- Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets
- Compact, weather-resistant and corrosion-proof, relay integrated, single path manifold
- Free IOS and Android mobile app easily connects with the bluetooth-enabled manifold
- Easy installation, installs direct to battery in around 1 hour
- Manifold and controller software updates provided over the Air via free mobile app
-
Information
-
Twitter
-
Pinterest
-
Youtube
-
Facebook
Crystal Dawn White
nice to have
This is nice too have so you don’t have to find a compressor every time you want to adjust your air springs. The EZ mount is nice but this is not a 1 hour install (at least for those of us that don’t install these every day) but it is doable by yoursel. The iPhone connection works well.
Anjełł Mäy
2015 Nissan Frontier
It was so nice to adjust on the fly. I could inflate with my load and see how much air I needed. Smooth ride. Easy to install
Tyana Smith
Works as promised!
So far, so good. The installation is not that complicated other than you have to figure out where to put the compressor and the manifold, where they will be protected and not exposed to the elements. I mounted mine on my 2008 Toyota Tundra up against the bottom of the truck bed near the back, above where the spare tire is located. The directions that came with this kit are clear, easy to understand, and very well written. I am a fairly experienced wrench-turner, so your mileage may vary. All in all, very complete kit with all the stuff you need to mount it up to your vehicle. (I added my own mounting screws for the compressor because I had them, and I wanted something a little more stout than the self-tapping screws that came with the kit. I drilled through the truck bed and mounted the compressor hard up against the bottom of the bed, using my stash of flat-head carriage bolts, washers and nuts. I don't recommend drilling through your truck bed, but if yours is used like mine, it fit perfectly there, so I did it.)
Brea Alyse
Great system, but I wish the minimum pressure was selectable
4.5 stars if I could. It was easy to install, but finding a suitable mounting location was a little tricky. I ended up mounting it above my spare tire on my 2015 GMC Sierra HD. I ended up using very little air hose from that location, and there was still enough wiring to get to the battery. My only complaint is that I think it should include a switch to use if you wanted to disconnect it from power. Over time, it seems to lose a tiny bit of air, and the controller requires that it always has 5lbs. of pressure in the air bags. I'm using the LoadLifter 5000 air bags with the built-in jounce bumpers, so I don't need to keep air in them when I'm not using them. So because of the 5lb. requirement, it occasionally kicks on to keep the 5lbs. in the air bags. I will probably add the switch myself. The remote control is VERY handy. I love being able to keep in in my pocket and use it while hooking up the fifth wheel or un-hooking.
Rosa Murphy
So easy, why wouldn’t you!?
This is a must have with any airbag system! This was very simple to install. Instructions were easy to read. I love the mobile app on my iPhone. I have a 37 foot fifth wheel that caused my truck to have a terrible sway on acceleration. The airbags took care of the issue, but what is nice is I can do it all with a touch of a button without leaving my drivers seat. The other sweet thing about this wireless one easy mount (25980EZ) is you do not have to drill any holes or run any wires inside your cab. You only have three wires and one airline to route once you find a good spot to mount it on your frame. My frame already had two holes from the factory that were spaced perfectly. I just installed thread inserts and mounted the compressor assembly. You may notice from the picture I added a manual fill nipple right by the compressor. This is just in case the compressor ever fails on me while I am towing a trailer. Pretty easy access spot. I would recommend to anyone. Seems to be well build and high-quality. * this compressor is airing up the load lifter 7500 XL airbags, part number 57589. High quality as well, would recommend!
Angelita Nipales
Top notch compressor kit
I this kit because it has just the right amount of bells and whistles for me. Super easy to install. I installed mine under the hood where there is a spot for an optional spare battery. Fit nicely. Out of the way. Since I do a lot of work off-road, I prefer it there instead of under the truck where anything I run over could potentially affect it or impact it.
Miriam Merlo
This kit ROCKS
This kit ROCKS when combined with the LoadLifter 5000 Ultimate setup. I use it on my 2000 Excursion towing about 7500lbs regularly. The rear end would sag about 2"...with this kit pumped to 65psi, the rear end raises 2" to compensate. When not towing I run at 15psi. Trick: back under the trailer, hit the remote and watch the hitch ball raise under the trailer hitch, then raise the trailer foot. Reverse - drop the foot, spin the crank until it just makes solid contact, then let the air out using the remote...speeds up the connection time a lot.
Nicole Farquhar
AWESOME System!
This compressor system is AWESOME! I found an installation video on YouTube that showed where to mount and how to route the wires & hoses and it made installation completely hassle-free. I did have to buy a couple of small bits and pieces to complete the installation, but all of those I found at my local auto parts store. This system makes a huge difference when towing my 27-foot toy hauler--a much smoother ride.
Keriann Pepper
Just what I've been looking for at a very reasonable price. Perfect system for my Firestone air bags.
I was tired of inflating the Firestone air bags on my truck as I often switch between an empty bed to a truck camper to a 5th wheel trailer each of which required a different air pressure. Additionally I held off buy any particular kit because of the expense and not wanting to bolt an ugly air pressure gauge to the dash inside my truck. Then I stumbled across the Air Lift wireless system. It was everything I wanted and much cheaper than the system offered by Firestone. I installed this on a 2006 GMC Sierra 2500HD. Based on the installation requirements given in the instructions, I mounted the compressor and valve assembly on a steel plate that is mounted under bed of the truck near the front drivers side. This keeps the compressor out of harms way, keeps it isolated from flying debris from the tires and also keeps it relatively dry and will not be affected by water kicked up by the tires. Given this location, it took longer to install because I had to work around the driveshaft while laying on my back. I'd say I spent 3/4 hour just installing the compressor and valve. Installing the air lines took 15 minutes and that included deciding on the best way to route them. Both very easy to do, just find an appropriate location for the compressor. Wiring the hot lead was the most work. I tried to locate a spare fuse but there were none in my truck. I should have just used the included fuse "jumper" to bridge the connection in the first place. Everything you need is included. First rate kit and system! So now I have the perfect system. I have a remote control that clips to the sun visor out of the way and very handy. And no ugly analog air gauge bolted to my dash - I really had no place to put it either. THANK YOU Air Lift!
Yawar Khan
Best tool in my toy hauling arsenal.
After watching a Youtube video, I installed it with my neighbor without an issue. The hardest part was running the wire through the frame of my truck, which was really a preference. Once installed, product worked exactly as described. I had the airbags, but I had to air up my truck prior to departure. If I needed to reduce the pressure to avoid the bounce, or add pressure to create more stability I had to pull over. I have not yet used the compressor with a load, but the next time I pull my travel trailer toy hauler I will certainly play with the settings to find the setting that gives the most optimal stability.