Features:

  • [Compatible with iPhone XS Max only] Tethys' Tempered glass screen protector provides edge-to-edge protection for your Device against scratches, bumps and minor drops. Enjoy your phone’s clear display with no worries!
  • Ultra clear - transparent screen protection; it’s like you have nothing there! The screen protector is made with 9H screen hardness, offering maximum coverage for your screen including the front sensor. (Note: fits with most cases except cases with hefty raised edges such as battery cases.)
  • Easy Installation - it’s super easy to install! Comes with an installation guidance frame to assist with the application process.
  • Touchscreen accessible - receive full access to all buttons, 3D touch, touch ID, facial recognition and other functions on your phone. Box content includes 3X glass screen protector, guidance frame, wet/dry wipes, user guide, dust Removal/guide stickers.
  • Warranty - Tethys is proud to provide a lifetime warranty for the protection of your phone screen.
Amazing Glass Cover has Flexible Black Edge Seal Technology

This tech has apparently advanced a lot since I bought a glass protector for iPhone-6. This one fits perfectly on new iPhone XsMax and actually does cover all the edges, even the curved glass part that is supposed to be "impossible to cover" which is why so many glass covers are understandably smaller than the screen you're sticking them on. That was the case on my iPhone 6/6s+ and iPhone 8+. Usually the carry case lip was tall enough for this not to be a problem, but it just looked a little weird. THIS new design has an extended synthetic BLACK silicone layer that reaches around the curved edge to completely protect the expensive-to-replace OLED 6.5" touchscreen! INSTALLATION TIP: The way the covers are stuffed into the product carton is lame, and it produces some negative curvature onto the product. So when you install it, the glass will appear not to adhere along the farthest 3/8" or so around the phone. But as long as there isn't any dust trapped there, the glass eventually settles down perfectly flat, about 15-20 hours later, and the lifted-looking sections then adhere perfectly. The glass covers work great with just about any iPhone case, as long as there is no weird backwards curving edge that tries to fill in the curved part. Most cases I've tried simply snap on and the lip rises mostly straight up according to Apple's accessory standards guidelines. Thus your iPhone will be fully protected from minor impact or scratching damage. Perfect accessory, a must-have.

Great value and durable

I often carry my phone with keys. The first thing I tested out is to scratch the surface with keys. As expected the glass withstand pretty heavy scratching without leaving marks. I also love the aesthetic sense of the full framed cover. The installation is very simple. However, it’s not fool proofed. One thing I had trouble with is that the screen cracked when I try to lift the installation frame (the screen edge got caught while I was lifting the frame). But with more care the second try went much smoother. The product is certainly a great value for the money with the entire pacakge, the durability and the provided warranty.

A Must Buy

I was skeptical about buying this based on the price but after reading the reviews , I decided to give It a try. The installation was easy and it seems to be just a durable as the more expensive ones. I highly recommend.

Better than the rest.

I have tried literally every screen protector on the market. These are by far the easiest to install and are super durable. I love that it covers edge-to-edge. It does cover the front-facing camera, but does not at all hinder the camera’s focus or clarity when taking pictures. I have not had any problems with my phone cases coming up too far and lifting the edge of the screen protector. I can see how some cases may be an issue, as this screen protector does go right to almost to the edge. The plastic guide included in the package makes perfect installation SO foolproof. The only thing I wish they included was a microfiber cloth to do a final polishing wipe before installing. The wet/dry wipes they provide do leave some lint behind. All in all, I can’t recommend a better screen protector.

Omg guys! This is THE ONE!!

This will be my third screen protector for my iPhone XS Max. Originally I bought one from my cellphone store because I needed one that guy. It cracked from keys. The second one bought on Amazon in a two pack had the first one crack as well. It was a bit difficult to install the second one perfectly and the glass was “off” on my phone. After doing reviews and seeing that the Tethys case had three covers included I figured it was a thrifty but. Boy was I right and wrong! Not only is the price for this product very reasonable and affordable. W O W ! ! This company cares about packaging and design. Each glass cover is i. A protected styrofoam sleeve, ok pretty standard. Each glass protector has its adhesive side protected by (blue item in photo) a thick plastic card. It feels like the material a store rewards card would be made off and it explains how to get a product refund as this is an edge to edge protector and may not work with your case. Included are three “guide” stickers as well as a large dust absorber sticker, a wet and dry wipe, but also very impressive: a guidance frame! Put your phone inside this protective “frame” and there is virtually a 100% guarantee you will install the screen protector not only perfectly so there are no bubbles but also it is 100% straight and perfectly fit on your phone. Once on the viewing experience is very nice and it feels beautiful rubbing your fingers over the surface and edges. You WILL NOT REGRET YOUR PURCHASE.

Excellent!

