. In short just a great product at a great price.

Great product, exactly what I was looking for. A small and low cost conduit for my ethernet cables. It can easily hold 2 ethernet cables side by side, and it still has space for some play. Easy to insert (can start from the end or just push it in at the middle). Hardest part is getting the second part of the sticky tape off when installing.

Great product. Shipped fast. This is the perfect channel to hide ethernet cables. They supply you with everything you need. The included corner pieces were just what I needed to run the channel down a wall and across the top of my base boards. This product is not just for ethernet cables. You can hide just about any cable you would need for your home. I didn't try it, but it looks like there is enough room to even hide those thick HDMI cables. I will definitely buy again if I need to hide another cable.

I don't think I could be without these now. With them in place, there are no unsightly cords visible in my house. My IP technician set up a wireless router in my living room. The term "wireless" is deceiving as he needed to run a line from a telephone jack to the router. Well, he did and the cable wire was GREEN! Who does that!!?? There was a lovely green wire running from behind my sofa to the etagere where the router sits. My walls are white....I was appalled! Needless to say, the cable concealer came to the rescue. It was so easy to install and did the job it was supposed to do. I'm thankful that they even make this stuff.

I bought this to hide the cords of overhead hanging lamps, so I attached it to the ceiling. I wasn't sure how it would work, as my ceiling isn't completely flat (it has a slight texture) and the cords were rather thick. I'm happy to say, it worked perfectly. No problem with adhesion, nor any problems with getting the cords inside and the track closed. It does a great job of hiding the cords, just like I wanted. Because of this, I placed another order to use it to do another project in my home.