• 【Antenna Specifications】Gain: 8dBi; Dual Band: 2.4GHz / 5.8GHz; Connector: RP-SMA Male; Color: Black
  • 【Pigtail Cable Specifications】Length: 35cm; Connector: IPEX (MHF4) to RP-SMA Female; Color: Black & Gold
  • 【Compatible with】NGFF Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone
  • 【Please Note】Make sure you are familiar with your connectors before buying, As stated in the listing they will NOT work for Mini PCIe Wireless Card. They are for NGFF Wireless Card known as IPEX (MHF4) only
  • 【Package Includes】2 x 8dBi Dual Band Antenna + 2 x 35cm IPEX (MHF4) to RP-SMA Female Pigtail Cable

Installed in a desktop PC with an Intel M.2 NGFF wireless card. These guys work as advertised. The little RP-SMA connectors for the WiFi card are a little tricky, but after a patient couple minutes everything was hooked up. The antennas and card perform exactly as advertised. Great throughput.

Using in a desktop with a Mini-PCIE card. I get strong consistent signal, and good throughput. I am able to game with no trouble. Very happy with this antenna.

Well-made antenna with better performance at the upper end. Return loss at 2.4 GHz is -7.5 dB with a VSWR of 2.46. Best performance at the low end is right at 2.534 GHZ with a return loss of -20.0 dB and a VSWR of 1.22. A good usable range it 2.45 GHz to 2.70 GHz. At the upper ends, performance is better with 5.8 GHz having a return loss of -16.0 dB and a VSWR of 1.38. Best performance is at 5.41 GHz with a return loss of -20.42 dB and a VSWR of 1.22. Good usable range is from 5.1 GHz to about 5.85 GHz. For the price, these antenna are a good deal and the sells claims of 8dBi of gain are valid, nice they included test plots although my tested performance at 2.5MHz showed much better performance that the sellers plots. Not a bad thing.

I just used on a device I could tell the difference longer range sturdy build very well made awesome service too will recommend to friends and family you won't regret purchasing this product gauranteed

I did a antenna mod on my Hubsan 501S controller and I used this antenna as the control antenna. I went from 300 meters to over 1000 meters control distance with this antenna. Great results, I'm very satisfied.

Great if I need anymore I will buy more. Thanks for sending it again since my first package got lost. Works great on my daughters computer for her room.

I have an EVGA Classified K Z270 with the M.2 type E slot, so on a whim I bought the Killer AC 1550 add in card for it, which doesn't come with antennas. I'm happy to report that these antennas fit perfectly.

This was for my new pc build that had an Intel CNVI card slot. Could have purchased a kit that included the antennas on a PCI slot cover but I didn't like the look of it nor did I want to occupy at PCI port. Paired with an incredibly cheap CNVI card ($14) it allowed me to hide the wireless card and antenna cables by routing the leads around the back and drilling new holes in the case. This requires a 1/4" drill bit by the way. The only challenge I had was mounting the antenna leads to the card itself--it is TINY!. Good luck and be really patient with this part. It seems impossible to connect the leads to the card if the card is already mounted to the motherboard. I recommend that you pre-attach the antenna leads using good lighting, glasses, and maybe a magnifying glass. I used the back of a plastic pen to press the antenna on the port once properly aligned. Once on, it holds incredibly tight so you can route the whole assembly where you want it.

The connection points are very small. But that's the whole idea behind the m.2 Wi Fi adapter . I installed it on the Asrock mother board. Works great. I had to modify the plate with 2 holes for mounting . Installed on adapter listed below. Intel Wireless-Ac 9260, 2230, 2X2 Ac+Bt, Gigabit, Vpro ASRock B360M PRO4 LGA1151/Intel B360/DDR4/Quad CrossFireX/SATA3&USB3.1/M.2/GbE/MicroATX Motherboard

Looks good on the tower.. better than a plain round antenna.