This is a great product! I usually buy SimpleSnap’s tempered glass screen protectors, but I didn’t like that they left so much of the front glass exposed on the iPhone XS Max model. The Tethys ones are beautiful. It was super easy to install, too. I still have my original on since the iPhone XS Max was released, and it hasn’t chipped yet. I have it in a Ruky iPhone XS Max Glitter Case, and you can barely tell it’s there. Thank you!

How to fix air bubble problem!

Ok guys. Quick installation help. I see people complaining about the air bubbles. Those are easily fixed and I’m gonna show and tell you how. This is true with every screen protector if not installed properly. Now let’s get into it. Step 1 wash your filthy hands with soap and water. Don’t dry them with a paper towel but use a microfiber towel or your shirt. SERIOUSLY! Step 2 take your phone out of the case and place it into the provided template. Step 3 on a flat well lit surface (kitchen table) vigorously clean and dry the phone screen with the included alcohol and drying pad. DONT BE GENTLE. SCRUB THE SCREEN Step 4 use the sticker and gently blot the screen to remove all fibers that may have come off the towels when you dried the phone. Step 5 remove the screen protector and long it up to the top of the template and make sure it’s centered and place it on the phone screen. If it’s not centered lightly lift it back up and replace. Get this right now because after next step it’s a wrap and it won’t come off. If you see and dust use your clean fingers and drag it off the screen protector lightly. (Yes you can do this. But you shouldn’t have any because you followed the directions) Step 6 once screen placed correctly run your finger down the center of the screen protector and you will see the screen protector start to adhere to the iPhone screen. After this you will see some trapped air pockets on your phone screen. Pick your phone up and take the template off and using your thumbs rub the air bubbles to the edge of the screen firmly. (It’s a phone not a faberge egg). Keep doing this until you rub all the air bubbles off the side of the screen. If you have some bubbles that won’t rub away use a fingernail and lightly separate the edge of the screen protector closest to the bubbles and push them off the side. Step 7 enjoy your new perfectly installed screen protector Step 8 upvote if this helped you

Best screen protectors I’ve ever installed or used!! (Used dozens, if not hundreds). iPhone XS Max

I purchased these TETHYS full screen protectors for two iPhone XS Max’s. These protectors replaced the BodyGuardz installed by the AT&T store. To my surprise, these protectors were more clear than the BodyGuardz. I watched several 4K HD videos in both CGI animation and live action. I had one of these on one and a BodyGuardz on the other. I had them stacked on top of each other to compare real time. Consistently the TETHYS protectors showed more clarity and detail. The installation was fairly simple, like any other screen protector. Except these come with a nice guide that clips on the phone. Line up the top of the protector with the top of the bracket and slowly drop in place. Super simple. To those that complained about bubbles or not sticking, I didn’t experience any of this. On either phone. I have installed literally dozens, if not hundreds, of screen protectors over my lifetime (I’m a tech fanatic and work in the IT industry) and these are the same as any others of “quality” I’ve used or installed. The installation method and attention to detail is crucial. The screen of the phone needs to be painstakingly clean of all dust, oils, etc. The included wet and dry wipes as well as the stickers helped, but I did rely on my own microfiber cloth I use on my Rayban sunglasses. This allowed me to scrub to make sure it was clean as could be. Another tip is to look at the screen from all angles in the light to find anything missed. After you lay the screen and the air starts to move out, look for missed specs of dust. If you see one, carefully peel it back up from the closest corner and use the included dust stickers to remove the dust from the protector or phone screen. If you have a stubborn bubble, raise it up in the same manner and let it fall again, assisting with sticking that part first. Installation was flawless on both our phones and I’ve used them a week now without any issues whatsoever. I use these with several different cases, including the (now returned) BodyGuardz from at&t, a few knockoff from those mall kiosks (the better half likes the pretty ones) and Otterbox Symmetry’s. The only downside I can think of is the lack of a microfiber cloth in the kit. To me, this is a necessity to get a good clean surface to adhere to. I strongly recommend these. Don’t pass them up. Don’t waste your money on $40-$60 ones from the stores. Those are not always better, as I have now proven. Lifetime warranty means nothing when you have to pay for shipping on the new ones (Zagg). Shipping is as much as 3 new ones like this. For me, I’m a Tethys for life!

Good product

So far so good! Looks nice and is barely noticeable. Screen protector works great and was easy to install with no bubbles. Installation kit comes with a guide for even placing which was amazing. Although it’s a 3 pack I’ll be purchasing another set to ensure I have a backup set.

Best iPhone Xs Max Screen Protector for naked users

The screen protector is truly edge to edge and covers everything besides the front earpiece. This is a 3-pack although you will only need one because you will not mess up putting this on. There is a snap on guide that goes on top of the iPhone before applying the screen protector. Note that you may not be able to use it with some cases because this is full edge to edge. Disclaimer: This product was received for an unbiased review.

Full Reviews