Features:

  • This cable is compatible with all 4 pin and 3 pin case fans !!!
  • Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 3 Male Connectors at The Other End ( 1 of them is 4pin ,2 of them is 3pin )
  • The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector
  • The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case
  • The length of the product (Approx): 10,5 inches, Color: Black -- 4 pin extension cable Link - https://www.amazon.com/dp/B085MJPFVC
Good quality fan splitter for little money

I bought these awhile back. In fact I actually bought a second one in January as well and these are fantastic. I have Be Quiet and Noctua fans setup in my PC, all PWM 4 pin fans mind you. A total of 10 fans including the two CPU fans on my D15 Noctua cooler. A bit overkill but I want good neutral airflow going in and out of my case and being silent at the same time. I have a Fractal Define R6 case and it does come with a fan hub running by sata power in the case. The hub has up to three 4 pin PWM and four 3 pin DC fans, and me with 10 what I do I do. So I slapped one fan in back for exhaust running on the motherboard header. The two CPU fans I tied into the Noctua splitter that goes into the fan hub, then my three fans on top I connect with the splitter. My fans intaking front I also use the second splitter and my fan on the bottom intaking connects via the fan hub as Be Quiet fans give you more than enough length to connect to anything in your PC. I'll likely buy more when I decide to do a custom loop one day for push/pull radiator setups. And the best part? Inexpensive and the sleeving on the fans are really good quality. No complaints here!

Surprisingly high quality for the price

Reviewing because they keep smacking my email asking for a review, so why not. They're cables, they do the job well, didn't arrive with any damage. Surprisingly well made for being so relatively inexpensive. They arrived in an anti-static bag. While not at all necessary for a pair of cables, it's a nice touch. The wire gauge is heavier than it needs to be which is good, it means that they won't heat up under load. Overall 5/5 stars for quality and value.

Definitely worth every penny

Bought this for my current Rig which runs 4-LL140 and 1-LL120 fans. The length is very perfect, I currently rocking Fractal Meshify C and with those listed fans above.

Yay!

I'm so glad I have all of my fans hooked up and working now! Thanks! My motherboard only has 3 headers on it. My AIO CPU cooler takes up one, even though it uses two fans. My case came with two three-pin fans installed on the front and I installed two more on the top. I was using another extension or splitter I had to get three of them working, but I had no option for the fourth. Thankfully, I found this. It came with two splitters, even though I only need one. Still, it's nice to have an extra in case I want it some day. Thanks!

PERFECT SOLUTION AND GREAT QUALITY!

As I was building a new monster PC for myself the other day, I suddenly realized (but should have known that ELEVEN case fans might need fan splitters to do my build right) that I was going to need splitters of some kind to be able to aesthetically complete this machine in the best way possible. I ordered these, never having ordered splitters in my life, and I love them. The quality is amazing, they have just the right flexibility yet hold a straight line, and were a very good investment. I've got THREE installed now, but decided to 'hot-wire' the last TWO case fans since they were off all by themselves in relation to the others, making the use of a splitter very difficult. I will definitely be buying all of my future splitters and cables from these guys!

Cables are good quality

Cables are long so you you can work with your fan header placement and cable management. Used on H500M Master Case for the 2 front 200mm ARGB fans. The thin 3 way splitter cables that come with the CoolerMaster, do not allow the mobo to read the rpm for fan tuning. These cables do. Hooked one fan to the 4 pin and the other to the 3 pin so the mobo reads them correctly. All working . Stress relief is a little long for these type of cables so you can't make a tight bend but there's 10.5" to work with. The Noctua cables I purchased for a dollar more, are only 4.5" and these are just as good, longer and you get a pair.

Fully PWM control on all 3 outputs as long as there is a 4 pin fan plugged into the 4 pin output

Heavy duty and works perfectly. 4 pin connector plugs into the motherboard for PWM fan controlling. One of the 3 splits is 4 pin, the other 2 are 3 pin. In order for all 4 pin fans to be PWM controlled, one of them needs to be plugged into the 4 pin connector. All of the other fans will then go at the same speed. If you only have 2 fans plugged in and they're both plugged into the 3pin connectors, they will not be PWM controlled. They will spin at full speed. I have 2 fans and I have 1 plugged into the 4 pin and 1 plugged into the 3 pin and both are PWM controlled and spin at the same speed. I'm very pleased with these.

Works and looks as adv.

Cables worked perfectly, no problems they even came pre sleeved. Using them on 2 different computers and no problems. Its been about 2 months since instalation. [Will update if they fail.!]

Exactly what I needed

I didn't realize how quiet by computer could have been until I finally got all of my fans controlled by my motherboard. These worked perfectly. The wires feel high enough quality, but are nothing special. I wish they were a little longer so I could just run the splitter straight to the back side of the case and not have to bring my fan cables around front at all, but oh well. These splitters are a fair price for what they are while longer fancier ones are sold for ridiculous markups I'm not willing to pay.

Lacking fan headers? Not anymore

These work well for systems that need more fan header then available it reads the PWM from one fan( only 4 pin connection) and then sends the same voltage to each fan. My suggestion would be try to use the same 3 fans to prevent different sound levels from arising, or put the loudest fan on the 4 pin connection so you can make a fan curve to tone down the noise.

Full Reviews