Features:

  • MULTIFARIOUS TERMINALS - All application kits include 12-10, 16-14, 22-16 awg butt, ring, hook, fork, spade connectors. Different Color coded tubing with wire gauge imprint provides easy identification.
  • NON SLIP EVER - Translucent heat shrinkable tubing provides high tensile strength when heating. Strong copper barrel to hold the wire tight when crimped. Make sure our wire will never slip out of these connectors.
  • HIGH CONDUCTIVITY – High quality copper provides excellent conductivity, increased current flow, and ensures less voltage instability, preventing wiring failures and reducing equipment downtime.
  • INSULATED AND ANTI-CORROSION – High quality insulated cable splice connectors for wire connection that provides excellent sealing and protection from mechanical damage combined with Anti-Corrosion effect.
  • EASY TO USE - Strip the wire insulation with a wire crimper, crimp the connector barrel, and heat with a hot air gun or small torch. Start establishing secure, persistent connections in seconds. No soldering kit required.
Great Set

These connectors provide secure connections and heat-shrink real nicely. Considering what they charge at the truck stops from Iowa 80 to Joplin 44, these are a STEAL. Great value.

Work great

I prefer to use hestshrink crimp connectors because they seal up on the site and prevent water and moisture from entering. These connections are a very good quality and I have not had any problems using them for my LED lighting

Heat shrink works great.

This is a great kit full of assortment connectors for a bunch of different sizes of wires. The color coding according to wire sizes, easy to use and allows view of the wire to precisely locate it for an effective joint. They bond to the wires by use of a heat gun (or lighter) after crimping, and an adhesive seals the connection. It basically glues the whole connector and wires together. Not only serves to waterproof the connector, and solves both the corrosion problem and the wires pulling out problem. This is realy a nice terminal. I recommend them to you and any else who works on boat, trucks, cars, farm vehicles. You won't regret it.

Good price and good quality!

I actually counted and all 270 pieces were there as promised. These are the same good quality you would Gerst any big box store at a much better price. I would recommend purchasing

Wire connectors

These are a step up compared to the standard automotive wire connectors. The heat shrink is very helpful for keeping water away from the terminations.

Great product!

So far I've used about 30 peices out of this set to re-ground or replace 52 year old connections in my older car. I dont have a heat gun so I use a lighter to lightly braze and they shrink right up! For the price they are great.

Great selection of size and types

Really happy with this set of Connectors. The variety of sizes is exactly what I needed, not just in wire gauges but each wire gauge connectors had a variety of hole sizes to fit various bolts/lugs . They applied easily and strongly, and the heat shrinking formed a nice tight bond (that even self healed any pinches from the crimping tool).

Nice assortment and they shrink well.

These work well and shrink up nicely with the heat gun. The entire crimp connection is sealed both sides and should keep moisture out for a long time.

Excellent Shrink Sleeve Quality

I started using heat-shrink crimp connectors for automotive applications a while back, now I use them for everything. I had been using connectors with a 2:1 shrink ratio, so I was looking forward to trying these with a 3:1 ratio. First, the connectors themselves - they are tinned copper, they take a crimp well with any reasonable crimp tool (I used the cheapest one on my bench just to try them out). 10ga stranded silicone-jacketed wire was a very snug fit in the yellow connectors, it took a little concentration to assemble those. 12ga was a breeze. I also did a test crimp on some 18ga TXL automotive wire using the red connectors. The important thing is, check your crimps - give each wire a tug before you declare it a good crimp and move on to the heat gun. The heat shrink sleeves are where these shine. The yellow connectors, especially, have some seriously thick heat shrink. It takes a LOT of heat to shrink these, this is not hair-dryer territory -- you will need a proper heat gun. I use yards and yards of thin-wall heat shrink to dress automotive wiring, I can just pass the heat gun over that and shrink it. No so with these connectors, the yellow took some concentrated heat (the smaller red connectors took significantly less). The best part is, once shrunk it provides a tough combination of sealing and strain relief. I'm hooked.

Full Reviews